Corrosion of Reinforcing Steel in Drilled Shafts with Construction Flaws

Abstract

The construction process for drilled shafts sometimes introduces structural flaws such as voids or soil inclusions within the shaft. In that case, the reinforcing steel loses concrete cover and comes in contact with the surrounding soil medium, which creates a favorable environment for corrosion. Corrosion of steel inside concrete, as well as in soil media, has been investigated in the literature. However, the specific case of steel passing through different media (concrete and soil) simultaneously has received little attention. The results of an experimental program designed to investigate the effect of two different media of substantially different pH values on the rate of corrosion of steel reinforcement in sand and clay soils and with different anode-to-cathode-area ratios are presented. Preliminary results suggest that galvanic currents driven by dissimilar media could increase the corrosion rate of exposed steel by 3.3 to 5.6 times, particularly in environments with otherwise low corrosion potential.

Get full access to this article

View all access options for this article.

References

Sarhan

H. A.

, O’Neill

M. W.

, and Tabsh

S. W.

Structural Resistance Factors for Drilled Shafts with Minor Anomalies—Deterministic Study. Department of Civil and Environmental Engineering, University of Houston, Texas, 2000.

Sarhan

H. A.

, and O’Neill

M. W.

Aspects of Structural Design of Drilled Shafts with Minor Flaws for Flexure. Proc., International Deep Foundations Congress 2002, Orlando, Fla., Geotechnical Special Publication No. 116, ASCE, Reston, Va., 2002.

Murray

R. T.

Research Report 380: The Development of Specifications for Soil Nailing. Transportation Research Laboratory, Crowthorne, United Kingdom, 1993.

Greene

M. J.

, and Brady

K. C.

. Project Report 24: Experimental Study into the Corrosion of Buried Metal Coupons. Transportation Research Laboratory, Crowthorne, United Kingdom, 1994.

Bjerrum

Norwegian Experiences with Steel Piles to Rock. Geotechnique, Vol. 7, No. 1, March 1957, pp. 73–96.

Lichtenstein

Fundamentals of Corrosion Causes and Mitigation. Materials Performance, Vol. 17, No. 3, 1978, pp. 29–32.

Mozer

J. D.

, Bianchini

A. C.

, and Kesler

C. E.

. Corrosion of Reinforcing Bars in Concrete. Journal of the American Concrete Institute, Vol. 62, No. 9, 1965, pp. 909–930.

Berke

N. S.

, Dallaire

M. P.

, Hicks

M. C.

, and Hoopes

R. J.

. Corrosion of Steel in Cracked Concrete. Corrosion, Vol. 49, No. 11, 1993, pp. 934–943.

Fischer

K. P.

, Bryhn

, and Aagaard

. Corrosion of Steel in Concrete: Some Fundamental Aspects of Concrete with Added Silica. Corrosion, Vol. 40, No. 7, 1984, pp. 358–365.

10.

Whiting

Influence of Concrete Materials, Mix, and Construction Practices on the Corrosion of Reinforcing Steel. Materials Performance, Vol. 17, No. 12, 1978, pp. 9–15.

11.

Miller

R. L.

, and Hartt

W. H.

. Stray Current and Galvanic Corrosion of Reinforcing Steel in Concrete. Materials Performance, Vol. 15, No. 5, 1976, pp. 20–26.