Seismic Damage Assessment of RC Members by a Modified Park-Ang Model

Abstract

Quantitative assessment of seismic damage by using damage models has been proved feasible and effective in controlling the earthquake-induced damage of structures. In this study, a modification is proposed for the original Park-Ang model by eliminating its non-normalization problem. The combination coefficient of the modified model is derived using the cyclic test results of flexure-dominant RC members from the database provided by the Pacific Earthquake Engineering Research Center and the author's own tests. An empirical formula is developed through multivariable nonlinear regression analysis to relate the combination coefficient with three design parameters. The comparison between the modified model and the original model indicates that the damage index of flexure-dominant RC members can be determined by the modified model with higher precision and smaller scatter. At last, the damage indexes at principle damage states are calculated by the modified model.

Keywords

reinforced concrete structures seismic damage damage model performance-based seismic design

References

Ang

A.H.S.

and de Leon

(1994). “Reliability and response control of R/C buildings”, ASCE Structures Congress XII, ASCE, Georgia, USA, pp. 1593–1599.

Atalay

M.B.

and Penzien

(1975). The Seismic Behavior of Critical Regions of Reinforced Concrete Components as Influenced by Moment, Shear and Axial Force, Report No. EERC 75–19, University of California, Berkeley, USA.

Azizinamini

Johal

L.S.

Hanson

N.W.

Musser

D.W.

and Corley

W.G.

(1988). Effects of Transverse Reinforcement on Seismic Performance of Columns-a Partial Parametric Investigation, Project No. CR-9617, Construction Technology Laboratories, Skokie, Illinois, USA.

Bae

and Bayrak

(2008). “Seismic performance of full-scale reinforced concrete columns”, ACI Structural Journal, Vol. 105, No. 2, pp. 123–133.

Bayrak

and Sheikh

(1996). “Confinement steel requirements for high strength concrete columns”, Proceedings of 11th World Conference on Earthquake Engineering, Aculpulco, Mexico.

Bozorgnia

and Bertero

V.V.

(2003). “Damage spectra: Characteristics and applications to seismic risk reduction”, Journal of Structural Engineering, ASCE, Vol. 129, No. 10, pp. 1330–1340.

Takemura

and Kawashima

(1997). “Effect of loading hysteresis on ductility capacity of bridge piers”, Journal of Structural Engineering, ASCE, Vol. 43, No. A, pp. 849–858.

CEB-FIP (2003). Displacement-Based Seismic Design of Reinforced Concrete Buildings, International Federation for Structural Concrete, Lausanne, Switzerland.

Chai

Y.H.

Romstad

K.M.

and Bird

S.M.

(1995). “Energy-based linear damage model for high-intensity seismic loading”, Journal of Structural Engineering, ASCE, Vol. 121, No. 5, pp. 857–864.

10.

Chen

L.Z.

X.L.

Jiang

H.J.

and Zheng

J.B.

(2009). “Experimental investigation of damage behavior of RC frame members including non-seismically designed columns”, Earthquake Engineering and Engineering Vibration, Vol. 8, No. 2, pp. 301–311.

11.

Chung

Y.S.

Meyer

and Shinozuka

(1989). “Modeling of concrete damage”, ACI Structural Journal, Vol. 86, No. 3, 259–271.

12.

Cosenza

Manfredi

and Ramasco

(1993). “The use of damage functional in earthquake-resistant design: A comparison among different procedures”, Structural Dynamics and Earthquake Engineering, Vol. 22, pp. 855–868.

13.

Cosenza

and Manfredi

(2000). “Damage indices and damage measures”, Progress in Structural Engineering and Materials, Vol. 2, No. 1, pp. 50–59.

14.

Faria

Oliver

and Cervera

(2004). “Modeling material failure in concrete structures under cyclic actions”, Journal of Structural Engineering, ASCE, Vol. 130, No. 12, pp. 1997–2005.

15.

Galeota

Giammatteo

M.M.

and Marino

(1996). “Seismic resistance of high strength concrete columns”, Proceedings of 11th World Conference on Earthquake Engineering, Aculpulco, Mexico.

16.

Ghee

A.B.

Priestley

M.J.N.

and Park

(1981). Ductility of Reinforced Concrete Bridge Piers under Seismic Loading, Report 81–3, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.

17.

Ghobarah

Abou-Elfath

and Biddah

(1999). “Response-based damage assessment of structures”, Earthquake Engineering & Structural Dynamics, Vol. 28, No. 1, pp. 79–104.

18.

Kanda

Shirai

Adachi

and Sato

(1988). “Analytical study on elasto-plastic hysteretic behaviors of reinforced concrete members”, Transactions of the Japan Concrete Institute, Vol. 10, No. 1, pp. 257–264.

19.

Kono

and Watanabe

(2000). “Damage evaluation of reinforced concrete columns under multiaxial cyclic loadings”, Proceedings of 2nd U.S.-Japan Workshop on Performance-Based Earthquake Engineering Methodology for Reinfoced Concrete Building Structures, Sapporo, Japan.

20.

Kwon

O.S.

and Elnashai

(2006). “The effect of material and ground motion uncertainty on the seismic vulnerability curves of RC structure”, Engineering Structures, Vol. 28, No. 2, pp. 289–303.

21.

Matamoros

A.B.

(1999). Study of Drift Limits for High-Strength Concrete Columns, Department of Civil Engineering, University of Illinois at Urbana-Champaign, USA.

22.

Mehanny

S.S.F.

and Deierlein

G.G.

(2000). Modeling of Assessment of Seismic Performance of Composite Frames with Reinforced Concrete Columns and Steel Beams, Rep. No. 135, The John A. Blume Earthquake Engineering Center, Stanford Univ., Stanford, Calif, USA.

