The weld pool surface provides important information for understanding arc welding processes. In this study, a novel vision sensor is proposed to measure the three-dimensional shape of the free weld pool surface. A pulsed laser is projected on to the weld pool through a specific grid. Specular reflection from the pool surface is sensed using a high shutter speed camera. The three-dimensional weld pool surface shape is clearly shown by the specular reflection. To determine the shape of the pool surface, an image processing technology has been developed to extract the skeleton of the specular reflection from the acquired image. The imaging principle is analysed to determine the correlation between the reflection and the weld pool surface. If the weld pool surface is known, the corresponding specular reflection can be directly calculated using the imaging model which is derived based on the reflection law. However, no explicit models can be obtained to determine the weld pool surface using the reflection and sensor parameters. To solve this difficulty, an iterative algorithm is proposed. The weld pool surface can now be calculated in 1 second from the specular reflection of the weld pool surface. A higher calculation speed is currently being pursued.
RokhlinS. I.GuuA. C.A study of arc force, pool depression, and weld penetration during gas tungsten arc welding. Weld. J., 1993, 72(8), 381s–390s.
2.
LinM. L.EagarT. W.Influence of surface depression and convection on arc weld pool geometry. In Transport phenomena in material processing (Eds ChenM. M.MazumderJ.TuckerC. L.III), 13–18 November 1983, ASME PED-10, pp. 63–69 (American Society of Mechanical Engineers, New York).
3.
LinM. L.EagarT. W.Influence of arc pressure on weld pool geometry. Weld. J., 1985, 64(6), 163s–169s.
4.
ZhangY. M.CaoZ. N.KovacevicR.Numerical analysis of fully penetrated weld pools in gas tungsten arc welding. Proc. Instn Mech. Engrs, Part C, 1996, 210(C2), 187–195.
5.
TsaiM. C.KouS.Electromagnetic-force-induced convection in weld pools with a free surface. Weld. J., 1990, 69(6), 241s–246s.
6.
ChooR. T. C.SzekelyJ.WesthoffR. C.Modeling of high-current arcs with emphasis on free surface phenomena in the weld pool. Weld. J., 1990, 69(9), 346s–361s.
7.
KimJ.-W.NaS.-J.A study on the three-dimensional analysis of heat and fluid flow in gas metal arc welding using boundary-fitted coordinates. In Welding and joining processes (Eds Kannatey-AsibuE.JrChoH. S.FukudaS.), 1–6 December 1991, ASME PED-51, pp. 159–173 (American Society of Mechanical Engineers, New York).
8.
KimJ.-W.NaS.-J.Effect of weld pool deformation on weld penetration in stationary gas tungsten arc welding. Weld. J., 1992, 71(5), 179s–192s.
9.
RenwickR. J.RichardsonR. W.Experimental investigation of GTA weld pool oscillations. Weld. J., 1983, 62(2), 29s–35s.
10.
ZacksenhouseM.HardtD. E.Weld pool impedance identification for size measurement and control. Trans. ASME, J. Dynamic Systems, Measmt and Control, 1983, 105(3), 179–184.
11.
TamA. S.HardtD. E.Weld pool impedance for pool geometry measurement: Stationary and nonstationary pools. Trans. ASME, J. Dynamic Systems, Measmt and Control, 1989, 111(4), 545–553.
12.
XiaoY. H.Ouden denG.A study of GTA weld pool oscillation. Weld. J., 1990, 69(8), 298s–293s.
13.
SorensenC. D.EagarC. D.Measurement of oscillations in partially penetrated weld pools through spectral analysis. Trans. ASME, J. Dynamic Systems, Measmt and Control, 1998, 112(3), 463–468.
14.
YooC. D.Effects of weld pool conditions on pool oscillation. PhD dissertation, The Ohio State University, 1990.
15.
XiaoY. H.den OudenG.Weld pool oscillation during GTA welding of mild steel. Weld. J., 1993, 72(8), 428s–434s.
16.
