Numerical and Experimental Investigation on Eccentric Loading Behavior of RC Columns Strengthened with SCC Filled Square Steel Tubes

Abstract

Self-compacting Concrete Filled Square steel Tubes (SCFST) is used to strengthen square RC columns. In order to investigate the eccentric loading behavior of the strengthened columns, a generic fiber element model is proposed. The ultimate strengths and the complete load-deflection response at the mid-height of the strengthened columns are predicted by the model in the aid of computational procedure. To verify the accuracy of the computational results, related experiments have been performed. The obtained experimental results were then compared with the computational results. After finding close agreement between them, the effects of extensive experimental parameters on the behavior of strengthened columns are investigated, including tube wall thickness, concrete compressive strength and initial eccentricity. Furthermore, a simple design formula based on the verified model is proposed to calculate the ultimate strength of eccentrically compressed strengthened columns. The calculation results agree well with the experimental results.

Keywords

reinforced concrete columns strengthening square steel tubes self-compacting concrete eccentric loads

References

Abedi

Afshin

and Shirazi

M.R.N.

(2010). “Numerical study on the seismic retrofitting of reinforced concrete columns using rectified steel jackets”, Asian Journal of Civil Engineering, Vol. 11, No. 2, pp. 219–240.

Aslani

and Nejadi

(2012). “Bond behavior of reinforcement in conventional and self-compacting concrete”, Advances in Structural Engineering, Vol.15, No.12, pp. 2033–2052.

Bai

Y.L.

Dai

J.G.

and Teng

J.G.

(2014). “Cyclic compressive behavior of concrete confined with large rupture strain FRP composites”, Journal of Composites for Construction, ASCE, Vol. 18, No. 1.

Chang

Huang

C.K.

Jiang

D.C.

and Song

Y.C.

(2009). “Push-out test of pre-stressing concrete filled circular steel tube columns by means of expansive cement”, Construction and Building Materials, Vol. 23, No. 1, pp. 491–497.

Chen

J.F.

and Teng

J.G.

(2003). “Shear capacity of fiber-reinforced polymer-strengthened reinforced concrete beams: Fiber reinforced polymer rupture”, Journal of Structural Engineering, ASCE, Vol. 129, No. 5, pp. 615–625.

Colomb

Tobbi

Ferrier

and Hamelin

(2008). “Seismic retrofit of reinforced concrete short columns by CFRP materials”, Composite Structures, Vol. 82, No. 4, pp. 475–487.

Dai

J.G.

Bai

Y.L.

and Teng

J.G.

(2011). “Behavior and modeling of concrete confined with FRP composites of large deformability”, Journal of Composites for Construction, ASCE, Vol. 15, No. 6, pp. 963–973.

Dai

J.G.

and Ueda

(2012). “Strength and deformability of concrete members wrapped with fibre-reinforced polymer composites with a large rupture strain”, Innovative Materials and Techniques in Concrete Construction, pp. 225–241.

Elremaily

and Azizinamini

(2002). “Behavior and strength of circular concrete-filled tube columns”, Journal of Constructional Steel Research, Vol. 58, No. 12, pp. 1567–1591.

10.

GB50017 (2003). Code for Design of Steel Structures, National Standards of the People's Republic of China, Beijing, China. (in Chinese)

11.

Guo

L.H.

Zhang

S.M.

and Xu

(2011). “Behaviour of filled rectangular steel HSS composite columns under bi-axial bending”, Advances in Structural Engineering, Vol. 14, No. 2, pp. 95–306.

12.

Han

L.H.

You

J.T.

and Lin

X.K.

(2005). “Experimental behaviour of self-consolidating concrete (SCC) filled hollow structural steel (HSS) columns subjected to cyclic loadings”, Advances in Structural Engineering, Vol. 8, No. 5, pp. 497–512.

13.

Han

L.H.

(2007). Concrete-Filled Steel Tube Columns, Science Publishing Company, Beijing, China. (in Chinese)

14.

