Effect of Curing Methods on Early-Age and Drying Shrinkage of High-Performance Concrete

Abstract

Many engineers and agencies have observed that the field implementation of high-performance concrete (HPC) is highly dependent on curing and placing conditions. The effect of curing conditions on the early-age properties and long-term durability of HPC is not fully understood. There is a need to expand the knowledge of early-age properties and of the effect of pozzolanic material (like silica fume and fly ash) on drying shrinkage. Results are presented of a study performed to identify the effect of various curing methods on the early-age (autogenous) as well as drying shrinkage of normal and lightweight HPC. The study included a comparison of available analytical models for predicting early-age and drying shrinkage with results from tests performed on different mixes. HPC mixes were developed and evaluated as part of an overall study for the New Jersey Department of Transportation to develop and implement mix designs and technical specifications for HPC transportation structures, such as pavements and bridges. The effect of using three different curing methods on the early-age performance of HPC is presented. The curing conditions consisted of air-dry curing, burlap or moist curing, and use of a curing compound. Results show that moist (burlap) curing should be applied within 1 h after the placement of concrete to improve early-age performance. For very low water-to-cement plus pozzolan ratios, fly ash and lightweight aggregate improved the autogenous shrinkage performance. Moreover, current shrinkage models need to be revised to address HPC mixes.

Get full access to this article

View all access options for this article.

References

Kanstad

, Bjøntegaard

Ø.

, Sellevold

E. J.

, Hammer

T. A.

, and Fidjestøl

Effect of Silica Fume on Early Age Crack Sensitivity of High Performance Concrete. Proc., International RILEM Workshop, Paris, France, Oct. 2000.

Lura

, Van Breugel

, and Maruyama

Effect of Curing Temperature and Type of Cement on Early Age Shrinkage of High Performance Concrete. Cement and Concrete Research, Vol. 31, No. 12, Dec. 2001, pp. 1867–1872.

Igarashi

, Bentur

, and Kovler

Autogenous Shrinkage and Induced Restraining Stresses in High Strength Concretes. Cement and Concrete Research, Vol. 30, No. 11, Nov. 2000, pp. 1701–1707.

Kohno

, Okamoto

, Isikawa

, Sibata

, and Mori

Effects of Artificial Lightweight Aggregate on Autogenous Shrinkage of Concrete. Cement and Concrete Research, Vol. 29, No. 4, April 1999, pp. 611–614.

Miyazawa

, and Tazawa

Prediction Model for Shrinkage of Concrete Including Autogenous Shrinkage. Proc., 6th International Conference on Creep, Shrinkage, and Curability Mechanic of Concrete and Other Quasi-Brittle Materials, Massachusetts Institute of Technology, Cambridge, Mass., Aug. 22-24, 2001.

ACI Committee 209. Prediction of Creep, Shrinkage and Temperature Effects in Concrete Structures. Report ACI 209 R-92. American Concrete Institute, Farmington Hills, Mich., 1992.

Euro-International Concrete Committee and International Federation for Prestressing. CEB-FIP Model Code 1990: Design Code. T. Telford, London, 1993.

Branson

D. E.

, and Christiason

M. L.

Time-Dependent Concrete Properties Related to Design-Strength and Elastic Properties, Creep, and Shrinkage. SP 76. American Concrete Institute, Farmington Hills, Mich., 1982, pp. 257–277.

Muller

H. S.

, and Hillsdorf

H. K.

Evaluation of the Time-Dependent Behavior of Concrete, Summary Report on the Work of General Task Group 9. Comite Euro-International du Beton (CEB) Bulletin d'Information No. 199, Sept. 1990.

10.

Bazant

Z. P.

, and Murphy

W. P.

Creep and Shrinkage Prediction Model for Analysis and Design of Concrete Structures—Model B3. Materials and Structures, Vol. 28, No. 180, July 1995, pp. 357–365.

11.

Bazant

Z. P.

, and Baweja

Justification and Refinements of Model B3 for Concrete and Shrinkage 1: Statistics and Sensitivity. Materials and Structures, Vol. 28, No. 181, Aug.–Sept. 1995, pp. 415–430.

12.

Bazant

Z. P.

, and Baweja

Justification and Refinements of Model B3 for Concrete and Shrinkage 2: Updating and Theoretical Basis. Materials and Structures, Vol. 28, No. 182, Oct. 1995, pp. 488–495.

13.

Gardner

N. J.

, and Lockman

Design Provision for Drying Shrinkage and Creep of Normal-Strength Concrete. ACI Materials Journal, Vol. 98, March–April 2001, pp. 159–167.

14.

Guide for Selecting Proportions for High Strength Concrete with Portland Cement and Fly Ash. ACI Manual of Concrete Practice, Part I. ACI 211.4R.93. American Concrete Institute, Farmington Hills, Mich., 1994.