Measuring the Effect of Moisture on Asphalt–Aggregate Bond with the Bitumen Bond Strength Test

Abstract

Understanding moisture damage mechanisms in asphalt pavements and evaluating the right combination of materials that are resistant to moisture damage are important. Moisture damage is the loss of strength or stiffness in asphalt mixtures caused by a combination of mechanical loading and moisture. Many test methods have been developed to evaluate loss of adhesion and cohesion in binders. However, a simple procedure to address moisture damage in the asphalt–aggregate interface is not available. The feasibility of the newly developed bitumen bond strength (BBS) test for moisture damage characterization was investigated. An experimental matrix that included various binders, modifications, and aggregates to account for the chemical and physical conditions in the aggregate–asphalt interface was completed. A statistical analysis was performed to verify reproducibility of the BBS test. The results indicated that the bond strength of asphalt–aggregate systems was highly dependent on modification and moisture exposure time. Polymers were found to improve the adhesion between asphalt and aggregate as well as the cohesion within the binder. Results from this study indicated that the BBS test was repeatable and reproducible. To further validate the effectiveness of the BBS test, a comparison of the BBS test results and the modified dynamic shear rheometer strain sweep test was conducted. The comparison showed that the BBS test could rank materials similarly to a more sophisticated and time-consuming test.

Get full access to this article

View all access options for this article.

References

Cho

D. -W.

, and Kim

The Mechanisms of Moisture Damage in Asphalt Pavement by Applying Chemistry Aspects. KSCE Journal of Civil Engineering, Vol. 14, No. 3, 2010, pp. 333–342.

Copeland

A.R.

, Youtcheff

J.S.

Jr. , and Shenoy

Moisture Sensitivity of Modified Asphalt Binders: Factors Influencing Bond Strength. In Transportation Research Record: Journal of the Transportation Research Board, No. 1998, Transportation Research Board of the National Academies, Washington, D.C., 2007, pp. 18–28.

Kringos

, and Scarpas

Raveling of Asphaltic Mixes Due to Water Damage: Computational Identification of Controlling Parameters. In Transportation Research Record: Journal of the Transportation Research Board, No. 1929, Transportation Research Board of the National Academies, Washington, D.C., 2005, pp. 79–87.

Bhasin

, Masad

E.A.

, Little

D.N.

, and Lytton

R. L.

Limits on Adhesive Bond Energy for Improved Resistance of Hot-Mix Asphalt to Moisture Damage. In Transportation Research Record: Journal of the Transportation Research Board, No. 1970, Transportation Research Board of the National Academies, Washington, D.C., 2006, pp. 3–13.

Canestrari

, Cardone

, Graziani

, Santagata

, and Bahia

H. U.

Adhesive and Cohesive Properties of Asphalt-Aggregate Systems Subjected to Moisture Damage. Road Materials and Pavement Design, Vol. 11, 2010, pp. 11–32.

Kanitpong

, and Bahia

H. U.

Role of Adhesion and Thin Film Tackiness of Asphalt Binders in Moisture Damage of HMA. Asphalt Paving Technology, Vol. 72, 2003, pp. 502–528.

Youtcheff

, and Aurilio

Moisture Sensitivity of Asphalt Binders: Evaluation and Modeling of the Pneumatic Adhesion Test Results. Proc., 42nd Annual Conference of Canadian Technical Asphalt Association, 1997, pp. 180–200.

Packham

D. E.

Handbook of Adhesion. Longman Scientific & Technical, Harlow, United Kingdom, 1992, 2005.

Petrie

E. M.

Handbook of Adhesives and Sealants. McGraw–Hill, New York, 1999.

10.

Bhasin

, Little

D.N.

, Vasconcelos

K.L.

, and Masad

E. A.

Surface Free Energy to Identify Moisture Sensitivity of Materials for Asphalt Mixes. In Transportation Research Record: Journal of the Transportation Research Board, No. 2001, Transportation Research Board of the National Academies, Washington, D.C., 2007, pp. 37–45.

11.

Terrel

R.L.

, and Shute

J. W.

SHRP-A/IR-89-003: Summary Report on Water Sensitivity. National Research Council, Washington, D.C., 1989.

12.

Johnson

D.R.

, and Freeman

R. B.

Rehabilitation Techniques for Stripped Asphalt Pavements. FHWA/MT-002-003/8123. Western Transportation Institute, Bozeman, Mont., 2002.

13.

Bahia

H.U.

, Hanz

, Kanitpong

, and Wen

Testing Methods to Determine Aggregate/Asphalt Adhesion Properties and Potential Moisture Damage. WHRP 07-02. Wisconsin Highway Research Program, Madison, 2007.

14.

Xiao

F.P.

, Amirkhanian

S.N.

, and Juang

C. H.

Rutting Resistance of Rubberized Asphalt Concrete Pavements Containing Reclaimed Asphalt Pavement Mixtures. Journal of Materials in Civil Engineering, Vol. 19, 2007, pp. 475–483.

15.

Robertson

R. E.

SHRP-A/UWP-91-510: Chemical Properties of Asphalts and Their Relationship to Pavement Performance. National Research Council, Washington, D.C., 1991.

16.

Plancher

, Dorrence

S.M.

, and Petersen

J. C.

Identification of Chemical Types in Asphalts Strongly Absorbed at Asphalt-Aggregate Interface and Their Relative Displacement by Water. Proceedings of the Association of Asphalt Paving Technologists, Vol. 46, 1977, pp. 151–175.

17.

Petersen

J.C.

, Plancher

, Ensley

E.K.

, Venable

R.L.

, and Miyake

Chemistry of Asphalt–Aggregate Interaction: Relationship with Pavement Moisture-Damage Prediction Test. In Transportation Research Record 843, TRB, National Research Council, Washington, D.C., 1982, pp. 95–104.

18.

Tarrer

A.R.

, and Wagh

SHRP-A/UIR-91-507: The Effect of the Physical and Chemical Characteristics of the Aggregate on Bonding. National Research Council, Washington, D.C., 1992.

19.

Bhasin

Development of Methods to Quantify Bitumen-Aggregate Adhesion and Loss of Adhesion Due to Water. PhD thesis. Texas A&M University, College Station, 2006.

20.

Yoon

H.H.

, and Tarrer

A. R.

Effect of Aggregate Properties on Stripping. In Transportation Research Record 1171, TRB, National Research Council, Washington, D.C., 1988, pp. 37–43.

21.

Castan

Rising of Binder to the Surface of an Open-Graded Bituminous Mix. Bulletin de Liaison des Laboratoires Routiers, No. 33, 1968, pp. 77–84.

22.

Meng

Affinity of Asphalt to Mineral Aggregate: Pull-off Test Evaluation. MS thesis. University of Wisconsin, Madison, 2010.

23.

Cho, D.-W. Study of Asphalt-Aggregate Bond in Simple Simulation Using the Dynamic Shear Rheometer. PhD thesis. University of Wisconsin, Madison, 2008.

24.

McClave

, and Sincich

Statistics, 9th ed. Prentice Hall, Englewood Cliffs, N.J., 2003.