Emission from Nd:YAG laser-produced plasmas generated in air at atmospheric pressure has been studied with spatial resolution. With the use of a charge-coupled device (CCD), two-dimensional spatial distributions of the time-integrated line emission from plasmas of metallic (copper and stainless steel) and ceramic (alumina) samples were measured for laser power densities in the range 80–900 GW/cm2. Geometrical parameters (distance of the maximum, width in two directions) and the total space- and time-integrated emission were obtained as a function of power density. At the range 100–700 GW/cm2, the formation of a plasma in air for the metallic samples was shown to be responsible for a decrease in the total intensity of lines emitted from the sample plasma, accompanied by effects in the spatial profiles along the laser direction. Beyond 700 GW/cm2, a sharp increase of the line intensities was observed, related to the absence of the shielding air plasma.
AdrainR. S.WatsonJ., J. Phys. D: Appl. Phys.17, 1915 (1984).
2.
RadziemskiL. J.CremersD. A., “Spectrochemical Analysis Using Laser Plasma Excitation”, in Laser-Induced Plasmas and Applications, RadziemskiL. J.CremersD. A., Eds. (Marcel Dekker, New York, 1989), Chap. 7.
3.
PiepmeierE. H., “Laser Ablation for Atomic Spectroscopy”, in Analytical Applications of Lasers, PiepmeierE. H., Ed. (John Wiley and Sons, New York, 1986), Chap. 19.
4.
GeoheganD. B., “Effects of Ambient Background Gases on YBCO Plume Propagation under Film Growth Conditions: Spectroscopic, Ion Probe, and Fast Photographic Studies”, in Laser Ablation of Electronic Materials, FogarassyE.LazareS., Eds. (North-Holland, Amsterdam, 1992), p. 73.
UebbingJ.CiocanA.HiddemannL.NiemaxK., “Element Analysis of Solid Samples by Laser Ablation and Optical Spectroscopy”, in Laser Ablation: Mechanisms and Applications–II, MillerJ. C.GeoheganD. B., Eds. (AIP Press, New York, 1993), p. 109.
MaoX. L.ShannonM. A.FernandezA. J.RussoR. E., Appl. Spectrosc.49, 1054 (1995).
33.
GeoheganD. B., Appl. Phys. Lett.60, 2732 (1992).
34.
PietschW.BriendA.MauchienP.PetitA., “Experimental Study of Laser-Produced Plasma at Reduced Pressure for Elemental and Isotopic Analytical Control”, in Laser Ablation: Mechanisms and Applications–II, MillerJ. C.GeoeghanD. B., Eds. (AIP Press, New York, 1993), p. 131.
FernandezA.MaoX. L.ChanW. T.ShannonM. A.RussoR. E., Anal. Chem.67, 2444 (1995).
41.
RussoR. E.MaoX. L.CaetanoM.ShannonM. A., App. Surf. Sci.96–98, 144 (1996).
42.
Von AllrnenM.BlatterA., Laser-Beam Interactions with Materials: Physical Principles and Applications (Springer-Verlag, Berlin, 1995).
43.
Boulmer-LeborgneC.HermannJ.DubreuilB., “Creation Mechanism of a Laser-Plasma in front of a Solid in an Ambient Gas”, in Laser Ablation of Electronic Materials, FogarassyE.LazareS., Eds. (North-Holland, Amsterdam, 1992).
