A reference shape library for computer aided socket design in above-knee prostheses

Abstract

A Reference Library of socket shapes for an Above-Knee Computer Aided Socket Design (CASD) System has been created. This library forms part of a more general CASD System (Dean & Saunders, 1985; Novicov & Foort, 1982). It consists of a matrix of reference shapes representing above-knee socket characteristics and is based upon skeletal structure, residuum length and tissue mass. A set of 27 biomechanical reference shapes in the form of male plaster casts were produced by a combination of CNC milling and traditional artisan techniques. Each reference shape was digitized to obtain its cylindrical coordinates. Cross-sectional areas and tissue distributions within each shape and between the shapes were analyzed, modified and then stored numerically within the computer for further implementation of the CASD System for the above-knee amputees. The creation and the analysis of the reference shape data is described.

References

Barclay

. Below-knee amputation prostheses. Prosthetic and orthotic practice, Murdoch . E. Arnold, London 1970; 69–78

Dean

Saunders

C. G

. A software package for design and manufacture of prosthetic sockets for transtibial amputees. IEEE Trans. Biomed Eng 1985; BME-32: 257–262

Dewar

Jarman

Reynolds

Crawford

Maccoughlan

Wilkinson

Crew

. Computer aided socket design (CASD): U.C.L. System based on full shape sensing. University College London, Bioengineering Centre. 1985; 19–30, Annual Report

Foort

. Adjustable-brim fitting of the total-contact above-knee socket. University of California, Biomechanics Laboratory, California 1963

Foort

. Similarities of thigh stumps related to socket design. Manitoba Rehabilitation Hospital, WinnipegCanada 1965, Report No. 5

Foort

. Strathclyde papers. National Centre for Training and Education in Prosthetics and Orthotics. University of Strathclyde, GlasgowScotland 1984

Krouskop

T. A.

Muilenberg

A. L.

Doughtery

D. R.

Winninoham

D. J

. Computer-aided design of a prosthetic socket for an above-knee amputee. J. Rehabil. Res. Dev. 1987; 24(2)31–38

Oberg

K. E.T

. Swedish attempts in using CAD/CAM principles for prosthetics and orthotics. Clin. Prosthet. Orthot. 1985; 9: 19–23

Lanczos

. Applied analysis. Prentice-Hall, New York 1964

10.

Novicov

Foort

. Computer aided socket design for amputees. Conference on Biosteriometrics-82, Appendix 5. 1982. University of British Columbia, Canada, 1–4

11.

Saunders

C. G

. Shape copier documentation. Medical Engineering Resource Unit, VancouverCanada 1986, Internal Report

12.

Schutz

R. W.

Roy

E. A

. Absolute error: the devil in disguise. J. Motor Behaviour 1973; 5(3)141–153

13.

Torres-Moreno

. Three dimensional shape definition of above-knee amputee sockets for computer aided manufacture. M.Sc. Thesis, Simon Fraser University, BurnabyCanada 1987