Use of Dynamic Cone Penetrometer to Control Compaction of Granular Fill

Abstract

Granular material is commonly used as backfill and embedment material for buried structures, including thermoplastic pipe. Proper compaction of this material is crucial to the successful performance of the pipe. However, the commonly used Proctor density approach cannot be used for the field compaction control of these materials because it does not provide a well-defined moisture-density relationship. An alternative method used by the authors for compaction control of such materials is described. This method involves a device known as the dynamic cone penetrometer (DCP). Findings are presented from a series of DCP tests conducted on a range of granular backfill materials that belong to ASTM D 2321 Classes I and II. These materials were compacted using (a) an impact rammer and (b) a vibratory plate compactor. The level of compaction energy was varied by changing the number of passes. The data obtained from these tests are presented in the form of DCP blow count profiles, which are then used as the basis for comparison between different materials, compaction equipment, and levels of compaction energy. A series of full-scale load tests conducted on high-density polyethylene (HDPE) pipe installations is also described. An overview is provided of how the DCP data may be combined with load-deflection data from full-scale load tests to establish guidelines for compaction control of pipe backfill.

Get full access to this article

View all access options for this article.

References

Amarasiri

A. L.

, Jayawickrama

P. W.

, and Senadheera

S. P.

. Use of Large Diameter HDPE Pipes in Highway Construction: Current State of Practice. Presented at the 78th Annual Meeting of the Transportation Research Board, Washington, D.C., 1999.

M145–91: The Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes. In Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Part I Specifications. American Association of State Highway and Transportation Officials, Washington, D.C., 1995.

Selig

E. T.

Soil Properties for Plastic Pipe Installation. In Buried Plastic Pipe Technology, STP 1093 ( Buczala

G. S.

and Cassady

M. J.

, eds.), ASTM, Baltimore, 1990.

Section 30: Thermoplastic Pipe. In Standard Specifications for Highway Bridges, Division II—Construction, Interim. American Association of State Highway and Transportation Officials, Washington, D.C., 1998.

Section 26: Metal Culverts. In Standard Specifications for Highway Bridges, Division II—Construction. American Association of State Highway and Transportation Officials, Washington, D.C., 1996.

Section 27: Concrete Culverts. In Standard Specifications for Highway Bridges, Division II—Construction. American Association of State Highway and Transportation Officials, Washington, D.C., 1996.