Blast Resistance Assessment of Concrete Wall Panels: Experimental and Numerical Investigations

Abstract

The cladding system of a building is crucial for protecting people and equipment against external explosions. Both experimental and numerical investigations are carried out in order to evaluate the resistance of precast concrete cladding wall panels against man-made attacks. The cladding system under investigation is a precast concrete wall panel for using in police station facilities that particularly need to be protected against man-made or subversive attacks. A total of three precast concrete cladding wall panels are studied. The panels are 3500 mm long and 1500 mm wide; and one is 150 mm thick while the other two are 200 mm thick. The longitudinal reinforcement consists of a single layer of reinforcement bars located in the middle of the cross section. The blast demand is due to the detonation of 3.5 and 5.5 kg of TNTeq, and the numerical simulations are carried out using the finite element software LS-Dyna©. Details of the experimental and numerical investigations are shown, and a discussion on the obtained results is provided.

Keywords

protective structures RC wall panels blast experimental test finite element simulations back analysis

References

Olmati

Trasborg

Naito

C.J.

Bontempi

, Blast resistance of reinforced precast concrete walls under uncertainty, International Journal of Critical Infrastructures, 2014, ISSN online: 1741–8038.

Olmati

Petrini

Gkoumas

, Fragility analysis for the Performance-Based Design of cladding wall panels subjected to blast load. Engineering Structures 2014; DOI: 10.1016/j.engstruct.2014.06.004

Moradi

L.G.

Dinan

R.J.

Bewick

B.T.

Davidson

J.S.

, Resistance of concrete masonry walls with membrane catcher systems subjected to blast loading, International Journal of Protective Structures, 2011, 2(1), 83–102.

Naito

C.J.

Dinan

Bewick

, Use of precast concrete walls for blast protection of steel stud construction, Journal of Performance of Constructed Facilities, 2011, 25, 454–463.

Naito

C.J.

Hoemann

Beacraft

Bewick

, Performance and characterization of shear ties for use in insulated precast concrete sandwich wall panels, Journal of Structural Engineering, 2012, 138, 1–11.

Schenker

Anteby

Gal

Kivity

Nizri

Sadot

Michaelis

Levintant

Ben-Dor

, Full-scale field tests of concrete slabs subjected to blast loads, International Journal of Impact Engineering, 2008, 35, 184–198.

Oehlers

D.J.

Rebentrost

Leach

Whittaker

A.S.

, Blast testing of ultra-high performance fibre and FRP-retrofitted concrete slabs, Engineering Structures, 2009, 31, 2060–2069.

Jones

Oehlers

D.J.

Sun

Marks

Coppola

, Finite difference analysis of simply supported RC slabs for blast loadings, Engineering Structures, 2009, 31, 2825–2832.

Zineddin

Krauthammer

Dynamic response and behavior of reinforced concrete slabs under impact loading, International Journal of Impact Engineering, 2007, 34, 1517–1534.

10.

Lawrence Software Technology Corporation (LSTC), LS-DYNA keyword user's manual, United States of America, California, 2013.

11.

Department of Defense (DoD), Structures to resist the effects of accidental explosions, United States of America, 2008.

12.

Consiglio Superiore dei Lavori Pubblici, Ministro delle Infrastrutture, Norme Tecniche per le Costruzioni (NTC 08), Rome, Italy, 2008.

13.

Garavaglia

Pizzigoni

Sgambi

Basso

, Collapse behaviour in reciprocal frame structures, Structural Engineering and Mechanics, 2013, 46(4), 533–547.

14.

Olmati

Petrini

Bontempi

, Numerical analyses for the structural assessment of steel buildings under explosions, Structural Engineering and Mechanics, 2013, 45(6), 803–819.

15.

Bontempi

Faravelli

, Lagrangian/Eulerian description of dynamic system, Journal of Engineering Mechanics, 1998, 124(8), 901–911.

16.

