Near infrared reflection spectroscopy was used for in-line monitoring of the conversion and the coating thickness of thin UV-cured coatings which have a typical thickness in the range of some micrometers only. Quantitative analysis of the spectral data was carried out by PLS-based multivariate calibration methods. In addition, univariate procedures were tested for some applications. The conversion, in particular its dependence on the applied irradiation dose, was followed in both acrylic coatings, which were cross-linked by free radical polymerisation and in epoxy / vinyl ether blends, which were cured according to a cationic reaction mechanism. The thickness of acrylate coatings was studied in a range between 5 μm and 100 μm. It was shown that quantitative data with high precision and time resolution can be also obtained in pilot scale investigations, even if the coating line is operated at high speed.
HassellD.C. and BowmanE.M., “Process analytical chemistry for spectroscopists”, Appl. Spectrosc.52, 18 A (1998). doi: 10.1366/0003702981942320
2.
BakeevK.A., (Ed), Process analytical technology.Blackwell Publishing, Oxford, UK (2005).
3.
ChangS.Y. and WangN.S., “Monitoring polymerization reactions by near-IR spectroscopy”, in Multidimensional spectroscopy of polymers, Ed by UrbanM.W. and ProvderT.American Chemical Society, Washington, DC, USA, p. 147 (1995).
4.
KradjelC. and McDermottL., “NIR analysis of polymers”, in Handbook of near-infrared analysis, 2nd Edn, Ed by BurnsD.A. and CiurczakE.W.Marcel Dekker, New York, USA, p. 565 (2001).
SantosA.F.SilvaF.M.LenziM.K. and PintoJ.C., “Monitoring and control of polymerization reactors using NIR spectroscopy”, Polym. Plastics Technol. Eng.44, 1 (2005).
7.
FischerD.SahreK.AbdelrhimM.VoitB.SadhuV.B.PionteckJ.KomberH. and HutschenreuterJ., “Process monitoring of polymers by in-line ATR-IR, NIR and Raman spectroscopy and ultrasonic measurements”, C. R. Chimie9, 1419 (2006).
8.
MijovićJ.AndelićS. and KennyJ.M., “In situ real-time monitoring of epoxy / amine kinetics by remote near infrared spectroscopy”, Polym. Adv. Technol.7, 1 (1995).
9.
ReyL.GalyJ.SauterauH.LachenalG.HenryD. and VialJ., “Near-infrared spectroscopy for in situ cure monitoring of dimethacrylate-based networks”, Appl. Spectrosc.54, 39 (2000). doi: 10.1366/0003702001948358
10.
CoatesP.D.BarnesS.E.SibleyM.G.BrownE.C.EdwardsH.G.M. and ScowenI.J., “In-process vibrational spectroscopy and ultrasound measurements in polymer melt extrusion”, Polymer44, 5937 (2003). doi: 10.1016/S0032-3861(03)00544-5
BotellaA.DupuyJ.RocheA.A.SautereauH. and VerneyV., “Photorheometry / NIR spectrometry: An in situ technique for monitoring conversion and viscoelastic properties during photopolymerization”, Macromol. Rapid Commun.25, 1155 (2004).
13.
ScherzerT.MüllerS.MehnertR.VollandA. and LuchtH., “In-line monitoring of the conversion in photopolymerized acrylate coatings on polymer foils using NIR spectroscopy”, Polymer46, 7072 (2005). doi: 10.1016/j.polymer.2005.05.142
14.
ScherzerT. and BuchmeiserM.R., “Photoinitiated cationic polymerization of cycloaliphatic epoxide / vinyl ether systems studied by near-infrared reflection spectroscopy”, Macromol. Chem. Phys.208, 946 (2007). doi: 10.1002/macp.200600649
15.
FouassierJ.P. and RabekJ.F., (Eds.), Radiation curing in polymer science and technology, Vols. 1–4, Elsevier Applied Science, London, UK (1993).
16.
ScherzerT.MehnertR. and LuchtH., “In-line monitoring of the acrylate conversion in UV photopolymerization by near-infrared reflection spectroscopy”, Macromol. Symp.205, 151 (2004). doi: 10.1016/j.polymer.2005.05.142
17.
GodduR.F. and DelkerD.A., “Determination of terminal epoxides by near-infrared spectrophotometry”, Anal. Chem.30, 2013 (1958). doi: 10.1021/ma981078r
18.
MowersW.A.RajaramanS.K.LiuS. and CrivelloJ.V., “Novel hybrid monomers bearing cycloaliphatic epoxy and 1-propenyl ether groups”, Macromolecules32, 36 (1999). 10.1021/ma981078r
19.
RajaramanS.K.MowersW.A. and CrivelloJ.V., “Interaction of epoxy and vinyl ethers during photoinitiated cationic polymerization”, J. Polym. Sci., Polym. Chem.37, 4007 (1999). doi: 10.1002/(SICI)1099-0518(19991101)37:21<4007::AID-POLA15>3.0.CO;2-8
20.
DeckerC.BianchiC.DeckerD. and MorelF., “Photoinitiated polymerization of vinyl ether-based systems”, Progr. Org. Coat.42, 253 (2001). doi: 10.1016/S0300-9440(01)00203-X
21.
KimY.-M.KostanskiL.K. and MacGregorJ.F., “Photopolymerization of 3,4-epoxycyclohexylmethyl-3′,4′-epoxycyclohexane carboxylate and tri (ethylene glycol) methyl vinyl ether”, Polymer44, 5103 (2003). doi: 10.1016/S0032-3861(03)00573-1
