A combined thermodynamic simulation and transient conduction heat transfer through piston has been carried out in this study. In thermodynamic simulation, A computer programme has been developed to study the full operation cycle of a four stroke internal combustion engine. The simulation used to calculate the pressure and temperature field existing in realistic engine combustion chambers for various engine parameters. The one dimensional conduction heat transfer equation has been solved numerically. The results show a good agreement with previous studies where applicable.
AllaAbd G.H., Computer simulation of a four stroke spark ignition engine, Energy Conversion and Management43 (2002) 1043–1061.
2.
Farzaneh-GordM.MaghrebiM. J., and HajializadehH., Optimizing Four Stroke Spark Ignition Engine Performance, The second International conference on Modeling, Simulation, And Applied optimization, Abu Dhabi, UAE, March 24–27 2007.
3.
AlkidasA.C., and ColeR.M., Transient heat-flux measurements in a divided-chamber diesel engine, Trans. ASME, J. Heat Transfer107 (1985) 439–444.
4.
LiuYong, and ReitzR.D., Modeling of heat conduction within chamber walls for multidimensional internal combustion engine simulations, Int J. Heat Mass Transfer.Vol. 41. Nos 6–7. pp. 859–869. 1998.
5.
RakopoulosC.D.RakopoulosD.C.MavropoulosG.C., and GiakoumisE.G., Experimental and theoretical study of the short term response temperature transients in the cylinder walls of a diesel engine at various operating conditions, Applied Thermal Engineering24 (2004), 679–702.
6.
StoneRichard, “Introduction to internal combustion engines”, Department of Engineering Science, University of Oxford, 1999.
WeclasM.MellingA. and DurstF., “Flow Separation In the Inlet Valve Gap Of Piston Engines”, Prog. Energy Combust. Sci.Vol. 24, pp 165–195, 1998.
9.
WoschniG. and FiegerJ.Determination of local heat transfer coefficients at the piston of a high speed diesel engine by evaluation of measured temperature distribution. SAE 790834, 1979.
10.
PinZengAssanis, and DennisN., “Cylinder Pressure Reconstruction and its Application to Heat Transfer Analysis”, 2004 SAE World Congress Detroit, Michigan, March 8–11, 2004, 2004-01-0922.
