Probabilistic Model for Design of Freeway Acceleration Speed-Change Lanes

Abstract

A speed-change lane (SCL) is an auxiliary lane added to the traveled way for the acceleration and deceleration of vehicles entering or leaving a roadway. When the length of an acceleration SCL is adequate, drivers are able to accelerate comfortably from the speed at entrance to a speed appropriate to the road, find a gap in the traffic flow, and merge in a safe and secure manner. The length of an SCL is currently determined in terms of the ramp design speed, the freeway design speed, and the acceleration rate. Embedded in these values are assumptions for the operating speed at the entrance and merging points. This study examined a probabilistic approach instead of such a deterministic approach. The main benefit of a probabilistic approach is that traffic flow characteristics are assumed to be stochastic; therefore, the outcome of a probabilistic methodology is a distribution of drivers’ acceleration distance on the SCL. The reliability-based analysis enables designers to select a specific percentile value of this distribution as a design length that better matches a certain situation and avoids unnecessary extra construction costs. This paper presents analytical and simulation models for the application of the reliability approach, with all parameters based on recently collected field data. Even though the presented model should be superior to the deterministic model adopted in current design guides, additional enhancements are recommended for a full reliability-based, safety-explicit design model.

Get full access to this article

View all access options for this article.

References

Fuller

, and Santo

Human Factors for Highway Engineers. Elsevier Science Ltd., Kiklington, Oxford, United Kingdom, 2002.

A Policy on Geometric Design of Highways and Streets. AASHTO, Washington, D.C., 2004.

Geometric Design Guide for Canadian Roads. Transportation Association of Canada, Ottawa, Ontario, 1999.

Sarhan

, Hassan

, and Abd El Halim

A. O.

. Safety Performance of Freeway Sections and Relation to Length of Speed Change Lanes. Canadian Journal of Civil Engineering, Vol. 34, No. 5, 2008, pp. 531–541.

Ismail

, and Sayed

Risk-Based Framework for Accommodating Uncertainty in Highway Geometric Design. Canadian Journal of Civil Engineering, Vol. 36, No. 5, 2009, pp. 743–753.

Sarhan

, and Hassan

Three-Dimensional, Probabilistic Highway Design: Sight Distance Application. In Transportation Research Record: Journal of the Transportation Research Board, No. 2060, Transportation Research Board of the National Academies, Washington, D.C., 2008, pp. 10–18.

Ahammed

A.M.

, Hassan

, and Sayed

Modeling Driver Behavior and Safety on Freeway Merging Areas. Journal of Transportation Engineering, Vol. 134, No. 9, 2008, pp. 370–377.

Fitzpatrick

, and Zimmerman

K.H.

Potential Updates to 2004 Green Book's Acceleration Lengths for Entrance Terminals. In Transportation Research Record: Journal of the Transportation Research Board, No. 2023, Transportation Research Board of the National Academies, Washington, D.C., 2007, pp. 130–139.

A Policy on Geometric Design of Rural Highways. AASHO, Washington, D.C., 1965.

10.

Transportation Research E-Circular E-C151: Modeling Operating Speed: Synthesis Report. Transportation Research Board of the National Academies, Washington, D.C., 2011.

11.

Blumenfeld

D.E.

, and Weiss

G.H.

Merging from Acceleration Lane. Journal of Transportation Science, Vol. 5, No. 2, 1971, pp. 161–168.

12.

Olsen

R.A.

, and Hostetter

R.S.

Describing and Shaping Merging Behavior of Freeway Drivers. In Transportation Research Record 605, TRB, National Research Council, Washington, D.C., 1976, pp. 7–13.

13.

Huberman

The Development and Evaluation of a Technique for Measuring Vehicle Acceleration on Highway Entrance Ramps. RTAC Forum, Vol. 4, No. 2, 1982, pp. 90–96.

14.

Kou

C.C.

, and Machemehl

R.B.

Modelling Vehicle Acceleration–Deceleration Behavior During Merge Maneuvers. Canadian Journal of Civil Engineering, Vol. 24, No. 3, 1997, pp. 350–358.

15.

Hunter

, Machemehl

, and Tsyganov

Operational Evaluation of Freeway Ramp Design. In Transportation Research Record: Journal of the Transportation Research Board, No. 1751, TRB, National Research Council, Washington, D.C., 2001, pp. 90–100.

16.

Liapis

E.D.

, Psarianos

, and Kasapi

Speed Behavior Analysis at Curved Ramp Sections of Minor Interchanges. In Transportation Research Record: Journal of the Transportation Research Board, No. 1751, TRB, National Research Council, Washington, D.C., 2001, pp. 35–43.

17.

Navin

F.P.D.

, and Zheng

J.R.

Application of Reliability Theory to Highway Geometric Design. Presented at 77th Annual Meeting of the Transportation Research Board, Washington, D.C., 1998.

18.

Easa

S. M.

Reliability Approach to Intersection Sight Distance Design. In Transportation Research Record: Journal of the Transportation Research Board, No. 1701, TRB, National Research Council, Washington, D.C., 2000, pp. 42–52.

19.

Sarhan

, and Hassan

Risk-Based Approach for Highway Geometric Design. International Journal of Advances in Transportation Studies, Vol. XV, July 2008, pp. 37–48.

20.

Ibrahim

S.E.

, and Sayed

Developing Safety Performance Functions Incorporating Reliability-Based Risk Measures. Accident Analysis & Prevention, Vol. 43, No. 6, 2011, pp. 2153–2159.

21.

Salehi

Reliability-Based Design of Freeway Acceleration Speed-Change Lanes. M.A. Sc. thesis. Carleton University, Ottawa, Ontario, Canada, 2010.

22.

Kaiser

H.F.

, and Dickman

Sample and Population Score Matrices and Sample Correlation Matrices from an Arbitrary Population Correlation Matrix. Psychomerika, Vol. 27, No. 2, 1962, pp. 179–182.

23.

Choi

, Grandhi

R. V.

, and Canfield

R. A.

Reliability-Based Structural Design. Springer-Verlag, London Ltd, London, 2007.