Statistical Mechanics Material Model for the Constitutive Modelling of Elastomeric Compounds

Abstract

Material models for the finite element analysis (FEA) of polymeric and elastomeric compounds are only available in limited form in most commercial finite element (FE) packages. The most common are the phenomenological Mooney-Rivlin and the Ogden models, for which the constants bear no relationship to the physical or chemical characteristics of the rubber and their derivation is difficult. Both models are limited in their accuracy for filled rubbers used in combined states of tensile and compressive deformation, and since these are common operational conditions for engineering components such as drive couplings, engine mounts and torsional vibration dampers, their use in engineering analyses is restricted.

In this paper a statistical mechanics material modelling approach for synthetic, filled elastomeric compounds in FEA is presented. Using styrene-butadiene rubber (SBR) as an example, the theory and its application in the commercially available ABAQUS finite element analysis program is explained. FE models of tensile and compressive specimens in two and three dimensions are used to demonstrate the use of the model, and results are presented, discussed and compared with measured data. Good correlation in both tension and compression is demonstrated. A practical application of the model to the SBR blocks in a Holset torsional drive coupling is presented; this analysis involves complex issues of mesh design and contact modelling. The results show good agreement with measured performance, and clearly demonstrate how this type of material modelling approach can be effectively used in the computer aided engineering and design of engineering rubber components.

Keywords

elastomeric compounds finite element analysis statistical mechanics material model rubber deformation drive coupling mechanical power transmission

Get full access to this article

View all access options for this article.

References

Lindley

P. B.

Engineering design with natural rubber, 1978 (MRPRA, Hertford).

Stern

H. J.

History. In Rubber technology and manufacture ( Blow

C. J.

), 1971, pp. 1–19 (Butterworths, London).

Campbell

W. S.

Styrene-butadiene rubber (SBR) and polybutadiene rubber (BR). In Rubbers handbook ( Mernagh

L. R.

), Design Engineering Series, 1969, pp. 129–134 (Morgan-Grampian, London).

Coveney

V. A.

Ahmadi

H. R.

Use of filled rubber for isolation of noise and vibration. Proceedings of Acoustics '90, 1990 Spring Conference, Vol. 12, Part 1, 1990, pp. 391–400 (Institute of Acoustics).

Yeoh

O. H.

Characterisation of elastic properties of carbon black filled rubber vulcanizates. Rubb. Chemistry and Technol., 1990, 63, 792–805.

Mullins

Mechanical behaviour of polymers—accomplishments and problems. In Elastomers: criteria for engineering design (Eds Hepburn

Reynolds

R. J. W.

), 1979, Ch. 1, pp. 1–18 (Applied Science Publishers, London).

Mooney

A theory of large elastic deformation. J. Appl. Physics, 1940, 11, 582–592.

Rivlin

R. S.

Large elastic deformations of isotropic materials. Part I, fundamental concepts. Phil. Trans. R. Soc., 1948, A240, 459–490.

Ogden

R. W.

Large deformation isotropic elasticity—on the correlation of theory and experiment for incompressible rubberlike solids. Proc. R. Soc. Lond., 1972, A326, 565–584.

10.

Valanis

K. C.

Landel

R. F.

The strain energy function of a hyperelastic material in terms of the extension ratios. J. Appl. Physics, 1967, 38, 2997–3002.

11.

Wang

M. C.

Guth

E. J.

Statistical theory of networks of non-Gaussian flexible chains. J. Chem. Physics, July 1952, 20(7), 1144–1157.

12.

Flory

P. J.

Rehner

Statistical mechanics of cross-linked polymer networks. Part 1, rubberlike elasticity. J. Chem. Physics, November 1943, 11(11), 512–520.

13.

Treloar

L. R. G.

The elasticity of a network of long chain molecules, Part III. Trans. Faraday Soc., 1946, 42, 83–94.

14.

Kuhn

Grün

Beziehungen zwischen Elastischen Konstanten und Dehnungsdoppelbrechung Hochelastischer Stoffe. Kolloid Z., December 1942, 191(3), 248–271.

15.

Arruda

E. M.

Boyce

M. C.

A three-dimensional contitutive model for the large stretch behaviour of rubber elastic materials. J. Mechanics and Physics of Solids, 1983, 41, 389–412.

16.

Hibbitt

H. D.

Karlsson

Sorenson

ABAQUS users manual, Version 5.2, 1992 (HKS Inc., Providence, Rhode Island).

17.

Analysis of Rubber Components with ABAQUS. Course notes. Course held at Warrington, June 1992.

18.

ASTM Standard D2000, 1987.

19.

Davies

C. K. L.

De Dilip

Thomas

A. G.

Characterisation of the behaviour of rubber for engineering design purposes. Rubb. Chemistry and Technol., 1994, 67, 716–728.