Evaluating the Light Falling Weight Deflectometer Device for in Situ Measurement of Elastic Modulus of Pavement Layers

Abstract

Field and laboratory testing programs were conducted to evaluate the potential use of the light falling weight deflectometer (LFWD) device for measuring the in situ elastic modulus of pavement layers and subgrades. The field tests were conducted on several highway sections selected from different projects in Louisiana. In addition, nine test sections were constructed and tested at the Pavement Research Facility site of Louisiana Transportation Research Center. All sections were tested using the Prima 100 model-LFWD in conjunction with the falling weight deflectometer (FWD), plate load test (PLT), and dynamic cone penetrometer (DCP) tests that were used as reference measurements. Linear regression analyses were carried out on the collected test data to develop models that could directly relate the LFWD stiffness modulus with moduli obtained from FWD and PLT and the DCP penetration rate. In addition, multiple nonlinear regression analyses were conducted to develop models that could predict FWD and PLT moduli on the basis of the LFWD elastic moduli and selected soil properties (moisture content and void ratio) of the tested materials. The results showed that the FWD, PLT moduli, and DCP-penetration rate could be predicted directly with LFWD at a significant confidence level. However, the prediction models were improved when the soil properties were included as variables. Laboratory tests also were conducted to determine the influence depth of the LFWD, and the results of these tests showed that the LFWD influence depth ranged from 270 to 280 mm.

Get full access to this article

View all access options for this article.

References

Fleming

P. R.

Recycled Bituminous Planings as Unbound Granular Materials for Road Foundations in the UK. Proc., 5th International Conference on Bearing Capacity of Roads and Airfields, Vol. 3, Trondheim, Norway, 1998.

Fleming

P. R.

Field Measurement of Stiffness Modulus for Pavement Foundations. Presented at 80th Annual Meeting of the Transportation Research Board, Washington, D.C., 2001.

Livneh

and Goldberg

. Quality Assessment During Road Formation and Foundation Construction: Use of Falling-Weight Deflectometer and Light Drop Weight. In Transportation Research Record 1755, TRB, National Research Council, Washington, D.C., 2001, pp. 69–77.

Fleming

P. R.

Frost

M. W.

and Rogers

C. D. F.

. A Comparison of Devices for Measuring Stiffness In-Situ. Proc., 5th International Conference on Unbound Aggregate in Roads, Nottingham, United Kingdom, 2000.

Kamiura

Sekine

Abe

and Meruyama

. Stiffness Evaluation of the Subgrade and Granular Aggregate Using the Portable FWD. Proc., 5th International Conference on Unbound Aggregate in Roads, Nottingham, United Kingdom, 2000.

Abu-Farsakh

M. Y.

Alshibli

Nazzal

M. D.

and Seyman

. Assessment of In Situ Test Technology for Construction Control of Base Courses and Embankments. Report No. FHWA/LA.04/389. Louisiana Transportation Research Center, Baton Rouge, 2003.

Kleyn

E. G.

The Use of the Dynamic Cone Penetrometer (DCP). Report 2/74. Transvaal Roads Department, Pretoria, South Africa, 1975.

Odemark

Investigations as to the Elastic Properties of Soils and Design of Pavements According to the Theory of Elasticity. Statens Väginstitut, Mitteilung No. 77, Stockholm, Sweden, 1949.

Chen

D.-H.

and Bilyeu

. Comparison of Resilient Moduli Between Field and Laboratory Testing: Case Study. Presented at 78th Annual Meeting of the Transportation Research Board Washington, D.C., 1999.

10.

Pen

C. K.

An Assessment of the Available Methods of Analysis for Estimating the Elastic Moduli of Road Pavements. Proc., 3rd International Conference on Bearing Capacity of Roads and Airfields, Trondheim, Norway, 1990.