23.

Y.L.

and Wang

S.J.

(2000). “Seismic behavior of RC columns with various tie configurations”, Journal of Structural Engineering, ASCE, Vol. 126, No. 10, pp. 1122–1130.

24.

Moustafa

(2011). “Damage-based design earthquake loads for single-degree-of-freedom inelastic structures”, Journal of Structural Engineering, ASCE, Vol. 137, No. 3, pp. 456–467.

25.

Muguruma

Watanabe

and Komuro

(1989). “Applicability of high strength concrete to reinforced concrete ductile column”, Transactions of the Japan Concrete Institute, Vol. 11, No. 1, pp. 309–316.

26.

Ohno

and Nishioka

(1984). “An experimental study on energy absorption capacity of columns in reinforced concrete structures”, Proceedings of the JSCE, Structural Engineering/Earthquake Engineering, Vol. 1, No. 2, pp. 137–147.

27.

Park

(1989). “Evaluation of ductility of structures and structural assemblages from laboratory testing”, Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 22, No. 3, pp. 155–166.

28.

Park

Y.J.

and Ang

A.H.S.

(1985). “Mechanistic seismic damage model for reinforced concrete”, Journal of Structural Engineering, ASCE, Vol. 111, No. 4, pp. 722–739.

29.

Park

Y.J.

Ang

A.H.S.

and Wen

Y.K.

(1987). “Damage-limiting aseismic design of buildings”, Earthquake Spectra, Vol. 3, No. 1, pp. 1–26.

30.

Paultre

Legeron

and Mongeau

(2001). “Influence of concrete strength and transverse reinforcement yield strength on behavior of high-strength concrete columns”, ACI Structural Journal, Vol. 98, No. 4, pp. 490–501.

31.

PEER (2004). PEER structural performance database, http://nisee.berkeley.edu/spd/.

32.

Powell

G.H.

and Allahabadi

(1988). “Seismic damage prediction by deterministic methods: Concepts and procedures”, Earthquake Engineering & Structural Dynamics, Vol. 16, No. 5, pp. 719–734.

33.

Rodriguez

M.E.

and Padilla

(2009). “A damage index for the seismic analysis of reinforced concrete members”, Journal of Earthquake Engineering, Vol. 13, No. 3, pp. 364–383.

34.

Saatcioglu

and Grira

(1999). “Confinement of reinforced concrete columns with welded reinforcement grids”, ACI Structural Journal, Vol. 96, No. 1, pp. 29–39.

35.

Saatcioglu

and Ozcebe

(1989). “Response of reinforced concrete columns to simulated seismic loading”, ACI Structural Journal, Vol. 86, No. 1, pp. 3–12.

36.

Sakai

Hibi

Otani

and Aoyama

(1990). “Experimental study on flexural behavior of reinforced concrete columns using high-strength concrete”, Transactions of the Japan Concrete Institute, Vol. 12, No. 1, pp. 323–330.

37.

Sheikh

and Uzumeri

S.M.

(1982). “Analytical model for concrete confinement in tied columns”, American Society of Civil Engineers, Journal of the Structural Division, ASCE, Vol. 108, pp. 2703–2722.

38.

Soesianawati

M.T.

Park

and Priestley

M.J.N.

(1986). Limited Ductility Design of Reinforced Concrete Columns, Report 86–10, Department of Civil Engineering, University of Canterbury, New Zealand.

39.

Sugano

(1996). “Seismic behavior of reinforced concrete columns which used ultra-high-strength concrete”, Proceedings of 11th World Conference on Earthquake Engineering, Aculpulco, Mexico.

40.

Takemura

and Kawashima

(1997). “Effect of loading hysteresis on ductility capacity of bridge piers”, Journal of Structural Engineering, ASCE, Vol. 43, No. A, pp. 849–858.

41.

Tanaka

and Park

(1990). Effect of Lateral Confining Reinforcement on the Ductile Behavior of Reinforced Concrete Columns, Report 90–2, Department of Civil Engineering, University of Canterbury, New Zealand.

42.

Teran-Gilmore

and Jirsa

J.O.

(2005). “A damage model for practical seismic design that accounts for low cycle fatigue”, Earthquake Spectra, Vol. 21, No. 3, pp. 803–832.

43.

Thomsen

and Wallace

(1994). “Lateral load behavior of reinforced concrete columns constructed using high-strength materials”, ACI Structural Journal, Vol. 91, No. 5, pp. 605–615.

44.

Watson

and Park

(1989). Design of Reinforced Concrete Frames of Limited Ductility, Report 89–4, Department of Civil Engineering, University of Canterbury, New Zealand.

45.

Wehbe

Saiidi

M.S.

and Sanders

(1998). Confinement of Rectangular Bridge Columns for Moderate Seismic Areas, National Center for Earthquake Engineering Research (NCEER) Bulletin, Vol. 12, No. 1, New Zealand.

46.

Williams

and Sexsmith

(1995). “Seismic damage indexes for concrete structures: A state of the art review”, Earthquake Spectra, Vol. 11, No. 2, pp. 319–349.

47.

Xiao

and Martirossyan

(1998). “Seismic performance of high-strength concrete columns”, Journal of Structural Engineering, ASCE, Vol. 124, No. 3, pp. 241–251.

48.

Zahn

F.A.

Park

and Priestley

M.J.N.

(1986). Design of Reinforced Bridge Columns for Strength and Ductility, Report 86–7, Department of Civil Engineering, University of Canterbury, New Zealand.

49.

Zhou

Satoh

Jiang

Ono

and Shimizo

(1987). “Behavior of reinforced concrete short column under high axial load”, Transactions of the Japan Concrete Institute, Vol. 9, No. 2, pp. 541–548.