Holschemacher

(2004). “Hardened material properties of self-compacting concrete”, Journal of Civil Engineering and Management, Vol. 10, No. 4, pp. 261–266.

15.

Khayat

K.H.

(1999). “Workability, testing, and performance of self-compacting concrete”, ACI Materials Journal, Vol. 96, No. 3, pp. 346–353.

16.

Liang

Q.Q.

and Fragomeni

(2009). “Nonlinear analysis of circular concrete-filled steel tubular short columns under axial loading”, Journal of Constructional Steel Research, Vol. 65, No. 12, pp. 2186–2196.

17.

Loser

, and Leemann

(2009). “Shrinkage and restrained shrinkage cracking of self-compacting concrete compared to conventionally vibrated concrete”, Materials and Structures, Vol. 42, No. 1, pp. 71–82.

18.

F.W.

S.P.

and Sun

G.J.

(2007). “A study on the behavior of eccentrically compressed square concrete-filled steel tube columns”, Journal of Constructional Steel Research, Vol. 63, No. 7, pp. 941–948.

19.

Y.Y.

Gong

T.N.

Zhang

X.P.

and Xue

J.F.

(2013). “Experimental research on behavior of circular RC column strengthened with self-compacting concrete filled circular steel jacket under axial loading”, Journal of Building Structures, Vol. 34, No. 6, pp. 121–128. (in Chinese)

20.

Miller

E.A.

(2006). Experimental Research of Reinforced Concrete Column Strengthening Methods, Master Thesis, The Ohio State University, USA.

21.

Priestley

M.J.N.

Seible

Xiao

and Verma

(1994). “Steel jacket retrofitting of reinforced concrete bridge columns for enhanced shear strength-part 1: Theoretical considerations and test design”, ACI Structural Journal, Vol. 91, No. 4, pp. 394–405.

22.

Priestley

M.J.N.

Seible

Xiao

and Verma

(1994). “Steel jacket retrofitting of reinforced concrete bridge columns for enhanced shear strength-part 2: Test results and comparison with Theory”, ACI Structural Journal, Vol. 91, No. 5, pp. 537–551.

23.

Roeder

C.W.

Cameron

and Brown

C.B.

(1999). “Composite action in concrete filled tubes”, Journal of Structural Engineering, ASCE, Vol. 125, No. 5, pp. 477–484.

24.

Sezen

and Miller

E.A.

(2011) “Experimental evaluation of axial behavior of strengthened circular reinforced-concrete columns”, Journal of Bridge Engineering, ASCE, Vol. 16, No. 2, pp. 238–247.

25.

Teng

J.G.

Chen

J.F.

Smith

S.T.

and Lam

(2003). “Behaviour and strength of FRP-strengthened RC structures: A state-of-the-art review”, Proceedings of the ICE-Structures and Buildings, Vol 156, No. 1, pp. 51–62.

26.

Wang

M.H.

(2011). “Experimental study on axial compression reinforced concrete column strengthened by circular steel tube”, Applied Mechanics and Materials, Vol. 94, pp. 1261–1270.

27.

Xiao

and Wu

(2003). “Strengthening of reinforced concrete columns using partially stiffened steel jackets”, Journal of Structural Engineerting, ASCE, Vol. 129, No. 6, pp. 725–732.

28.

Wong

Y.L.

and Teng

J.G.

(2010). “Technical Papers: Behavior of hybrid frp-concrete-steel double-skin tubular columns subjected to eccentric compression”, Advances in Structural Engineering, Vol. 13, No. 5, pp. 961–974.

29.

Zhou

J.W.

and Duan

J.M.

(2012). “Experimental study on the axial loading tests of RC columns strengthened with steel tube”, Applied Mechanics and Materials, Vol. 204, pp. 2878–2882.

30.

Zhu

Gibbs

J.C.

and Bartos

P.J.M.

(2001). “Uniformity of in situ properties of self-compacting concrete in full-scale structural elements”, Cement and Concrete Composites, Vol. 23, No. 1, pp. 57–64.