Practical Operation of a Biaxial Goniometer at the Wrist Joint

Abstract

The objectives of this study were (a) to determine errors in wrist angle measurements from a commercially available biaxial electrogoniometer and (b) to develop a calibration routine in order to correct for these errors. Goniometric measurements were collected simultaneously with true angular data using a fixture that allowed wrist movement in one plane while restricting motion in the orthogonal plane. These data were collected in two sets of trials: flexion/extension with radial/ulnar deviation restricted, and radial/ulnar deviation with flexion/extension restricted. During these trials, we studied discrete 30° increments of forearm rotation. The results showed the expected cross talk and zero drift errors during forearm rotation. The application of mathematical equations that describe the effect of goniometer twist resulted in significant error reduction for most forearm rotations. The calibration technique employs both a slope and a displacement transformation to improve the accuracy of angular data. The calibration technique may be used on data collected in the field if forearm rotation is measured simultaneously with the goniometer data.

Get full access to this article

View all access options for this article.

References

Armstrong, T. (1986) Ergonomics and cumulative trauma disorders. Hand Clinics, 2, 553–565.

Armstrong, T. , Dunnigan, J. , Ulin, S. , & Foulke, J. A. (1993 September 26–0ctober 1). Evaluation of a biaxial flexible wire electrogoniometer for measurement of wrist posture. Paper presented at the 24th Congress of the International Commission on Occupational Health, Nice, France.

Armstrong, T. J. , Foulke, J. A. , Joseph, B. S. , & Goldstein, S. A. (1982) Investigation of cumulative trauma disorders in a poultry processing plant. American Industrial Hygiene Association Journal, 43, 103–116.

Ball, P. , & Johnson, G. R. (1993) Reliability of hindfoot goniometry when using a flexible electrogoniometer. Clinical Biomechanics, 8, 13–19.

Boocock, M. G. , Jackson, J. A. , Burton, A. K. , & Tillotson, K. M. (1994) Continuous measurement of lumbar posture using flexible electrogoniometers. Ergonomics, 37, 173–185.

Casolo, F. , & Legnani, G. (1990 August.). Choice and measurement of angular variables for biomechanic 3D analysis and simulation, discussion of results collected by a commercial system. Paper presented at the First World Congress of Biomechanics, San Diego, CA.

Garrett, J. W. (1970a). Anthropometry of the hand of female air force flight personnel (Report AMRL-TR-69–26). Wright-Patterson Air Force Base, OH: Air Force Systems Command, Aerospace Medical Division, Aerospace Medical Research Laboratory.

Garrett, J. W. (1970b). Anthropometry of the hand of male air force flight personnel (Report AMRL-TR-69–42). Wright-Patterson Air Force Base, OH: Air Force Systems Command, Aerospace Medical Division, Aerospace Medical Research Laboratory.

Marras, W. , & Schoenmarklin, R. W. (1993) Wrist motions in industry. Ergonomics, 36, 341–351.

10.

Moore, A. , Wells, R. , & Ranney, D. (1991) Quantifying exposure in occupational manual tasks with cumulative trauma disorder potential. Ergonomics, 34, 1433–1453.

11.

Nicol, A. C. (1987). A flexible electrogoniometer with widespread applications. In B. Jonsson (Ed.), International series on biomechanics: Biomechanics X (Vol. B, pp. 1029–1033). Champaign, IL: Human Kinetics.

12.

Ojima, H. , Miyake, S. , Kumashiro, M. , Togami, H. , & Suzuki, K. (1991) Dynamic analysis of wrist circumduction: A new application of the biaxial flexible electro goniometer. Clinical Biomechanics, 6, 221–229.

13.

Putz-Anderson, V. (Ed.). (1988). Cumulative trauma disorders: A manual for musculoskeletal diseases of the upper limb. London: Taylor & Francis.

14.

Rowe, P. J. , Nicol, A. C. , & Kelly, I. G. (1989) Flexible goniometer computer system for the assessment of hip function. Clinical Biomechanics, 4, 68–72.

15.

Smutz, P. , Serina, E. , & Rempel, D. (1994) A system for evaluating the effect of keyboard design on force, posture, comfort and productivity. Ergonomics, 37, 1649–1660.

16.

Wells, R. , Moore, A. , Potvin, J. , & Norman, R. (1994) Assessment of risk factors for development of work-related musculoskeletal disorders (RSI). Applied Ergonomics, 25, 157–164.