An analytical solution for the estimation of the ultimate pullout loading capacity of suction piles has been developed by considering two potential failure modes (i.e., the soil tension failure and the pile pullout failure). The analytical solution has been used to identify the dominant failure mode under various circumstances. Finally, the validation of the analytical solution has been made through comparisons with the laboratory model tests results.
Get full access to this article
View all access options for this article.
References
1.
SenpereD., and AuvergneG. A.. Suction Anchor Piles—A Proven Alternative to Driving or Drilling. Presented at the Offshore Technology Conference, No. 4206, 1982.
2.
ClukeyE. C., and MorrisonM. J.. The Response of Suction Caissons in Normally Consolidated Clays to Cyclic TLP Loading Conditions. Presented at the Offshore Technology Conference, No. 7796, 1996.
3.
CottrillA.Skirt Plate to Support Europipe Jacket. Offshore Engineering, 1992.
4.
LarsenP.Suction Anchors as an Anchoring System for Floating Offshore Constructions. Presented at the Offshore Technology Conference, No. 6029, 1989.
5.
FuglsangL. D., and Steensen-BachJ. O.. Breakout Resistance of Suction Piles in Clay. Proc., International Conference: Centrifuge 91, A. A. Balkema, Rotterdam, Netherlands, 1991, pp. 153–159.
6.
NarasimhaR. S., RaviR., and GanapathyC.. Pullout Behavior of Model Suction Anchors in Soft Marine Clays. Proc., 7th International Offshore and Polar Engineering Conference, Honolulu, Hawaii, Vol. I, 1997, pp. 740–743.
7.
OlsonR., and El-GharbawyS.. The Pullout Capacity of Suction Caisson Foundations for Tension Leg Platforms. Proc., ISOPE Conference, Montreal, Canada, Vol. 1, 1998, pp. 531–536.
8.
Steensen-BachJ. O.Recent Model Tests with Suction Piles in Clay and Sand. Presented at the Offshore Technology Conference, No. 6844, 1992.
9.
TjeltaT. I., GuttormsenT. R., and HermstadJ.. Large Scale Penetration Test at a Deepwater Site. Presented at the Offshore Technology Conference, No. 5103, 1986.
10.
BangS., ChoY., PreberT., and ThomasonJ.. Model Testing and Calibration of Suction Pile Installation in Sand. Proc., 11th Asian Regional Conference, ISSMGE, Seoul, Korea, Vol. I, 1999, pp. 253–256.
11.
BangS., and ChoY.. Analysis and Design Methods of Suction Piles: Use of Suction Piles for Mooring of Mobile Offshore Bases—Task 3 Completion Report. Naval Facilities Engineering Service Center, Calif., 2000.
12.
BrownG. A., and NacciV. A.. Performance of Hydrostatic Anchors in Granular Soils. Presented at the Offshore Technology Conference, No. 1472, 1971.
13.
ShugarT. A.Numerical Modeling of Steady-State Plow/Soil Interaction. Technical Report TR-2081-SHR. Naval Facilities Engineering Service Center, Calif., 1997.
14.
TaylorR. J.Drag Embedded Anchor Tests in Sand and Mud. Technical Report TN N-1635. Naval Civil Engineering Laboratory, Port Hueneme, Calif., 1982.
