Embedded Wind Turbine Generation into AC Weak Distribution Grids

Abstract

A specific wind turbine (WT) generation scheme is used and a control strategy is studied, not only to increase the efficiency of the WT but also to limit the influence on the alternating current (AC) distribution grid. The system is a variable-speed wind-energy conversion scheme, including a synchronous generator with two three-phase stator windings displaced by 30°, which are connected to the AC distribution grid through DC links with Voltage Source Inverters (VSI). A state feedback controller has been designed, using the pole placement technique, to maximize the wind-energy capture. The controller of the DC link secures a smooth supply of the WT electric power to the distribution AC grid by supporting the output voltage and reducing the harmonic distortion. The operation of the proposed system and the efficiency of the control strategy are demonstrated and tested using simulation techniques.

Keywords

Wind turbine with variable speed modelling control stability VSI

References

Abdin

Ezzeldin S.

Wilson

, Control Design and Dynamic Performance Analysis of a Wind Turbine-Induction Generation Unit, IEEE Trans. on Energy Conversion, vol. 15, No 1, March 2000, pp. 91–96.

Sudhoff

S.D.

, Analysis and Average-Value Modelling of Dual Line-Commutated Converter – 6-phase Synchronous Machine Systems, IEEE Trans. on Energy Conversion, vol. 8, No 3, September 1993, pp. 411–417.

Krause

P.C.

, Analysis of Electric Machinery, New York, McGraw Hill Book Co., 1986.

Muljadi

Butterfield

C.P.

, Pitch-Controlled Variable-Speed Wind Turbine Generation, IEEE Trans. on Industry Applications, vol. 37, No. 1, January–February 2001, pp. 240–246.

Bhowmik

Spee

Enslin

J.H.R.

, Performance Optimization for Doubly Fed Wind Power Generation Systems, IEEE Trans. on Industry Applications, vol. 35, No. 4, July–August 1999, pp. 949–958.