In the present paper, a numerical model to study the nonlinear and unsteady aerodynamics of morphing-wing concepts inspired by bird flight is developed. The model includes: i) a wing topology inspired by gull wings; ii) a kinematical model to describe the process of wing adaptation based on one mechanism observed in the flight of gulls (folding-wing approach); and iii) a version of the unsteady vortex-lattice methods (UVLM) that allows taking nonlinear and unsteady aerodynamic phenomena into account. The model was specially developed to study the aerodynamic behavior during wing adaptation. A simulation for a twisting-flapping wing was performed in order to validate the numerical model. The present results are in close agreement with those obtained in previous studies based on the Euler equations, but required much less execution time. The numerical simulations of a bioinspired morphing wing showed the strong dependence between the prescribed kinematics and the aerodynamic characteristics, which evidences the importance of studying the process of wing adaptation. UVLM is shown to be ideal for preliminary analysis of bioinspired morphing wings.
References
1.
SoflaA.Y.N.MeguidS.A.TanK.T.YeoW.K., “Shape morphing of aircraft wing: Status and challenges,”Materials and Design, Vol. 31, No. 3, pp. 1284–1292, 2010.
SandersB.EastepF. E.FosterE., “Aerodynamic and Aeroelastic Characteristics of Wings with Conformal Control Surfaces for Morphing Aircraft,”Journal of Aircraft, Vol. 40, No. 1, pp. 94–99, 2003.
4.
ElzeyD.M.SoflaA.Y.NWadleyH. N. G., “A bio-inspired, high-authority actuator for shape morphing structures,”Proc. SPIE 5053, Smart Structures and Materials 2003: Active Materials: Behavior and Mechanics, August 2003.
5.
AmprikidisM.CooperJ. E., “Development of Smart Spars for Active Aeroelastic Structures,”In: Proceedings of 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, April 2003.
6.
ChakravarthyA.GrantD.T.LindR., “Time-Varying Dynamics of a Micro Air Vehicle with Variable-Sweep Morphing,”Journal of Guidance, Control, and DynamicsVol. 35, No. 3, pp. 890–903, 2012.
7.
BaeJ.S.SeiglerT.M.InmanD.J., “Aerodynamic and Static Aeroelastic Characteristics of a Variable-Span Morphing Wing”, Journal of Aircraft, Vol. 49, No. 3, pp. 528–534, 2005.
8.
BlondeauJ.RichesonJ.PinesD.J., “Design, Development and Testing of a Morphing Aspect Ratio Wing Using an Inflatable Telescopic Spar,” In: Proceedings of 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, April 2003.
9.
BarbarinoS.BilgenO.AjajR. M.FriswellM. I.InmanD. J., “A Review of Morphing Aircraft,”Journal of Intelligent Material Systems and Structures, Vol. 22, No. 9, pp. 823–877, 2011.
KudvaJ. N., “Overview of the DARPA Smart Wing Project,”Journal of Intelligent Material Systems and Structures, vol.15, No. 4, pp. 261–267, 2004.
12.
WeisshaarT.A., “Morphing Aircraft Technology – New Shapes for Aircraft Design,”Unclassified NATO Rept. RTO-MP-AVT-141, 2006.
13.
LoveM. H.ZinkP. S.StroudR. L.ByeD. R.RizkS.WhiteD., “Demonstration of morphing technology through ground and wind tunnel tests,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials, April 2007.
14.
IvancoT. G.ScottR. C.LoveM. H.ZinkS.WeisshaarT. A., “Validation of the Lockheed Martin morphing concept with wind tunnel testing,”. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 2007.
15.
GrantD.T.AbdulrahimM.LindR., “Flight Dynamics of a Morphing Aircraft Utilizing Independent Multiple-Joint Wing Sweep,”International Journal of Micro Air Vehicles, Vol. 2, No 2, 2010.
16.
AbdulrahimM.LindR., “Flight Testing and Response Characteristics of a Variable Gull-Wing Morphing Aircraft,”AIAA Guidance, Navigation, and Control Conference and Exhibit, August 2004.
17.
NamgoongH.CrossleyW. A.LyrintzisA. S., “Aerodynamic Optimization of a Morphing Airfoil Using Energy as an Objective,”AIAA JournalVol. 45, No. 9, pp. 2113–2124, 2007.
18.
