Development and Significance of Statewide Volume Adjustment Factors in Mechanistic

Abstract

A new Mechanistic–Empirical Pavement Design Guide (MEPDG) has been developed under NCHRP Project 1-37A. Pavement design procedures recommended for use in MEPDG represent a significant departure from current procedures. The MEPDG requires new traffic inputs for estimating the magnitude, configuration, and frequency of the loads that are applied throughout the pavement design life. The Arkansas State Highway and Transportation Department (AHTD) sponsored research in which one objective was development of statewide truck traffic volume adjustment factors, including class and monthly and hourly distribution factors, and evaluating significance of the developed inputs in the MEPDG. The AHTD provided classification data collected at 55 weigh-in-motion (WIM) sites from 2003 through 2005. Because of missing and inaccurate classification data at several WIM sites, only 23 sites provided classification data suitable for this study. On the basis of selected data, statewide monthly, hourly, and class distribution factors were developed for Arkansas. Analyses using the MEPDG showed the state-specific class distribution factors to have a significant effect on predicted pavement performance, compared with predictions generated by using default distribution values. However, the effect of using state-specific monthly and hourly distribution factors on predicted pavement performance rather than default values was not significant. Therefore, it is recommended that the state-specific class distribution factors be used with the default monthly and hourly distribution factors in the MEPDG. In addition, periodic review and update of statewide class distribution factors, as necessary, are recommended.

Get full access to this article

View all access options for this article.

References

Guide for Design of Pavement Structures. AASHTO, Washington, D.C., 1993.

ARA, Inc., ERES Consultants Division. Guide for Mechanistic–Empirical Design of New and Rehabilitated Pavement Structures. NCHRP Project 1-37A, Final Report. Transportation Research Board of the National Academies, Washington, D.C., 2004.

Traffic Monitoring Guide. FHWA, U.S. Department of Transportation, 2001.

Hallenbeck

, and Weinblatt

NCHRP Report 509: Equipment for Collecting Traffic Load Data. Transportation Research Board of the National Academies, Washington, D.C., 2004.

Tam

W. O.

, and Von Quintus

Use of Long-Term Pavement Performance Data to Develop Traffic Defaults in Support of Mechanistic–Empirical Pavement Design Procedures. In Transportation Research Record: Journal of the Transportation Research Board, No. 1855, Transportation Research Board of the National Research Council, Washington, D.C., 2003, pp. 176–182.

Al-Yagout

M. A.

, Mahoney

, Pierce

, and Hallenbeck

Improving Traffic Characterization to Enhance Pavement Design and Performance: Load Spectra Development. WA-RD 600.1, Washington State Transportation Center, University of Washington, Seattle, 2005.

Guide to LTPP Traffic Data Collection and Processing. FHWA, U.S. Department of Transportation, 2001.

Tran

N. H.

, and Hall

K. D.

Projected Traffic Loading for Mechanistic–Empirical Pavement Design Guide. Draft Final Report. University of Arkansas, Fayetteville, 2006.

Buchanan

Traffic Load Spectra Development for the 2002 AASHTO Pavement Design Guide. FHWA/MS-DOT-RD-04-165. Mississippi State University, Mississippi State, 2004.

10.

Buchanan

Influence of Truck Volume Distribution on Flexible Pavement Performance. Presented at 84th Annual Meeting of the Transportation Research Board, Washington, D.C., 2005.

Development and Significance of Statewide Volume Adjustment Factors in Mechanistic–Empirical Pavement Design Guide

Abstract

Get full access to this article

References