Concrete shrinkage and creep in recycled aggregate concrete-filled steel tubes (RACFST) were experimentally studied and the results were presented in this paper. The measurements on the shrinkage and creep lasted for about eighteen months. The main parameters varied in the tests are: (1) sectional types, circular and square; (2) in-fill concrete types, recycled aggregate concrete (RAC) and normal concrete; and (3) long-term sustained load levels, 0.3 and 0.6. The test results showed that the time-history of the concrete shrinkage and creep in RACFST was similar to that of the corresponding normal CFST. However, the shrinkage and creep strains of RACFST specimens were larger than those of the normal CFST specimens. Finally, the predictive models based on previously issued provision for time-dependent behaviour of the composite member were calibrated with the tests, and recommendations for the calculations on the shrinkage and creep of the concrete core in RACFST were also suggested.
ACI Committee 209. (1992). Prediction of Creep, Shrinkage and Temperature Effects in Concrete Structures, American Concrete Institute, Detroit, MI, USA, ACI 209 R-92.
2.
AjdukiewiczA. and KliszczewiczA. (2002). “Influences of recycled aggregates on mechanical properties of HS/HPC”, Cement & Concrete Composites, Vol. 24, No. 2, pp. 269–279.
3.
Gomez-SoberonJ.M.V. (2003). “Relationship between gas adsorption and the shrinkage and creep of recycled aggregate concrete”, Cement, Concrete and Aggregates, Vol. 25, No. 2, pp. 42–48.
4.
HanL.H. and YangY.F. (2003). “Analysis of thin-walled steel RHS columns filled with concrete under long-term sustained loads”, Thin-Walled Structures, Vol. 41, No. 9, pp. 849–870.
5.
HanL.H.YangY.F.LiY.J. and FengB. (2005). “Hydration heat and shrinkage of HSS columns filled with self-consolidating concrete”, Proceedings of the Fourth International Conference on Advances in Steel Structures, ShenZ.Y.LiG.Q. and ChanS.L., eds., Shanghai, China, June, pp. 647–652.
6.
HanL.H.TaoZ. and LiuW. (2004). “Effects of sustained load on concrete-filled hollow structural steel columns”, Journal of structural engineering, ASCE, Vol. 130, No. 9, pp. 1392–1404.
7.
HansenT.C. (1992). Recycling of Demolished Concrete And Masonry, In HansenT.C. (Ed.), Report of RILEM TC 37-DRC on Demolition and Reuse of Concrete, E&FN Spon, London, UK.
8.
HansenT.C. and BoeghE. (1985). “Elasticity and drying shrinkage of recycled aggregate concretes”, ACI Journal, Vol. 82, No. 5, pp. 648–652.
9.
HoltE.E. (2001). Early Age Autogenous Shrinkage of Concrete, PhD Thesis, Department of Civil and Environmental Engineering, University of Washington, USA.
10.
IchinoseL.H.WatanabeE. and NakaiH. (2001). “An experimental study on creep of concrete filled steel pipes”, Journal of Constructional Steel Research, Vol. 57, No. 4, pp. 453–466.
11.
JoB.TaeG. and KimC. (2007). “Uniaxial creep behavior and prediction of recycled-PET polymer concrete”, Construction and Building Materials, Vol. 21, No. 7, pp. 1552–1559.
12.
KatzA. (2003). “Properties of concrete made with recycled aggregate from partially hydrated old concrete”, Cement and concrete Research, Vol. 33, No. 5, pp. 703–711.
13.
KwonS.H.KimY.Y. and KimJ.K. (2005). “Long-term behaviour under axial service loads of circular columns made from concrete filled steel tubes”, Magazine of Concrete Research, Vol. 57, No. 2, pp. 87–99.
14.
KwonS.H.KimT.H.KimY.Y. and KimJ.K. (2007). “Long-term behaviour of square concrete-filled steel tubular columns under axial service loads”, Magazine of Concrete Research, Vol. 59, No. 1, pp. 53–68.
15.
MorinoS.KawaguchiJ. and CaoZ.S. (1996). “Creep behavior of concrete-filled steel tubular members”, Proceedings of an Engineering Foundation Conference, Composite Construction in Steel and Concrete III, BucknerC.D. and ShahroozB.M., eds., Irsee, Germany, June, pp. 514–525.
16.
NaguibW. and MirmiranA. (2003). “Creep modeling for concrete-filled steel tubes”, Journal of Constructional Steel Research, Vol. 59, No. 11, pp. 1327–1344.
17.
NakaiH.KuritaA. and IchinoseL.H. (1991). “An experimental study on creep of concrete-filled steel pipes”, Proceedings of the Third International Conference on Steel-Concrete Composite Structures, MatsuiC., ed., Fukuoka, Japan, September, pp. 55–60.
18.
RavindrarajahR.S. and TamC.T. (1985). “Properties of concrete made with crushed concrete as coarse aggregate”, Magazine of Concrete Research, Vol. 37, No. 130, pp. 29–38.
19.
RavindrarajahR.S.LooY.H. and TamC.T. (1987). “Recycled concrete as fine and coarse aggregate in concrete”, Magazine of Concrete Research, Vol. 39, No. 141, pp. 214–220.
20.
Sagoe-CrentsilK.K.BrownT. and TaylorA.H. (2001). “Performance of concrete made with commercially produced coarse recycled concrete aggregate”, Cement and Concrete Research, Vol. 31, No. 5, pp. 707–712.
21.
TamuraH.NishioA.OhashiJ. and ImamotoK. (2001). “High quality recycled aggregate concrete (HiRAC) processed by decompression and rapid release”, Proceedings of the Fifth CANMET/ACI International Conference on Recent Advances in Concrete Technology, MalhotraV.M., ed., Singapore, July-August, pp. 491–502.
22.
UyB. (2001). “Static long-term effects in short concrete-filled steel box columns under sustained loading”, ACI Structural Journal, Vol. 98, No. 1, pp. 96–104.
23.
YamatoT.EmotoY. and SoedaM. (1998). “Mechanical properties, drying shrinkage and resistance to freezing and thawing of concrete using recycled aggregate”, Proceedings of the Fourth CANMET/ACI/JCI International Conference on Recent Advances in Concrete Technology, MalhotraV.M., ed., Tokushima, Japan, August, pp. 105–121.
24.
YangY.F. and HanL.H. (2006a). “Compressive and flexural behavior of recycled aggregate concrete filled steel tubes (RACFST) under short-term loadings”, Steel & Composite Structures, Vol. 7, No. 3, pp. 257–284.
25.
YangY.F. and HanL.H. (2006b). “Experimental behavior of recycled aggregate concrete filled steel tubular columns”, Journal of Constructional Steel Research, Vol. 62, No. 12, pp. 1310–1324.
26.
ZhongS.T. (1994). Concrete-Filled Steel Tubular Structures, Heilongjiang Science and Technology Press, Harbin, China. (In Chinese).
