Proposed Revisions to AASHTO Standard Specifications for Structural Supports for Highway Signs,Luminaires,and Traffic Signals

Abstract

The 1985 AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals (referred to here as the current Supports Specifications) has been revised in its entirety with significant additions to its content and scope. This work is the result of an extensive research study performed under NCHRP project 17-10. The main objective of the study was to update the previous edition of the Supports Specifications based on the most recent state-of-the-art information for the design and use of structural supports. Considerable effort was made to specify the best practice, realizing the characteristics and limitations of each material. From a design safety standpoint, all materials for structural supports were treated equitably. Safety, aesthetics, and economy were three main guidelines in developing the provisions of the Supports Specifications, but manufacturing practices and experiences were also considered. The proposed specification is presented in a specification/commentary side-by-side format that will enable the engineer to review with ease the basis of Supports Specifications’ provisions. References are updated to provide a resource for the most recent research studies related to the structural behavior and performance of structural supports. An extensive table of contents is provided to allow easy reference and quick access to various provisions of the Supports Specifications. The purpose of this report is to present highlights of the proposed revisions to the specification. The supporting information, scope, and basis for the proposed changes are also discussed.

Get full access to this article

View all access options for this article.

References

Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals. AASHTO, Washington, D.C., 1994.

Ross

H. E.

, Sicking

D. L.

, Zimmer

R. A.

, and Mitchie

J. D.

. Recommended Procedures for the Safety Performance Evaluation of Highway Features. Report 350, TRB, National Research Council, Washington, D.C., 1993.

AASHTO LRFD Bridge Design Specifications, 1st ed. AASHTO, Washington, D.C., 1994.

Manual of Steel Construction—Allowable Stress Design, 9th ed. AISC, Chicago, Ill., 1989.

Aluminum Design Manual. The Aluminum Association, Washington, D.C., 1994.

Standard Minimum Design Loads for Buildings and Other Structures. ANSI/ASCE 7-95. American Society of Civil Engineers, New York, 1995.

Kaczinski

M. R.

, Dexter

R. J.

, and Van Dien

J. P.

. Fatigue-Resistant Design of Cantilevered Signal, Sign and Light Supports. NCHRP Draft Final Report for Project 10-38, ATLSS Engineering Research Center, Lehigh University, Bethlehem, Penn., 1996.

Task Committee on Wind Forces of the Committee on Loads and Stresses, of the Structural Division, Transactions. Wind Forces on Structures. ASCE, Part II, Vol. 126, 1961.

Building Code Requirements for Minimum Design Loads in Buildings and Other Structures. ANSI A58.1-1972, American National Standards Institute, New York, New York, 1972.

10.

Standard Specifications for Highway Bridges. AASHTO, Washington, D.C., 1996.

11.

Cannon

D. D.

, and LeMaster

R. A.

. Local Buckling Strength of Polygonal Tubular Poles. Transmission Line Mechanical Research Center, Electric Power Research Institute, Haslet, Tex., 1987.

12.

Design of Steel Transmission Pole Structures, 2nd ed. Manuals and Reports on Engineering Practice No. 72, ASCE, 1990.

13.

Fouad

F. H.

, Calvert

E. A.

, and Nunez

. Structural Supports for Highways Signs, Luminaires and Traffic Signals. Final Report, NCHRP Project 17-10. TRB, National Research Council, Washington, D.C., 1997.

14.

Specifications for Aluminum Structures. Publication 30, The Aluminum Association, Washington, D.C., 1982.

15.

ASCE/PCI Joint Committee on Concrete Poles. Guide for the Design of Prestressed Concrete Poles. Journal of the Precast/Prestressed Concrete Institute, Vol. 42, No. 6, Nov.–Dec. 1997, pp. 94–134.

16.

National Design Specifications for Wood Construction, Revised 1991 ed. ANSI/NFoPA NDS-1991, American Forest and Paper Association, Washington, D.C., 1993.

17.

AWPA Book of Standards 1996. American Wood-Preservers Association, Stevensville, Md., 1996.

18.

Structural Plastics Design Manual. ASCE Manuals and Reports on Engineering Practice, No. 63, ASCE, 1984.

19.

Johnson

A. F.

Design of RP Cylinders under Buckling Loads. 40th Annual Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., Jan. 28-Feb. 1, 1985.

20.

Standard Specification for Reinforced Thermosetting Plastic Poles. In Annual Book of ASTM Standards. ASTM D4923-92, American Society for Testing and Materials, Philadelphia, 1995.

21.

Lee

D. W.

, and Breen

J. E.

. Factors Affecting Anchor Bolt Development. Research Report Number 88-1F. Center for Highway Research, Texas Highway Department, Austin, Tex., 1966.

22.

Jirsa

J. O.

, Cichy

N. T.

, Calzadilla

M. R.

, Smart

W. H.

, Pavluvcik

M. P.

, and Breen

J. E.

. Strength and Behavior of Bolt Installations Anchored in Concrete Piers. Report No. FHWA/TX-85/51+305-1F. Texas State Department of Highways and Public Transportation, Austin, Tex., 1984.

23.

Appendix B, Steel Embedments. In Code Requirements for Nuclear Safety Related Concrete Structures. ACI 349-90, American Concrete Institute, Detroit, 1995.

24.

Cook

R. A.

, Doerr

G. T.

, and Klingner

R. E.

. Design Guide for Steel-to-Concrete Connections. Report FHWA/TX-89+1126-4F. Center for Transportation Research, Texas State Department of Highways and Public Transportation, Austin, Tex., March 1989.

25.

Broms

B. B.

Lateral Resistance of Piles in Cohesionless Soils. Journal of the Soil Mechanics and Foundations Division, ASCE, Proc. 3909, Vol. 90, SM3, May 1964, pp. 123–156.

26.

Broms

B. B.

Lateral Resistance of Piles in Cohesive Soils. Journal of the Soil Mechanics and Foundations Division, ASCE, Proc. 3825, Vol. 90, SM2, March 1964, pp. 27–63.

27.

Broms

B. B.

Design of Laterally Loaded Piles. Journal of the Soil Mechanics and Foundations Division, Proc. 4342, ASCE, Vol. 91, No. SM3, May 1965, pp. 79–99.

28.

Fouad

F. H.

, Calvert

E. A.

, and Nunez

. Structural Supports for Highways Signs, Luminaires and Traffic Signals. NCHRP Report 411. TRB, National Research Council, Washington, D.C., 1998.