This paper discusses the laboratory testing of wall-like reinforced concrete (RC) columns externally confined with glass fiber reinforced polymer (GFRP) laminates and subjected to pure axial load. Specimens were characterized by an overall length of 3.05 m (10 ft), cross-sectional dimensions of 356 by 1,041 mm (14 by 41 in). Three specimens were tested: one was unstrengthened (benchmark) and two were confined with GFRP laminates. Two different confining reinforcement ratios were considered. The experimental investigation aimed at characterizing: the confinement contribution in terms of axial strength and prevention of instability of longitudinal bars, and the sensitivity of any enhancement in performance to the confining reinforcement ratio. The experimental axial stress – axial strain curves are also discussed.
ACI 318–63 (1963). Building Code Requirements for Reinforced Concrete, American Concrete Institute, Farmington Hills, MI, USA.
2.
ACI 440.2R (2008). Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening of Concrete Structures, American Concrete Institute, Farmington Hills, MI, USA.
3.
ACI 318–08 (2008). Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, MI, USA.
4.
CarreiraD.I. and ChuK.H. (1986). “Stress-strain relationship for plain concrete in compression”, Journal of the American Concrete Institute, Vol. 83, No. 5, pp. 873–873.
5.
De LucaA. and NanniA. (2011). “Single–parameter methodology for the prediction of the stress-strain behavior of FRP-confined RC square columns”, Journal of Composites for Construction, ASCE, Vol. 15, No. 3, pp. 384–392.
6.
De LucaA.NardoneF.MattaF.NanniA.LignolaG.P. and ProtaA. (2011). “Structural evaluation of full-scale FRP-confined reinforced concrete columns”, Journal of Composites for Construction, ASCE, Vol. 15, No. 1, pp. 112–123.
7.
LamL. and TengJ.G. (2003). “Design-oriented stress-strain model for FRP-confined concrete in rectangular columns”, Journal of Reinforced Plastic Composites, Vol. 22, No. 13, pp. 1149–1186.
8.
LiB. and LimC.L. (2010). “Tests on seismically damaged reinforced concrete structural walls repaired using fiber-reinforced polymers”, Journal of Composites for Construction, ASCE, Vol. 14, No. 5, pp. 597–608.
9.
LyseI. and KreidlerL. (1932). “Fourth progress report on column tests at Lehigh University”, Journal of American Concrete Institute Proceedings, Vol. 28, No. 1, pp. 317–346.
10.
LyseI. (1933). “Fifth report on column tests at Lehigh University”, Journal of American Concrete Institute Proceedings, Vol. 29, pp. 433–442.
11.
ManderJ.B.PriestleyM.J.N. and ParkR. (1988). “Theoretical stress-strain model for confined concrete”, Journal of Structural Engineering, ASCE, Vol. 114, No. 8, pp. 1804–1826.
12.
MatthysS.ToutanjiH. and TaerweL. (2006) “Stress-strain behaviour of large scale circular columns confined with FRP composites”, Journal of Structural Engineering, ASCE, Vol. 132, No. 1, pp. 123–133.
13.
NanniA. and BradfordN.M. (1995). “FRP jacketed concrete under uniaxial compression”, Construction and Building Materials, ASCE, Vol. 9, No. 2, pp. 115–124.
14.
PopovicsS. (1973). “A numerical approach to the complete stress-strain curve of concrete”, Cement and Concrete Research, Vol. 3, No. 5, pp. 583–599.
15.
ProtaA.ManfrediG. and CosenzaE. (2006). “Ultimate behavior of axially loaded RC wall-like columns confined with GFRP”, Composites: Part B, Vol. 37, No. 7–8, pp. 670–678.
16.
RichartF.E. (1933). “Reinforced concrete column investigation”, Journal of American Concrete Institute Proceedings, Vol. 29, No. 2, pp. 275–284.
17.
RichartF.E. and BrownR.L. (1934). An Investigation of Reinforced Concrete Columns, Bulletin no. 267, University of Illinois Engineering Experiment Station, Illinois, USA.
18.
RoccaS.GalatiN. and NanniA. (2006). Experimental Evaluation of FRP Strengthening of Large Size Reinforced Concrete Columns, Rep. No. 06–63, Center for Infrastructure Engineering Studies (CIES), University of Missouri-Rolla, Rolla, Mo, USA
19.
RoccaS.GalatiN. and NanniA. (2008). “Review of design guidelines for FRP confinement of reinforced concrete columns of noncircular cross sections”, Journal of Composites for Construction, ASCE, Vol. 12, No. 1, pp. 80–92.
20.
SaadatmaneshH.EhsaniM.R. and JinL. (1997). “Repair of earthquake-damaged RC columns with FRP wraps”, ACI Structural Journal, Vol. 94, No. 2, pp. 206–215.
21.
SlaterW.A. and LyseI. (1931a). “First progress report on column tests at Lehigh University”, Journal of American Concrete Institute Proceedings, Vol. 27, No. 2, pp. 677–730.
22.
SlaterW.A. and LyseI. (1931b). “Second progress report on column tests at Lehigh University”, Journal of American Concrete Institute Proceedings, Vol. 27, No. 3, pp. 791–835.
23.
SlaterW.A. and LyseI. (1931c). “Third progress report on column tests at Lehigh University”, Journal of American Concrete Institute Proceedings, Vol. 28, No. 11, pp. 159–166.
24.
TanK.H. (2003). “Strength enhancement of rectangular RC columns using FRP”, Journal of Composites for Construction, ASCE, Vol. 6, No. 3, pp. 175–183.
25.
TanwongsvalS.MaalejM. and ParamasivamP. (2003). “Strengthening of RC wall-like columns with FRP under sustained loading”, Materials and Structures Journal, Vol. 36, No. 5, pp. 282–290.
