Carbon nanofibers (CNFs) and nanotubes (CNTs) are known to be extremely strong and stiff, and their potential as reinforcement has been of interest to many investigators in the past decade. One of the most important keys for fully harnessing the properties of any type of fiber is to control the distribution in the material matrix. As far as CNFs–CNTs are concerned, the strong attraction among nanoscale fibers due to van der Waals forces makes this task difficult. This study focuses on some of the problems that prevent a uniform distribution of CNFs–CNTs in cement paste and the methods used in the past to enhance dispersion. The first phase of the experimental program investigates the effect of using superplasticizers accompanied by sonication on the dispersion of CNFs in water and paste. The second phase focuses on the problem of cement grain size and limitations that the use of fine grain cement causes. Finally, on the basis of results and past studies, suggestions are made for achieving enhanced dispersion of CNFs–CNTs in cement paste.
Get full access to this article
View all access options for this article.
References
1.
SalvetatJ. P., and KulikA. J.Electronic and Mechanical Properties of Carbon Nanotubes. Advanced Materials, Vol. 22, 1997, pp. 1–7.
2.
WongE. W., SheehanP. E., and LieberC. M.Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes. Science, Vol. 277, No. 5334, 1997, pp. 1971–1975.
3.
YuM.-F., LourieO., DyerM. J., MoloniK., KellyT. F., and RuoffR. S.Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load. Science, Vol. 287, No. 5453, 2000, pp. 637–640.
4.
WaltersD. A., EricsonL. M., CasavantM. J., LiuJ., ColbertD. T., SmithK. A., and SmalleyR. E.Elastic Strain of Freely Suspended Single-Wall Carbon Nanotube Ropes. Applied Physics Letters, Vol. 74, No. 25, 1999, pp. 3803–3805.
5.
LourieO., CoxD. M., and WagnerH. D.Buckling and Collapse of Embedded Carbon Nanotubes. Physical Review Letters, Vol. 81, No. 8, 1998, pp. 1638–1641.
6.
YakobsonB., and AvourisP.Mechanical Properties of Carbon Nanotubes. In Carbon Nanotubes (DresselhausM. S., DresselhausG., and AvourisP., eds.), Vol. 80, Springer, Berlin, 2001, pp. 287–327.
7.
OzkanT., ChenQ., NaraghiM., and ChasiotisI.Mechanical and Interface Properties of Carbon Nanofibers for Polymer Nanocomposites.Society for the Advancement of Material and Process Engineering, Memphis, Tenn., 2008.
8.
LiG. Y., WangP. M., and ZhaoX.Mechanical Behavior and Microstructure of Cement Composites Incorporating Surface-Treated Multiwalled Carbon Nanotubes. Carbon, Vol. 43, No. 6, 2005, pp. 1239–1245.
9.
TrettinR., and KowaldT.Nanotubes fur Hochleistungsbetone (Nanotubes for High-Performance Concretes). Betonwerk und Fertigteil-Technik (Concrete Precasting Plant and Technology), Vol. 71, No. 2, 2005, pp. 20–21.
10.
CwirzenA., Habermehl-CwirzenK., and PenttalaV.Surface Decoration of Carbon Nanotubes and Mechanical Properties of Cement/Carbon Nanotube Composites. Advances in Cement Research, Vol. 20, No. 2, 2008, pp. 65–73.
11.
WangX., YeJ., WangY., and ChenL.Reinforcement of Calcium Phosphate Cement by Bio-Mineralized Carbon Nanotube. Journal of the American Ceramic Society, Vol. 90, No. 3, 2007, pp. 962–964.
12.
YakovlevG., KerieneJ., GailiusA., and GirnieneI.Cement Based Foam Concrete Reinforced by Carbon Nanotubes. Materials Science, Vol. 12, No. 2, 2006, pp. 147–151.
13.
YakovlevG., KerieneY., and KrutikovV.Nanoreinforcement of Foam Concrete. ETH Honggerberg, Budapest, Hungary, 2006, pp. 222–223.
