Effects of Particle and Mix Characteristics on Performance of Some Granular Materials

Abstract

Three types of aggregate—a dolomitic limestone, a granodiorite, and a gravel—were studied to investigate the relationship between the particle properties and their performance in terms of strength, elastic behavior, and resistance to permanent deformation. Particles of each material were assessed for their geometry at both coarse and fine scales. This was quantified using several different measures including particle shape, roughness factor, roundness, sphericity, surface friction characteristics, and angularity. Laboratory tests, using a large shear box (300 × 300 mm) and a large (280-mm-diameter) repeated-load triaxial apparatus, were carried out to understand the significance of the geometry of the particles as well as of their surface friction characteristics and the effect of grading and of compaction. Roundness and angularity are considered to be the major factors affecting ultimate shear strength and permanent deformation. The degree of compaction and consequent density also has a great effect on the shear strength and resistance to permanent deformation. However, an increase in surface friction and surface roughness tends to improve the resilient shear stiffness. A pavement trial on the three aggregates, 300 mm thick over a subgrade, was constructed. Subsequent trafficking indicated that the limestone and the granodiorite performed significantly better than the gravel. It confirms that high roundness and low angularity have a much greater impact on performance than does surface friction when rutting is the chief distress mechanism.

Get full access to this article

View all access options for this article.

References

Barksdale

R. D.

, and Itani

S. Y.

. Influence of Aggregate Shape on Base Behavior. In Transportation Research Record 1227, TRB, National Research Council, Washington, D.C., 1989, pp. 173–182.

Thom

N. H.

, and Brown

S. F.

. The Mechanical Properties of Unbound Aggregates from Various Sources. Proceedings in Unbound Aggregates in Roads, University of Nottingham, Nottingham, England, 1990, pp. 130–142.

Wadell

Volume, Shape and Roundness of Rock Particles. Journal of Geology, Vol. 40, 1932, pp. 443–451.

Zingg

Beitrag zur Schotteranalyse. Schweizerische Mineralogische und Petrographische Mitteilungen (in German), No. 15, 1935, pp. 39–140.

Rosslein

Steinbrecherunter Suchungen Unter Besonderer (in German). Berucksichtigung der Kornform, Berlin. (See also abridged translation by F. A. Shergold, Quarry Managers Journal, Vol. 30, No. 4, pp. 220–222, 1941.)

Krumbein

W. C.

Measurement and Geological Significance of Shape and Roundness of Sedimentary Particles. Journal of Sedimentary Petrology, Vol. 11, No. 2, 1941, pp. 64–72.

Lees

The Measurement of Particle Shape and Its Influence in Engineering Materials, Journal of the British Granite and Whinstone Federation, Vol. 4, 1964, pp. 1–22.

B.S. 812: Testing Aggregates. British Standards Institution, London, 1975.

Aschenbrenner

B. C.

A New Method of Expressing Particle Sphericity. Journal of Sedimentary Petrology, Vol. 26, No. 1, 1956, pp. 15–31.

10.

Wright

A Method of Measuring the Surface Texture of Aggregate. Magazine of Concrete Research, November 1955, Vol. 7, No. 21, pp. 151–160.

11.

Collis

, and Fox

R. A.

. Aggregates: Sand, Gravel and Crushed Rock Aggregates for Construction Purposes. Engineering Geology Special Publication No. 1. Geological Society of London, 1985.

12.

Earland

M. G.

, and Pike

D. C.

. Stability of Gravel Sub-Bases. TRRL Research Report 64. Transport and Road Research Laboratory, Crowthorne, Berkshire, England, 1985.

13.

Fuller

W. B.

, and Thompson

S. E.

. The Laws of Proportioning Concrete. Transaction of the ASCE, Vol. 59, 1907, pp. 67–172.

14.

New Specification for Highway Works. Series 600-800. Department of Transport, London, 1986.

15.

Jewell

R. A.

, and Wroth

C. P.

. Direct Shear Tests on Reinforced Sand. Geotechnique, Vol. 37, No. 1, 1987, pp. 53–68.

16.

Thom

N. H.

Design of Road Foundation. Ph.D. thesis. University of Nottingham, England, 1988.

17.

Cheung

L. W.

Laboratory Assessment of Pavement Foundation Materials. Ph.D. thesis. University of Nottingham, England, 1994.

18.

Sweere

G. T. H.

Unbound Granular Bases for Roads. Ph.D. thesis. Delft University of Technology, Netherlands, 1990.

19.

Fleming

P. R.

, and Rogers

C. D. F.

. Foundation Testing In-Situ for Validation of Design Methods. Final report submitted to Transport Research Laboratory. Loughborough University of Technology, England, 1993.

20.

Almeida

J. R.

Program FENLAP User’s Guide. Department of Civil Engineering, University of Nottingham, England, 1991.

21.

Shaw

Stress-Strain Relationships for Granular Materials Under Repeated Loading. Ph.D. thesis. University of Nottingham, England, 1990.