Abstract
An asynchronous pulsed-laser-excited Fourier transform Raman spectrophotometer based on a conventional continuous-scan interferometer has been developed. The additional assembly required for pulsed-laser-excited measurements, which consists of a pulsed Nd:YAG laser, a gate circuit, and a low-pass filter, can be attached to any conventional FT-Raman spectrophotometer. The principle of the signal-processing of this method is almost the same as that of the asynchronous time-resolved Fourier transform infrared spectroscopy reported previously. This method does not require the synchronization between the Raman excitation and the sampling of the A/D converter. As an application of this method, it is demonstrated that the use of a pulsed laser and a gate circuit can give a significant increase in signal-to-noise ratios over continuous-wave measurements with the same average laser power. It is also shown that when a constant background (for example, thermal radiation from samples at high temperatures) or a long-lived background is present, the use of pulsed excitation and a gate circuit can effectively reduce the background. Moreover, pulsed excitation can be used for recording time-resolved Raman spectra by using an FT-Raman spectrophotometer. The time resolution is governed only by the width of the probe laser pulse. The potentiality of this method is demonstrated.
Get full access to this article
View all access options for this article.