Bond Characteristics of Overlays Placed over Bridge Decks Sealed with High-Molecular-Weight Methacrylate

Abstract

The bond strength between portland cement overlays and bridge decks treated with high-molecular-weight methacrylate sealers is examined. The data universally suggest that sealers reduce the available bond strength. However, extra surface preparation techniques, such as light sandblasting of the sealed surface or broadcasting sand over the surface immediately after sealing [at approximately 1 kg/m² (20 lb/100 ft²)], restore the strengths to 80 or 85 percent, respectively, of the unsealed surface. Service-level fatigue testing and loading well beyond the serviceability limit state do not adversely affect the bond strength so long as the sealed surface is treated before the application of the overlay. Therefore, to seal the existing cracks, bridge decks may be sealed if either of the recommended secondary surface preparation techniques is followed.

Get full access to this article

View all access options for this article.

References

Concrete Highway Bridge Deck Construction (ACI 345R-91). In ACI Manual of Concrete Practice, American Concrete Institute, Detroit, Mich. (annual).

Pfiefer

D. W.

, Perenchio

W. F.

, and Marusin

. Cost Protective Protection of Rebars Against Chlorides, Sealers or Overlays? Concrete Construction, May 1984.

Gillum

A. J.

, Cole

, Turer

, and Shahrooz

B. M.

. Bond Characteristics of Portland Cement Overlays on Sealed Existing Bridge Decks. Report UC-CII 98/02. Cincinnati Infrastructure Institute, Cincinnati, Ohio, 1998.

Mechanical Behavior of High Performance Concretes, Volume 1, Summary Report. SHRP-C-361. Strategic Highway Research Program, National Research Council, Washington, D.C., 1993, pp. 93–98.