Simulating Ballast Shear Strength from Large-Scale Triaxial Tests

Abstract

The railroad ballast layer consists of discrete aggregate particles, and the discrete element method (DEM) is the most widely adopted numerical method to simulate the particulate nature of ballast materials and their particle interactions. Large-scale triaxial tests performed in the laboratory under controlled monotonic and repeated loading conditions are commonly considered the best means to measure macroscopic mechanical properties of ballast materials, such as strength, modulus, and deformation characteristics, directly related to load-carrying and drainage functions of the ballast layer in the field. A DEM modeling approach is described for railroad ballast with realistic particle shapes developed from image analysis to simulate large-scale triaxial compression tests on a limestone ballast material. The ballast DEM model captures the strength behavior from both the traditional slow and the rapid shear loading rate types of monotonic triaxial compression tests. The results of the experimental study indicated that the shearing rate had insignificant influence on the results of the triaxial compression tests. The results also showed that the incremental displacement approach captured the measured shearing response, yet could save significant computational resources and time. This study shows that the DEM simulation approach combined with image analysis has the potential to be a quantitative tool to predict ballast performance.

Get full access to this article

View all access options for this article.

References

Suiker

A. S. J.

, Selig

E. T.

, and Frenkel

Static and Cyclic Triaxial Testing of Ballast and Subballast. Journal of Geotechnical and Geo-environmental Engineering, Vol. 131, No. 6, 2005, pp. 771–782.

Anderson

W. F.

, and Fair

Behavior of Railroad Ballast Under Mono-tonic and Cyclic Loading. Journal of Geotechnical and Geoenvironmental Engineering, Vol. 134, No. 3, 2008, pp. 316–327.

Aursudkij

, McDowell

G. R.

, and Collop

A. C.

Cyclic Loading of Railway Ballast Under Triaxial Conditions and in a Railway Test Facility. Granular Matter, Vol. 11, No. 6, 2009, pp. 391–401.

Indraratna

, Thakur

P. K.

, and Vinod

J. S.

Experimental and Numerical Study of Railway Ballast Behavior Under Cyclic Loading. International Journal of Geomechanics, Vol. 10, No. 4, 2010, pp. 136–144.

, and McDowell

G. R.

Discrete Element Modeling of Railway Ballast Under Monotonic and Cyclic Triaxial Loading. Geotechnique, Vol. 60, No. 6, 2010, pp. 459–467.

Tutumluer

, Huang

, Hashash

Y. M. A.

, and Ghaboussi

Aggregate Shape Effects on Ballast Tamping and Railroad Track Lateral Stability. Proc., American Railway Engineering and Maintenance-of-Way Association Annual Conference, Sept. 17–20, Louisville, Ky., American Railway Engineering and Maintenance-of-Way Association, Lanham, Md., 2006.

Ghaboussi

, and Barbosa

Three-Dimensional Discrete Element Method for Granular Materials. International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 14, No. 7, 1990, pp. 451–472.

Nezami

E. G.

, Hashash

Y. M. A.

, Zhao

, and Ghaboussi

Shortest Link Method for Contact Detection in Discrete Element Method. International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 30, No. 8, 2006, pp. 783–801.

Huang

, and Tutumluer

Discrete Element Modeling for Fouled Railroad Ballast. Construction and Building Materials, Vol. 25, No. 8, 2011, pp. 3306–3312.

10.

Tutumluer

, Huang

, Hashash

Y. M. A.

, and Ghaboussi

Discrete Element Modeling of Railroad Ballast Settlement. Proc., American Railway Engineering and Maintenance-of-Way Association Annual Conference, Sept. 9–12, Chicago, Ill., American Railway Engineering and Maintenance-of-Way Association, Lanham, Md., 2007.

11.

Tutumluer

, Huang

, Hashash

Y. M. A.

, and Ghaboussi

AREMA Gradations Affecting Ballast Performance Using Discrete Element Modeling (DEM) Approach. Proc., American Railway Engineering and Maintenance-of-Way Association Annual Conference, Sept. 20–23, Chicago, Ill., American Railway Engineering and Maintenance-of-Way Association, Lanham, Md., 2009.

12.

Tutumluer

, Huang

, Hashash

Y. M. A.

, and Ghaboussi

Laboratory Characterization of Coal Dust Fouled Ballast Behavior. Proc., American Railway Engineering and Maintenance-of-Way Association Annual Conference, Sept. 21–23, Salt Lake City, Utah, American Railway Engineering and Maintenance-of-Way Association, Lanham, Md., 2008.

13.

Tutumluer

, Qian

, Hashash

Y. M. A.

, Ghaboussi

, and David

D. D.

Field Validated Discrete Element Model for Railroad Ballast. Proc., American Railway Engineering and Maintenance-of-Way Association Annual Conference, Sept. 18–21, Minneapolis, Minn., American Railway Engineering and Maintenance-of-Way Association, Lanham, Md., 2011.

14.

Lee

S. J.

, Hashash

Y. M. A.

, and Nezami

E. G.

Simulation of Triaxial Compression Test with Polyhedral Discrete Elements. Computers and Geotechnics, Vol. 43, June 2012, pp. 92–100.

15.

Garg

, and Thompson

M. R.

Triaxial Characterization of Minnesota Road Research Project Granular Materials. In Transportation Research Record 1577, TRB, National Research Council, Washington, D.C., 1997, pp. 27–36.

16.

Zhao

, Nezami

E. G.

, Hashash

Y. M. A.

, and Ghaboussi

Three-Dimensional Discrete Element Simulation for Granular Materials. Engineering Computations, Vol. 23, No. 7, 2006, pp. 749–770.

17.

Markauskas

, and Kacianauskas

Compacting of Particles for Biaxial Compression Test by the Discrete Element Method. Journal of Civil Engineering and Management, Vol. 12, No. 2, 2006, pp. 153–161.

18.

Iwashita

, and Oda

Micro-deformation Mechanism of Shear Banding Process Based on Modified Distinct Element Method. Powder Technology, Vol. 109, Nos. 1-3, 2000, pp. 192–205.

19.

Bardet

J. P.

Observations on the Effects of Particle Rotations on the Failure of Idealized Granular Materials. Mechanics of Materials, Vol. 18, No. 2, 1994, pp. 159–182.

20.

Wang

, and Tonon

Modeling Triaxial Test on Intact Rock Using Discrete Element Method with Membrane Boundary. Journal of Engineering Mechanics, Vol. 135, No. 9, 2009, pp. 1029–1037.