Using near Infrared Spectroscopy for Rapid Quantification of Sediment Dust in the Indoor Environment

Abstract

The aim of this study was to develop and apply a novel sensitive technique, using near infrared (NIR) reflectance spectroscopy in the 1250–2400 nm region, to account for small amounts of sediment dust that settle on indoor surfaces. In order to quantitatively characterise the dust loading process and to determine the range of applicability, two composition mixture models, representing homogeneity (talc powder) and heterogeneity [dust analogue: Environmental Protected Agency (EPA) dust] of chemical compounds, were examined. A wind tunnel was constructed in order to quantitatively characterise the dust-loading process in a simulated environment. The influence of total mass loaded and the sensitivity of spectral measurements were tested. Based on the significant results in the simulated environment, a field study was conducted in different indoor environments in the Tel-Aviv area. Multivariate data analysis based on partial least squares regression was run to predict the dust loads solely from reflectance data. Different spectral manipulations were tested. The relative standard error for validation sets accepted for indoor dust was found to be low (11.5%). We conclude that this methodology can be employed to assess dust in an indoor environment for small and relatively high dust content (ranging between 0.01 mg cm⁻² to 0.51 mg cm⁻² for artificial mixtures and between 0.02 mg cm⁻² to 0.45 mg cm⁻² for field study, respectively).

Keywords

sediment dust indoor dust loadings NIR spectroscopy

Get full access to this article

View all access options for this article.

References

Shneider

, “Sampling of Surface Dust in Buildings”, in Indoor Environment: Airborne Particles and Settled Dust, Ed by Morawska

Salthammer

, Wiley-VCH, Weinheim, Germany, pp. 82–104) (2004).

International Union of Pure and Applied Chemistry, (a) Physical Chemistry Division, Commission on Molecular Structure and Spectroscopy and (b) Clinical Chemistry Division, Commission on Quantities and Units , Pure Appl. Chem. 57(1), 105–120 (1985).

Hobert

, “Characterization of atmospheric dust sediments by using infrared spectroscopy: Dust spectra and an analytical model”, Vib. Spectrosc. 9(2), 169–179 (1995). doi: 10.1016/0924-2031(94)00085-U

Arimota

Balsam

Schloesslin

, “Visible spectroscopy of aerosol particles collected on filters: Iron-oxide minerals”, Atmos. Environ. 36(1), 89–96 (2002). doi: 10.1016/S1352-2310(01)00465-4

Ong

C.H.

Cudahy

T.J.

Caccetta

M.S.

Piggott

M.S.

, “Deriving quantitative dust measurements related to iron ore handling from airborne hyperspectral data”, Mining Technology: IMM Transactions section A, 112(3), 158–163 (2003).

US Environmental Protected Agency (EPA) . Sampling House Dust for Lead. Final Report No. 747-R-95-007, Washington, DC, USA (2000).

Esbensen

, Multivariate Data Analyses, an Introduction to Multivariate Data Analyses and Experimental Design. 5th Edition. Aalborg University, CAMO, Esbjerg, Denmark (2002).

Ben-Dor

Banin

, “Near-Infrared Reflectance Analysis of Carbonate Concentration in Soils”, Appl. Spectrosc. 44(6), (1990). doi: 10.1366/0003702904086821

Mark

, “Quantitative Spectroscopic Calibration,” in Encyclopedia of Analytical Chemistry: Applications, Theory, and Instrumentation, Ed by Meyers

R.A.

, John Wiley & Sons Ltd, Chichester, UK (2000).

10.

Adams

, Chemometrics in Analytical Spectroscopy. Royal Society of Chemistry, Cambridge, UK (1995).

11.

Singer

R.B.

Roush

T.L.

, “Spectral reflectance properties of particulate weathered coatings on rocks: Laboratory modeling and applicability to Mars”, Lunar Planet. Sci. 14, 708–709 (1983).

12.

Gilmore

M.S.

Merrill

M.D.

Castaño

Bornstein

Greenwood

J.P.

, “Effect of Mars analogue dust deposition on the automated detection of calcite in visible/near-infrared spectra”, Icarus, 172(2), 641–646 (2004). doi: 10.1016/j.icarus.2004.08.009

13.

Hunt

G.R.

, “Spectral signatures of particulate minerals, in the visible and near-infrared”, Geophysics 42(3), (1977). doi: 10.1190/1.1440721

14.

Clark

R.N.

, in Remote Sensing for the Earth Sciences, Manual of Remote Sensing, Volume 3, 3rd Edition, Ed by Rencz

A.N.

Ryerson

R.A.

, John Wiley & Sons, Inc., New York, USA, pp. 3–58 (1999).

15.

Norris

K.H.

, “History, present status, and future prospects for NIRS”, in Proceedings of an International Conference on Spectroscopy Across the Spectrum, Ed by Creaser

C.S.

Davis

A.M.

, Royal Society of Chemistry, Cambridge, UK, pp. 7–8 (1987).

16.

Gaffey

S.J.

, “Spectral reflectance of carbonate minerals in the visible and near infrared (0.35–2.55 μm): Anhydrous carbonate minerals”, J. Geophys. Res. 92(2), 1429–1440 (1987).