An Analytical Solution for the Elastic Lateral-Distortional Buckling of I-section Beams

Abstract

Lateral-distortional buckling may occur in I-section beams with slender webs and stocky flanges. A computationally efficient method is presented in this paper to study this phenomenon. Previous studies on distortional buckling have been on the use of 3^rd and 5^th order polynomials to model the displacements. The present study provides an alternative way, using Fourier Series, to model the behaviour. Beams of different cross-sectional dimensions, load cases and restraint conditions are examined and compared. The accuracy and versatility of the method are verified by calibrating against the results of other published studies. The present method is believed to be a simple and efficient way of determining the buckling load and mode shapes of I-section beams that are susceptible to lateral-distortional buckling modes.

Keywords

lateral-distortional buckling elastic buckling Fourier series structural stability

References

Bradford

M.A.

and Ronagh

H.R.

(1997). “Generalized elastic buckling of restrained I-beams by FEM”, Journal of Structural Engineering, ASCE, Vol.123 No.12, pp. 1631–1637.

Bradford

M.A.

and Trahair

N.S.

(1981). “Distortional buckling of I-beams”, Journal of the Structural Division, ASCE, Vol. 107(ST2), pp. 355–370.

Chin

C.K.

. (1992). “Stability of thin-walled members having arbitrary flange shape and flexible web”, Engineering Structures, Vol.14 No.2, pp. 121–132.

Goltermann

& Svensson

S.E.

(1989). “Lateral distortional buckling: Predicting elastic crtical stress”, Journal of Structural Engineering, ASCE, Vol. 116 No. 5, pp. 1465–1467.

Hancock

G.J.

Bradford

M.A.

and Trahair

N.S.

(1980). “Web distortion and flexural-torsional buckling”, Journal of the Structural Division, ASCE, Vol.106 No.7, pp. 1557–1571.

Poon

C.P.

and Ronagh

H.R.

(2003). “Coupled Local-Lateral Buckling of I-Beams, A Finite Element Model”, Proceedings of the International Conference on Advances in Structures, Sydney, Edited by Hancock , pp. 163–167.

Ronagh

H.R.

and Bradford

M.A.

(1994). “Some notes on finite element buckling formulations for beams”, Computers and Structures, Vol.52 No.6, pp. 1119–1126.

Ronagh

H.R.

Lawther

and Williams

F. W.

(1995). “Calculation of eigenvectors with uniform accuracy”, Journal of Engineering Mechanics, ASCE, Vol. 121 No. 4, pp. 933–955.

van Erp

G.M.

(1989). Advanced Buckling Analysis of Beams With Arbitrary Cross-Sections. University of Eindhoven: The Netherlands.

10.

Williams

F. W.

and Jemah

A.K.

(1987). “Buckling curves for elastically supported columns with varying axial force to predict lateral buckling of beams”, Journal of Constructional Steel Research, Vol. 7 No. 2, pp. 133–147.

11.

Wittrick

W.H.

and Williams

F.W.

(1974). “An algorithm for computing critical buckling loads of elastic structures”, Journal of Structural Mechanics, ASCE, Vol. 1 No. 4, pp. 497–518.