Manenti

Sibilla

Gallati

Agate

Guandalini

, SPH Simulation of Sediment Flushing Induced by a Rapid Water Flow, Journal of Hydraulic Engineering, 2012, 138(3), 272–284.

17.

National Cooperative Highway Research Program (NCHRP), Blast-resistant highway bridges: Design and detailing guidelines, United States of America, Washington DC, 2009.

18.

Petrini

Manenti

Gkoumas

Bontempi

, Structural design and analysis of offshore wind turbines from a system point of view, Wind Engineering, 2010, 34(1), 85–108.

19.

Petrini

Bontempi

, Basis of design and numerical modeling of offshore wind turbines, Structural Engineering and Mechanics, 2010, 36(5), 599–624.

20.

Sgambi

Gkoumas

Bontempi

, Genetic Algorithms for the Dependability Assurance in the Design of a Long- Span Suspension Bridge, Computer-Aided Civil and Infrastructure Engineering, 2012, 27(9), 655–675.

21.

Gentili

Giuliani

Bontempi

, Structural response of steel high rise buildings to fire: System characteristics and failure mechanisms, Journal of Structural Fire Engineering, 2013, 4(1), 9–26.

22.

Olmati

Gkoumas

Brando

Cao

, Consequence-based robustness assessment of a steel truss bridge, Steel and Composite Structures, 2013, 14(4): 379–395.

23.

Davidson

J.S.

Fisher

J.W.

Hammons

M.I.

Porter

J.R.

Dinan

R.J.

, Failure mechanisms of polymer-reinforced concrete masonry walls subjected to blast, Journal of Structural Engineering, 2005, 131(8), 1194–1205.

24.

Cowper

G.R.

Symonds

P.S.

, Strain hardening and strain rate effects in the impact loading of cantilever beams, Applied Mathematics Report No. 28, Brown University, Providence, Rhode Island, USA, 1957.

25.

Wang

Zhang

Wang

Tang

, Experimental study and numerical simulation of the damage of a square reinforced concrete slab under close-in explosion, Engineering Failure Analysis, 2013, 27, 41–51.

26.

, A comparative study of modelling RC slab response to blast loading with two typical concrete material models. International Journal of Protective Structures 2013, 4(3), 415–432.

27.

Hao

Z.X.

, Numerical analysis of lateral inertial confinement effects on impact test of concrete compressive material properties, International Journal of Protective Structures, 2010, 1(1), 145–168.

28.

Hao

, Numerical evaluation of the influence of aggregates on concrete compressive strength at high strain rate, International Journal of Protective Structures, 2011, 2(2), 177–206.

29.

United States Army Corps of Engineers (USACE), Methodology Manual for the Single-Degree-of-Freedom Blast Effects Design Spreadsheets, United States of America, 2008.

30.

Murray

Y.D.

, User's Manual for LS-DYNA Concrete Material Model 159, United States of America, Department of Transportation, Federal Highway Administration, 2007.

31.

Carta

Stochino

, Theoretical models to predict the flexural failure of reinforced concrete beams under blast loads, Engineering Structures, 2013, 49, 306–315.

32.

Newberry

C.M.

Hoemann

J.M.

Bewick

B.T.

Davidson

J.S.

, Response prediction of foam-insulated concrete sandwich panels subjected to blast loads using bilinear weighted-resistance SDOF models, International Journal of Protective Structures, 2012, 3(4), 389–406.

33.

Naito

C.J.

Wheaton

K.P.

, Blast Assessment of Load-Bearing Reinforced Concrete Shear Walls, Practice Periodical on Structural Design and Construction, 2006, 11(2), 112–121.

34.

Beppu

Ohno

Ohkubo

Satoh

, Contact explosion resistance of concrete plates externally strengthened with FRP laminates, International Journal of Protective Structures, 2010, 1(2), 257–270.

35.

Beppu

Miwa

Itoh

Katayama

Morita

Suzuki

, Design concept for local damage of concrete plates subjected to high velocity impact, International Journal of Protective Structures, 2012, 3(2), 161–176.