Longitudinal Progression of Burst Head during Pipe Bursting

Abstract

Axisymmetric finite element analysis is used to model the forward movement of the burst head along the pipe axis during static pipe bursting. The modeling procedures are described, including treatment of the mixed boundary condition at the interface between the bursting head and the surrounding material, along which radial displacements are imposed to match the cavity expansion as the rigid burst head displaces the surrounding ground, and friction is also modeled. Calculations are reported for the four pipe bursting configurations considered in an earlier laboratory study. Comparisons of calculated and measured values of pulling force reveal that the new finite element procedure provides effective measurements of the resistance of the burst head to forward progression and the total force required to pull the bursting head and new pipe through the old pipe system. The numerical procedure could be used in future studies to estimate pulling force requirements for specific projects, considering the burial depth, soil material, degree of pipe upsize, and specific geometry of the pipe bursting head.

Get full access to this article

View all access options for this article.

References

Simicevic

, and Sterling

Guidelines for Pipe Bursting. U.S. Army Corps of Engineers, 2001.

Fernando

, and Moore

I. D.

Use of Cavity Expansion Theory to Predict Ground Movements During Pipe Bursting. Proc., Pipelines 2002: Beneath Our Feet: Challenges and Solutions, American Society of Civil Engineers, Cleveland, Ohio, 2002.

H. S.

, and Houlsby

G. T.

A Large Strain Analytical Solution for Cavity Contraction in Dilatants Soils. International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 19, 1995, pp. 793–811.

Lapos

, Brachman

R. W. I.

, and Moore

I. D.

Laboratory Measurements of Pulling Force and Ground Movement During a Pipe Bursting Test. Presented at NO-DIG 2004, North American Society for Trenchless Technology, New Orleans, La., 2004.

Fernando

Simulating Ground Response During Pipe Bursting. ME thesis. Faculty of Engineering Science, University of Western Ontario, London, Ontario, Canada, 2002.

Nkemitag

, and Moore

I. D.

Rational Guidelines for Expected Ground Disturbance During Static Pipe Bursting Through Sand. Presented at NO-DIG 2006, North American Society for Trenchless Technology, Nashville, Tenn., 2006.

Nkemitag

Analysis of Pipe Bursting. PhD thesis. Department of Civil Engineering, Queen's University at Kingston, Ontario, Canada, 2006.

Carter

J. P.

, and Balaam

N. P.

AFENA-A General Finite Element Algorithm: User Manual. School of Civil and Mining Engineering, University of Sydney, New South Wales, Australia, 2006.

Carter

J. P.

, Booker

J. R.

, and Davis

E. H.

Finite Deformation of an Elasto-Plastic Soil. International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 1, 1977, pp. 25–43.

10.

Lapos

, and Moore

I. D.

Evaluation of the Strength and Deformations Properties of Olimag Synthetic Olivine. Proc., 55th Canadian Geotechnical Conference, Niagara Falls, Ontario, Canada, 2002, pp. 729–734.