NagarajanS.BanerjeeP.ChenW. H.ChinB. A.Control of the welding process using infrared sensors. IEEE Trans. Robotics and Automn, 1992, 8(1), 86–93.
BanerjeeP.ChinB. A.Front-side-sensor-based dynamic weld penetration control. 1993 AWS Convention, Houston, Texas, 25–29 April 1993, Abstracts of papers, pp. 10–11 (AWS).
20.
BeardsleyH. E.ZhangY. M.KovacevicR.Infrared sensing of full penetration state in gas tungsten arc welding. Int. J. Mach. Tool and Mfg, 1994, 34(8), 1079–1090.
LottL. A.Ultrasonic detection of molten/solid interfaces in weld pools. Mater. Evaluation, 1983, 42, 337–341.
23.
LottL. A.JohnsonJ. A.SmarttH. B.Real-time ultrasonic sensing of arc welding process. Proceedings of 1983 Symposium on Nondestructive evaluation applications and materials processing, Metals Park, Ohio, 1984, pp. 13–22 (ASM International).
24.
JohnsonJ. A.CarlsonN. M.LottL. A.Ultrasonic wave propagation in temperature gradients. J. Nondestructive Evaluation, 1988, 6(3), 147–157.
25.
CarbonN. M.JohnsonJ. A.Ultrasonic sensing of weld pool penetration. Weld. J., 1988, 67(11), 239s–246s.
26.
RokhlinS. I.ChoK.GuuA. C.Closed-loop process control of weld penetration using real-time radiography. Mater. Evaluation, 1989, 47, 363–369.
27.
GuuA. C.RokhlinS. I.Computerized radiographic weld penetration control with feedback on weld pool depression. Mater. Evaluation, 1989, 47, 1204–1210.
28.
CannonI.MaramJ.SmithM.Weld penetration sensor for an experimental welder. Trans. NAMRC/SME, 1987, XV..
29.
ZhangY. M.Determining joint penetration in GTAW with vision sensing of weld face geometry. Weld. J., 1993, 72(10), 463s–469s.
30.
ZhangY. M.KovacevicR.WuL.Closed-loop control of weld penetration using front-face vision sensing, Proc. Instn Mech. Engrs, Part I, 1993, 207(11), 27–34.
31.
ZhangY. M.KovacevicR.WuL.Dynamic analysis and identification of gas tungsten arc welding process for weld penetration control. Trans. ASME, J. Engng for Industry, 1996, 118(1), 123–136.
32.
KovacevicR.ZhangY. M.Apparatus and method for measuring 3-D weld pool shape. US Pat. 5,481,085, 2 January 1996.
33.
KovacevicR.ZhangY. M.RuanS.Sensing and control of weld pool geometry for automated GTA welding, Trans. ASME, J. Engng for Industry, 1995, 117(2), 210–223.
34.
CookG. E.Robotics arc welding: Research in sensory feedback control, IEEE Trans. Ind. Electronics, 1983, IE-30(3).
35.
ZhangY. M.KovacevicR.WuL.Sensitivity of front-face weld geometry in representing the full penetration, Proc. Instn Mech. Engrs, Part B, 1992, 206(B3), 191–197.
36.
AgapakisJ. E.Joint tracking and adaptive robotic welding using vision sensing of weld joint geometry. Weld. J., 1986, 65(11), 33–41.
37.
KleinM. V.FurtakT. E.Optics, 1986, Ch. 3 (John Wiley, New York).
38.
KovacevicR.ZhangY. M.Machine vision recognition of weld pool in gas tungsten arc welding. Proc. Instn Mech. Engrs, Part B, 1995, 209(B2), 141–152.
39.
HoffmanT.Real-time imaging for process control. Advanced Mater. and Processes, 1991, 140(3), 37–43.
40.
Dawson-HoweK. M.VernonD.Simple pinhole camera calibration. Int. J. Imaging Systems and Technol., 1994, 5, 1–6.
41.
KovacevicR.ZhangY. M.Real-time image processing for monitoring of free weld pool surface. Trans. ASME, J. Engng for Industry, November 1996, 118(4).
