Reusable High-Molecular-Weight,High-Density Polyethylene Crash Cushions for Wide Hazards

Abstract

The development and full-scale crash testing of a new, reusable, and essentially maintenance-free crash cushion designed to shield wide hazards are described. The energy-dissipating medium in this device is composed of high-molecular-weight, high-density polyethylene cylinders. This “smart” energy-dissipating thermoplastic is the same material used in the REACT family of narrow-hazard crash cushions and truck-mounted attenuators. It is self-restorative and reusable and possesses excellent energy-dissipation properties. The design process incorporated the results of impact testing with individual polyethylene cylinders, finite-element modeling, and a comprehensive full-scale crash testing program conducted in accordance with the guidelines of NCHRP Report 350. It is demonstrated that finite-element modeling is a cost-effective tool whose use can minimize the number of costly full-scale crash tests required to develop an effective impact attenuation device. This new, reusable, wide-hazard crash cushion satisfies all of the requirements of NCHRP Report 350 and has been accepted by FHWA for use in the National Highway System.

Get full access to this article

View all access options for this article.

References

Carney

J. F.

III. , Development of Maintenance-Free Highway Safety Appurtenances. Report WA-RD 308.1, Final Report. Washington State Department of Transportation, 1992.

Carney

J. F.

III , and Faramawi

. Reusable Impact Attenuation Devices. Proc., American Society of Mechanical Engineers IV Symposium on Crashworthiness and Occupant Protection in Transportation Systems, AMD, Vol. 210/BED, Vol. 30, 1995, pp. 161–177.

Ross

H. E.

, Sicking

D. L.

, Zimmer

R. A.

, and Michie

J. D.

. NCHRP Report 350: Recommended Procedures for the Safety Performance Evaluation of Highway Features. TRB, National Research Council, Washington, D.C., 1993.

Carney

J. F.

III , Faramawi

M. L.

, and Chatterjee

. Development of Reusable High-Molecular-Weight–High-Density Polyethylene Crash Cushions. In Transportation Research Record 1528, TRB, National Research Council, Washington, D.C., 1996, pp. 11–27.

Carney

J. F.

III , Chatterjee

, and Albin

R. B.

. Development of a 100-km/h Reusable High-Molecular Weight/High-Density Polyethylene Truck-Mounted Attenuator. In Transportation Research Record 1647, TRB, National Research Council, Washington, D.C., 1998, pp. 75–88.

Whirley

R. G.

, and Engelmann

B. E.

. DYNA3D—Users Manual. UCRLMA-107254 Rev. 1. Methods Development Group, Mechanical Engineering, Lawrence Livermore National Laboratory, 1993.