Abstract
Antonissen, S.B. and B.J.C. Goorden, Influence of ESD on neighbouring hull outfitting (3,4) 197–210
Cales, T.A.J., see Voermans, A.A.M. (3,4) 227–253
Cassez, A., see Paboeuf, S. (3,4) 291–314
Cecchini, A., D. Serrano and F. Just-Agosto, A novel approach for fatigue life prediction of local hull structures subjected to slamming loads (1,2) 41– 58
Coache, S. and M. Meis Fernández, ESD design for a validation bulk carrier (3,4) 211–226
Dong, Z.-r. and Y. Lin, A particle swarm optimization based approach for ship pipe route design (1,2) 59– 84
Gatchell, S., see Xing-Kaeding, Y. (3,4) 137–168
Goorden, B.J.C., see Antonissen, S.B. (3,4) 197–210
Hasselaar, T.W.F. and Y. Xing-Kaeding, Evaluation of an energy saving device via validation speed/power trials and full scale CFD investigation (3,4) 169–195
Hübler, M., D. Narayanan and M. Müller, Efficient retrofitting of vessels by using simulation tools and reverse engineering technologies (3,4) 109–136
Just-Agosto, F., see Cecchini, A. (1,2) 41– 58
Kumar, S., V. Nagarajan and O.P. Sha, Measurement of flow characteristics in propeller slipstream of a twin propeller twin rudder model ship (1,2) 1– 40
Lin, Y., see Dong, Z.-r. (1,2) 59– 84
Meis Fernández, M., see Coache, S. (3,4) 211–226
Müller, M., see Hübler, M. (3,4) 109–136
Nagarajan, V., see Kumar, S. (1,2) 1– 40
Narayanan, D., see Hübler, M. (3,4) 109–136
Paboeuf, S. and A. Cassez, ESD structural issue – UPstream device (3,4) 291–314
Prins, H., Introduction (3,4) 85– 86
Schuiling, B. and T. van Terwisga, Hydrodynamic working principles of Energy Saving Devices in ship propulsion systems (3,4) 255–290
Serrano, D., see Cecchini, A. (1,2) 41– 58
Sha, O.P., see Kumar, S. (1,2) 1– 40
Streckwall, H. and Y. Xing-Kaeding, On the working principle of pre-swirl stators and on their application benefit and design targets (3,4) 87–107
Streckwall, H., see Xing-Kaeding, Y. (3,4) 137–168
van Terwisga, T., see Schuiling, B. (3,4) 255–290
Voermans, A.A.M. and T.A.J. Cales, Early assessment of ESD benefit (3,4) 227–253
Xing-Kaeding, Y., H. Streckwall and S. Gatchell, ESD design and analysis for a validation bulk carrier (3,4) 137–168
Xing-Kaeding, Y., see Hasselaar, T.W.F. (3,4) 169–195
Xing-Kaeding, Y., see Streckwall, H. (3,4) 87–107