Mechanism of Interaction of Asphalt Cement with Crumb Rubber Modifier

Abstract

The nature of the interaction process between asphalt cement and crumb rubber modifier (CRM) has not been fully understood. Two main types of mechanisms that affect the produced binder properties are reported: particle swelling and degradation (devulcanization and depolymerization). These mechanisms occur as the binder is subjected to different combinations of interaction time and temperature. Insight into the mechanisms by which the interaction between the two materials takes place through monitoring the changes in the rheological parameters of the binder is provided. The effects of the interaction process variables, time and temperature, are explained. The effect of CRM properties, including particle size and material source, is also discussed.

Get full access to this article

View all access options for this article.

References

Saylak

, Noel

, and Boggess

. The Duomorph—An In-Situ Viscoelastic Characterization Transducer. 6th International Conference on Experimental Stress Analysis, Munich, Germany, Sept. 1978.

Heitzman

State of the Practice—Design and Construction of Asphalt Paving Materials with Crumb Rubber Modifier. Report FHWA-SA-92-022. FHWA, U.S. Department of Transportation, May 1992.

Bahia

, and Davies

. Effect of Crumb Rubber Modifiers (CRM) on Performance-Related Properties of Asphalt Binders. Journal of the Association of Asphalt Paving Technologists, Vol. 63, 1994.

Green

, and Tolonen

. The Chemical and Physical Properties of Asphalt-Rubber Mixtures, Part I—Basic Material Behavior. Report FHWA-AZ-HPR14-162. Arizona Department of Transportation, March 1977.

Buckly

, and Berger

. The Swelling of Polymer System in Solvents. Journal of Polymer Science, Vol. 56, 1962.

Zanzotto

, and Kennepohl

G. J.

. Development of Rubber and Asphalt Binders by Depolymerization and Devulcanization of Scrap Tires in Asphalt. In Transportation Research Record 1530, TRB, National Research Council, Washington D.C., 1996, pp. 51–58.

Billiter

T. C.

, Davison

R. R.

, Glover

C. J.

, and Bullin

J. A.

. Production of Asphalt-Rubber Binders by High-Cure Conditions. In Transportation Research Record 1586, TRB, National Research Council, Washington D.C., 1997, pp. 50–56.

Western Research Institute. Fundamental Properties of Asphalts and Modified Asphalts. Semi-Annual Technical Report. FHWA, U.S. Department of Transportation, Oct. 1994.

Abdelrahman

M. A.

Engineering Characterization of the Interaction of Asphalt with Crumb Rubber Modifier (CRM). Ph.D. thesis. University of Illinois at Urbana-Champaign, May 1996.

10.

Abdelrahman

M. A.

, and Carpenter

S. H.

. Controlling Low Temperature Properties of Asphalt-Rubber Binders. Proc., 2nd Transportation Specialty Conference. Canadian Society for Civil Engineering, Halifax, Nova Scotia, Canada, June 1998.