Railing Systems for Use on Timber Deck Bridges

Abstract

Bridge railing systems in the United States have historically been designed based on static load criteria given in the AASHTO Standard Specifications for Highway Bridges. In the past decade, full-scale vehicle crash testing has been recognized as a more appropriate and reliable method of evaluating bridge railing acceptability. In 1989, AASHTO published the Guide Specifications for Bridge Railings, which gave the recommendations and procedures to evaluate bridge rails by full-scale vehicle crash testing. In 1993, the National Cooperative Highway Research Program (NCHRP) published Report 350: Recommended Procedures for the Safety Performance Evaluation of Highway Features, which provided criteria for evaluating longitudinal barriers. Based on these specifications, a cooperative research program was initiated between the University of Nebraska-Lincoln and the Forest Products Laboratory, and later the FHWA, to develop and crash test 11 bridge rails for wood deck bridges. The research that resulted in successful development and testing of 11 bridge railing systems for longitudinally and transversely laminated wood bridge decks in accordance with AASHTO Performance Level 1 and 2 (PL-1 and PL-2) requirements and Test Levels 1, 2, and 4 (TL-1, TL-2, and TL-4) requirements of NCHRP Report 350 are described here.

Get full access to this article

View all access options for this article.

References

Standard Specifications for Highway Bridges. AASHTO, Washington, D.C., 1989.

Full-Scale Testing Procedures for Guardrails and Guide Posts. Highway Research Circular No. 482. HRB, National Research Council, Washington, D.C., 1962.

Michie

J. D.

NCHRP Report 230: Recommended Procedures for the Safety Performance Evaluation of Highway Appurtenances. TRB, National Research Council, Washington, D.C., 1981.

Guide Specifications for Bridge Railings. AASHTO, Washington, D.C., 1989.

Ross

H. E.

Jr. , Sicking

D. L.

, Zimmer

R. A.

, and Michie

J. D.

. NCHRP Report 350: Recommended Procedures for the Safety Performance Evaluation of Highway Features. TRB, National Research Council, Washington, D.C., 1993.

AASHTO LRFD Bridge Design Specifications, 1st ed. AASHTO, Washington, D.C., 1994.

Hirsch

T. J.

Analytical Evaluation of Texas Bridge Rails to Contain Buses and Trucks. Report No. FHWA/TX78-230-2. Submitted to Texas State Department of Highways and Public Transportation, Texas Transportation Institute, Texas A&M University, August 1978.

Memorandum on Bridge Rails. File Designation HNG-10/HHS-10, August 28, 1986. FHWA, Washington, D.C., 1986.

Memorandum on Crash Tested Bridge Railings. File Designation HNG-14, August 13, 1990. FHWA, Washington, D.C., 1990.

10.

Hancock

K. L.

, Hansen

A. G.

, and Mayer

J. B.

. Aesthetic Bridge Rails, Transitions, and Terminals for Park Roads and Parkways. Report No. FHWA-RD-90-052. Submitted to the Office of Safety and Traffic Operations R&D, FHWA, performed by The Scientex Corp., May 1990.

11.

Raju

P. R.

, S GangaRao

H. V.

, Duwadi

S. R.

, and Thippeswamy

H. K.

. Development and Testing of Timber Bridge and Transition Rails for Transverse Glued-Laminated Bridge Decks. In Transportation Research Record 1460, TRB, National Research Council, Washington, D.C., 1994, pp. 8–18.

12.

Ritter

M. A.

Timber Bridges: Design, Construction, Inspection, and Maintenance. EM-7700-8. USDA Forest Service, Washington, D.C., 1990.

13.

Powell

G. H.

BARRIER VII: A Computer Program for Evaluation of Automobile Barrier Systems. Report FHWA RD-73-51. FHWA, U.S. Department of Transportation, April 1973.

14.

AWPA Book of Standards. American Wood Preservers Association, Woodstock, Md., 1992.

15.

Hinch

, Yang

T. L.

, and Owings

. Guidance Systems for Vehicle Testings. ENSCO Inc., Springfield, Va., 1986.

16.

Vehicle Damage Scale for Traffic Accident Investigators, 2nd ed. Technical Bulletin No. 1, Traffic Accident Data (TAD) Project, National Safety Council, Chicago, Ill., 1971.

17.

Collision Deformation Classification—Recommended Practice J224 March 1980. Handbook, Vol. 4, Society of Automotive Engineers, Warrendale, Penn., 1985.

18.

Faller

R. K.

, Ritter

M. A.

, Holloway

J. C.

, Pfeifer

B. G.

, Rosson

B. T.

. Performance Level 1 Bridge Railings for Timber Decks. In Transportation Research Record 1419, TRB, National Research Council, Washington, D.C., 1993, pp. 21–34.

19.

Fowler

M. D.

Design and Testing of a Test Level 4 Bridge Railing for Transverse Glulam Timber Deck Bridges. M.S. thesis. University of Nebraska-Lincoln, May 1997.

20.

Ritter

M. A.

, and Faller

R. K.

. Crashworthy Bridge Railings for Longitudinal Wood Decks. 1994 Pacific Timber Engineering Conference, Gold Coast, Australia, July 11-15, 1994.

21.

Rosson

B. T.

, Faller

R. K.

, and Ritter

M. A.

. Performance Level 2 and Test Level 4 Bridge Railings for Timber Decks. In Transportation Research Record 1500, TRB, National Research Council, Washington, D.C., 1995, pp. 102–111.

22.

Faller

R. K.

, Rosson

B. T.

, Ritter

M. A.

, and Sicking

D. L.

. Design and Evaluation of Two Low-Volume Bridge Railings. Sixth International Conference on Low-Volume Roads, Vol. 2, Conference Proceedings 6, University of Minnesota, Minneapolis, Minn., June 25-29, 1995, TRB, National Research Council, Washington, D.C., 1995.

23.

Ritter

M. A.

, Faller

R. K.

, and Duwadi

S. R.

. Crash-Tested Bridge Railings for Timber Bridges. Fourth International Bridge Engineering Conference, Vol. 2, Conference Proceedings 7, San Francisco, Calif., Aug. 28–30, 1995, TRB, National Research Council, Washington, D.C., 1995.

24.

Ritter

M. A.

, Lee

P. D. H.

, Faller

R. K.

, Rosson

B. T.

, and Duwadi

S. R.

. Plans for Crash Tested Bridge Railings for Longitudinal Wood Decks. General Technical Report No. FPL-GTR-87. United States Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, Wis., Sept. 1995.