ObradovicB.SubbaraoK., “Modeling of Flight Dynamics of Morphing-Wing Aircraft,”Journal of AircraftVol. 48, No. 2, pp. 391–402, 2011.
19.
WangI.GibbsS.C.DowellE. H., “Aeroelastic Model of Multisegmented Folding Wings: Theory and Experiment,”Journal of Aircraft, Vol. 42, No. 2, pp. 911–921, 2012.
20.
WangQ.ChenY.TangH., “Mechanism Design for Aircraft Morphing Wing,”53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, April 2012.
21.
De BreukerR.AbdallaM.GürdalZ.LindnerD., “Energy-Based Aeroelastic Analysis of a Morphing Wing,”Proc. SPIE 6523, Modeling, Signal Processing, and Control for Smart Structures, April 2007.
22.
WickenheiserA. M.GarciaE., “Aerodynamic Modeling of Morphing Wings Using an Extended Lifting-Line Analysis,”Journal of Aircraft, Vol. 44, No. 1, pp. 10–16, 2007.
23.
NikschA.ValasekJ.StrganacT.W.CarlsonL. A., “Morphing Aircraft Dynamical Model: Longitudinal Shape Changes,”AIAA Atmospheric Flight Mechanics Conference and Exhibit, August 2008.
24.
JohnstonC.O.NealD.A.WigginsL.D.RobertshawH.H.MasonW.H.InmanD.J., “A Model to Compare the Flight Control Energy Requirements of Morphing and Conventionally Actuated Wings,” Proceedings of 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, April 2003.
25.
YueT.WangL.AiJ., “Multibody Dynamic Modeling and Simulation of a Tailless Folding Wing Morphing Aircraft,”AIAA Atmospheric Flight Mechanics Conference, August 2009.
26.
BelotserkovskiiS. M., “Study of the Unsteady Aerodynamics of Lifting Surfaces Using the Computer,”Annual Review of Fluid Mechanics, Vol. 9, pp. 469–494, 1977.
27.
AttaE. H.KandilO. A.MookD. T.NayfehA. H., “Unsteady Aerodynamic Loads on Arbitrary Wings Including Wing-Tip and Leading-Edge Separation,”AIAA Paper 1977–0156, 1977.
28.
KonstandinopoulosP.ThrasherD. F.MookD. T.NayfehA. H.WatsonL., “A Vortex-Lattice Method for General Unsteady Aerodynamics,”Journal of Aircraft, Vol. 22, No. 1, pp. 43–49, 1985.
29.
KatzJ.PlotkinA., Low-Speed Aerodynamics, 2nd ed., Cambridge Univ. Press, New York, pp. 421–495, 2001.
30.
JungY.Y.KimJ.H., “Unsteady Subsonic Aerodynamic Characteristics of Wing in Fold Motion,”International Journal of Aeronautical and Space Science, Vol. 12, No. 1, pp 63–68, 2011.
31.
WangZ. G.ZhangZ. N., “Modeling and Simulation of Unsteady Aerodynamics on a Morphing Wing,”Applied Mechanics and Materials, Vol. 427–429, pp. 77–80, 2013.
32.
TennekesH., The Simple Science of Flight: From Insects to Jumbo Jets (Cambridge, Massachusetts: MIT Press), 2009.
ShusterM. D., “A survey of attitude representations,”The Journal of the Astronautical Sciences, Vol 41, No. 4, pp. 439–517, 1993.
35.
BaruhH., Analytical Dynamics. McGraw Hill, 1999.
36.
PreidikmanS., “Numerical Simulations of Interactions Among Aerodynamics, Structural Dynamics, and Control Systems,”Ph.D. Dissertation, Dept. of Engineering Science and Mechanics, Virginia Polytechnic Inst. and State Univ., Blacksburg, VA, 1998.
37.
KonstandinopoulosP.MookD. T.NayfehA. H., “A numerical method for general, unsteady aerodynamics,” in: American Institute of Aeronautics and Astronautics: Athmospheric Flight Mechanics Conference, 1981.
38.
NeefM.HummelD., “Euler Solution for a Finite-Span Flapping Wing,” Fixed and Flapping Wing Aerodynamics for Micro Air Vehicle Applications, edited by MullerT. J., Progress in Astronautics and Aeronautics, AIAA, Reston, VA, 2001, Vol. 195, pp. 429–449, Chap. 19.