14.
YazdanbakhshA., GrasleyZ., TysonB., and Abu Al-RubR. K.Carbon Nanofibers and Nanotubes in Cementitious Materials: Some Issues on Dispersion and Interfacial Bond. ACI Special Publication, Vol. 267, 2009, pp. 21–34.
15.
MooreV. C., StranoM. S., HarozE. H., HaugeR. H., SmalleyR. E., SchmidtJ., and TalmonY.Individually Suspended Single-Walled Carbon Nanotubes in Various Surfactants. Nano Letters, Vol. 3, No. 10, 2003, pp. 1379–1382.
16.
GogotsiY., NaguibN., and LiberaJ. A.In Situ Chemical Experiments in Carbon Nanotubes. Chemical Physics Letters, Vol. 365, Nos. 3–4, 2002, pp. 354–360.
17.
GogotsiY., LiberaJ. A., Guvenc-YaziciogluA., and MegaridisC. M.In Situ Multiphase Fluid Experiments in Hydrothermal Carbon Nanotubes. Applied Physics Letters, Vol. 79, No. 7, 2001, pp. 1021–1023.
18.
YaoN., LordiV., MaS. X. C., DujardinE., KrishnanA., TreacyM. M. J., and EbbesenT. W.Structure and Oxidation Patterns of Carbon Nanotubes. Journal of Materials Research, Vol. 13, No. 9, 1998, pp. 2432–2437.
19.
TchoulM. N., FordW. T., LolliG., ResascoD. E., and ArepalliS.Effect of Mild Nitric Acid Oxidation on Dispersability, Size, and Structure of Single-Walled Carbon Nanotubes. Chemistry of Materials, Vol. 19, No. 23, 2007, pp. 5765–5772.
20.
KowaldT.Influence of Surface-Modified Carbon Nanotubes on Ultrahigh Performance Concrete. International Symposium on Ultra High Performance Concrete, 2004, pp. 195–203.
21.
MakarJ. M., and BeaudoinJ. J.Carbon Nanotubes and Their Application in the Construction Industry. 1st International Symposium on Nanotechnology in Construction, Paisley, United Kingdom, 2004, pp. 331–341.
22.
MakarJ., MargesonJ., and LuhJ.Carbon Nanotube/Cement Composites—Early Results and Potential Applications. 3rd International Conference on Construction Materials: Performance, Innovations and Structural Implications, Vancouver, British Columbia, Canada, 2005.
23.
NasibulinA. G., ShandakovS. D., NasibulinaL. I., CwirzenA., MudimelaP. R., Habermehl-CwirzenK., GrishinD. A., GavrilovY. V., MalmJ. E. M., TapperU., TianY., PenttalaV., KarppinenM. J., and KauppinenE. I.A Novel Cement-Based Hybrid Material. New Journal of Physics, Vol. 11, 2009, pp. 1–11.
24.
SureshG. A.Processing and Properties of Nanocomposites, 1st ed. World Scientific Publishing Co., Singapore, 2007.
25.
BakerR. T. K.Synthesis, Properties and Applications of Graphite Nanofibers. WTEC Workshop Report on R&D Status and Trends in Nanoparticles, Nanostructured Materials, and Nanodevices in the United States.World Technology Evaluation Center, Lancaster, Pa., 1997.
26.
BanfillP. F. G.A Discussion of the Papers “Rheological Properties of Cement Mixes” by M. Daimon and D. M. Roy. Cement and Concrete Research, Vol. 9, No. 6, 1979, pp. 795–796.
27.
BentzD. P., GarbocziE. J., HaeckerC. J., and JensenO. M.Effects of Cement Particle Size Distribution on Performance Properties of Portland Cement-Based Materials. Cement and Concrete Research, Vol. 29, No. 10, 1999, pp. 1663–1671.
28.
MehtaP. K.Durability—Critical Issues for the Future. Concrete International, Vol. 19, No. 7, 1997, pp. 27–33.
