Influence of Asphalt Tack Coat Materials on Interface Shear Strength

Abstract

Asphalt tack coat is a light application of asphalt, usually asphalt diluted with water. It is used to ensure a bond between the surface being paved and the overlying course. Normally, hot asphalt cements, emulsified asphalts, or cutback asphalts are used as tack coats. The objective of this study was to evaluate the practice of using tack coats through controlled laboratory simple shear tests and determine the optimum application rate. The influence of tack coat types, application rates, and test temperatures on the interface shear strength was examined. Four emulsions (CRS 2P, SS-1, CSS-1, and SS-1h) and two asphalt binders (PG 64-22 and PG 76-22M) were selected as tack coat materials. The residual application rates considered were 0.00 (0.00), 0.09 (0.02), 0.23 (0.05), 0.45 (0.1), and 0.9 (0.2) L/m² (gal/yd²). A simple shear test was performed to determine the shear strength at the interface at two test temperatures, 25°C (77°F) and 55°C (131°F). The results indicated that CRS-2P emulsion was the best tack coat type and 0.09 L/m² (0.02 gal/yd²) was the optimum application rate at which a maximum interface shear strength was measured for both test temperatures.

Get full access to this article

View all access options for this article.

References

The Asphalt Handbook, MS-4. Asphalt Institute, Lexington, Ky., 1989.

Chen

H.-J.

, and Frederick

D. A.

. Interlayers on Flexible Pavements (Abridgment). In Transportation Research Record 1374, TRB, National Research Council, Washington, D.C., 1992, pp. 90–94.

Shahin

, Van Dam

, Kirchner

, and Blackmon

E. W.

. Consequence of Layer Separation on Pavement Performance. Report DOT/FAA/PM-86/48. Federal Aviation Administration, 1987.

Uzan

, Livneh

, Eshed

Investigation of Adhesion Properties Between Asphaltic Concrete Layers. Asphalt Paving Technology, Vol. 47, Proceedings of the Association of Asphalt Paving Technologists, Technical Sessions, Feb. 1978, pp. 495–521.

Mrawira

, and Damude

D. J.

. Revisiting the Effectiveness of Tack Coats in HMA Overlays: The Shear Strength of Tack Coats in Young Overlays. Proc., 14th Annual Conference, Canadian Technical Asphalt Association Proceedings, 1999, pp. 116–129.

Paul

H. R.

, and Scherocman

J. A.

. Friction Testing of Tack Coat Surfaces. In Transportation Research Record 1616, TRB, National Research Council, Washington, D.C., 1998, pp. 6–12.

Hachiya

, and Sato

. Effect of Tack Coat on Bonding Characteristics at Interface Between Asphalt Concrete Layers. Proc., 8th International Conference on Asphalt Pavements, Vol. 1, 1997, pp. 349–362.

Tschegg

E. K.

, Kroyer

, Tan

D.-M.

, Stanzl-Tschegg

S. E.

, and Litzka

. Investigation of Bonding Between Asphalt Layers on Road Construction. Journal of Transportation Engineering, July-Aug. 1995, pp. 309–316.

Louisiana Standard Specifications for Roads and Bridges. State of Louisiana, Department of Transportation and Development, Baton Rouge, 2000.