Finite-Element Modeling of Guardrail Timber Posts and the Post-Soil Interaction

Abstract

The performance of many guardrail terminal systems is dependent on the strength of timber guardrail posts and soil conditions. Accurately simulating the breakaway characteristits of guardrail posts mounted in soils is an important issue concerning researchers in the roadside safety community. Finite-element analysis is one method that can be used to evaluate roadside hardware designs, but good simulations are contingent on developing accurate models of the components. A description is provided of the development of a model of a breakaway timber post and soil system used in the breakaway cable terminal (BCT) and the modified eccentric loader terminal (MELT). The model is described and simulation results are compared with data from physical tests of BCT/MELT posts.

Get full access to this article

View all access options for this article.

References

Ray

M. H.

, and Patzner

G. S.

. Finite-Element Model of Modified Eccentric Loader Terminal (MELT). In Transportation Research Record 1599, TRB, National Research Council, Washington D.C., 1997, pp. 11–21.

Rohde

J. R.

, Rosson

B. T.

, and Smith

. Instrumentation for Determination of Guardrail-Soil Interaction. In Transportation Research Record 1528, TRB, National Research Council, Washington D.C., 1996.

Stout

, Hinch

, and Yang

T. L.

. Force Deflection Characteristics of Guardrail Posts. Report FHWA-88-193. FHWA, U.S. Department of Transportation, Sept. 1988.

Dewey

J. F.

, Jeyapalan

J. K.

, Hirsch

T. J.

, and Ross

H. E.

. A Study of the Soil-Structure Interaction Behavior of Highway Guardrail Posts. Report FHWA/TX-84/12+343-1. Texas Transportation Institute, Texas A&M University, College Station, July. 1983.

Patzner

G. S.

, Plaxico

C. A.

, and Ray

M. H.

. Effects of Wood Post and Soil Strength on the Performance of the Modified Eccentric Loader Breakaway Cable Terminal (MELT) in an NCHRP Report 350, Test 3-35 Impact Scenario. Unpublished draft. University of Iowa, Iowa City, 1997.

U.S. Department of Agriculture. Wood Handbook: Wood as an Engineering Material. U.S. Government Printing Office, Washington, D.C., 1987.

Brown

C. M.

Pendulum Testing of BCT Wood Posts: FOIL Tests 91P039 Through 91P045. Federal Outdoor Impact Laboratory, McLean, Va., Aug. 1991.

Hallquist

J. O.

LS-DYNA3D Theoretical Manual. LSTC Report 1018, Revision 3. Livermore Software Technology Corporation, Livermore, Calif., April 1994.

Hallquist

J. O.

, Stillman

D. W.

, and Lin

T. L.

. LS-DYNA3D Users Manual, Version 930: A Nonlinear, Explicit, Three-Dimensional Finite Element Code for Solid and Structural Mechanics. Livermore Software Technology Corporation, Livermore, Calif, April 1994.

10.

Cook

R. D.

Finite Element Modeling for Stress Analysis. John Wiley & Sons, New York, 1995.

11.

Habibagahi

, and Langer

J. A.

. Horizontal Subgrade Modulus of Granular Soils. In Laterally Loaded Deep Foundations ( Langer

J. A.

, Mosely

E. T.

, and Thompson

C. D.

, eds.)., ASTM 04-835000-38, American Society for Testing Materials, 1984, pp. 21–34.

12.

Michie

J. D.

, Ray

M. H.

, Hunter

W. W.

, and Stutts

. Evaluation of Design Analysis Procedures and Acceptance Criteria for Roadside Hardware. Southwest Research Institute, San Antonio, Tex., Oct. 1985.

13.

Holloway

J. C.

, Bierman

M. G.

, Pfeifer

B. G.

, Rossen

B. T.

, and Sicking

D. L.

. Performance Evaluation of KDOT W-Beam Systems Volume II: Component Testing and Computer Simulation. Report TRP-03-39-96. Midwest States Regional Pooled Fund, May 1996.

14.

Bowles

J. E.

Foundation Analysis and Design, 4th ed. McGraw-Hill, New York, 1988.

15.

Dunn

I. S.

, Anderson

L. R.

, and Kiefer

F. W.

. Fundamentals of Geotechnical Analysis. John Wiley & Sons, New York, 1980.

16.

Holtz

R. D.

An Introduction to Geotechnical Engineering. Prentice-Hall, Englewood Cliffs, N.J., 1981.

17.

Sogge

R. L.

Microcomputer Analysis of Laterally Loaded Piles. In Lat-erally Loaded Deep Foundations: Analysis and Performance. ( Langer

J. A.

, Mosely

E. T.

, and Thompson

C. D.

, eds.), ASTM STP 835, American Society for Testing and Materials, 1984, pp. 35–48.