Axle Load Distribution Characterization for Mechanistic Pavement Design

Abstract

Proper consideration of traffic loading in pavement design requires knowledge of the full axle load distribution by the main axle types, including single, tandem, and tridem axles. Although the equivalent single axle load (ESAL) concept has been used since the 1960s for empirical pavement design, the new mechanistic-based pavement design procedures under development by various agencies most likely will require the use of the axle load distribution. Procedures and models for converting average daily traffic into ESALs and axle load distribution are presented, as are the relevant issues on the characterization of the full axle load distributions for single, tandem, and tridem axles for use in mechanistic-based pavement design. Weigh-in-motion data from the North Central Region of the Long-Term Pavement Performance study database were used to develop the models for predicting axle load distribution.

Get full access to this article

View all access options for this article.

References

Guide for Design of Pavement Structures. AASHTO, Washington, D.C., 1993.

Mix Design Methods for Asphalt Concrete and Other Hot Mixtures. Manual Series 2. Asphalt Institute, College Park, Md., 1979.

Design and Construction of Joints for Concrete Highways. Concrete Paving Technology, Portland Cement Association, 1991.

Owusu-Antwi

E. B.

, Titus-Glover

, Khazanovich

, and Roeseler

J. R.

. Development and Calibration of Mechanistic-Empirical Distress Models for Cost Allocation. Final Report. FHWA, U.S. Department of Transportation, 1997.

Ott

W. C.

, and Papagianalis

A. T.

. Weigh-in-Motion Data Quality Assurance Based on 3-S2 Steering Axle Load Analysis. In Transportation Research Record 1536, TRB, National Research Council, Washington, D.C., 1996, pp. 12–18.