Direct Measurement of the Impact of Heavy Loads on Thin Membrane Pavements

This paper presents the results of a field study of the loads imposed by heavy oilfield cranes (with hydraulic suspensions and super single tires) on thin membrane asphalt pavements in Alberta, Canada. Three 150-m test road sections (thin asphalt wearing course, bituminous surface treatment, and granular surface) were built and instrumented for strain at the bottom of the asphalt layer, surface deflection, and subgrade pressures. Temperature and moisture profiles were also measured. Field testing involved controlled speed experiments of standard axle configurations and heavy-axle (12,000-kg) vehicles with and without hydraulic suspensions. Focusing on the hot-mix asphalt section, this paper presents a description of the test road design, instrumentation, and testing plan, followed by some results and findings from two seasons (spring and fall 2005) of testing. Vertical stress in the subgrade, longitudinal interfacial strain, and surface deflection are compared for three vehicle types used in the test. Results from tests show that subgrade stress and interfacial strain are very similar for the standard axle configuration during spring compared with those of the cranes without the dolly during the fall season. It could be argued that on the basis of the pavement response, the cranes could operate during the winter season without the dolly (and thereby increase road safety by removing a long combination vehicle from the traffic stream) without causing substantial long-term deterioration.