Assessment of polluted region using an integrated weighting approach and fuzzy VIKOR method

Abstract

Air pollution exerts a profound impact on both public health and the natural environment. In India, festivals like Diwali also contaminate the air by releasing pollutants into the atmosphere. It is essential to identify the most polluted region by estimating these pollutants. Since air quality assessment involves multiple air pollutants, there may be inherent uncertainty associated with data. This study employs a fuzzy Multi Attribute Decision Making (MADM) framework fuzzy Analytical Hierarchy Process-Entropy-fuzzy VlseKriterijumska Optimizacija I Kompromisno Resenje (FAHP-Entropy-FVIKOR) to model the impact of air pollution as a decision-making problem to address the uncertainty and assess the air quality during the Diwali festival from 2019 to 2021 in Tamil Nadu, India. An integrated weighting approach is utilised to determine the weights of the air pollutants using a fuzzy Analytical Hierarchy Process and Entropy methods. Mainly, the fuzzy VIKOR approach is employed to rank the polluted regions. The validation of the proposed model is established through a comparative analysis using Spearman’s rank correlation with two other existing fuzzy MADM methods. Furthermore, a sensitivity analysis is conducted to evaluate the influence of priority weights and the interdependence of pollutants in determining regional rankings. The results conclude that a strong positive correlation is attained between the proposed and existing methods and the highest levels of air pollution during the festival period are observed in Gandhi Nagar (2019), Rayapuram (2020), T. Nagar, Sowcarpet and Triplicane (2021) in their respective years. These findings substantiate the consistency and effectiveness of the proposed approach.

Keywords

Air pollution entropy fuzzy MADM fuzzy VIKOR fuzzy AHP

1 Introduction

Air pollution is a major global issue, particularly significant in India, where it adversely affects public health and the natural ecosystem. This problem has worsened due to rapid industrialisation, vehicular emissions, burning of agricultural waste, and poor waste management practices [20]. These sources release various pollutants that cause cancer [34], neurological damage [14], DNA damage [27], and immune and respiratory system diseases [10]. Moreover, it can lead to acid rain, harm crops, and adversely affect wildlife [21]. In India, festivals like Bhogi and Diwali significantly contribute to environmental contamination. This study focuses on Diwali, also known as the "Festival of Lights", a highly significant and widely observed event across the country. This festival occurs every year in October or November, signifying the victory of light over darkness and good over evil [6]. During Diwali, celebrants illuminate their homes, temples, and workspaces with oil lamps, candles, lanterns, and firecrackers to create a joyous atmosphere commemorating the occasion. However, the tradition of lighting firecrackers increases air pollutants like sulphur dioxide, nitrogen oxides, particulate matter and other pollutants [29].

The government has implemented measures to alleviate air pollution and identify severely affected regions. In 2015, the Indian government introduced the Air Quality Index (AQI) to prioritise and identify sources of air pollution and areas of utmost concern [4]. Additionally, researchers worldwide have employed numerous mathematical methods to consolidate multiple air pollutants into a single value, providing a concise depiction of air quality. Lin et al. [18] proposed a new multi-pollutant weighted comprehensive air quality assessment method using relative entropy and improved TOPSIS. Ozkaya and Erdin [24] presented the situation of 30 countries and compared them in forest and air quality indicators using the TOPSIS and VIKOR methods. Xu and Chernikov [38] employed an integrated approach called EM-TOPSIS-PROMETHEE for air quality assessment. Zeydan and Pekkaya [40] employed the grey relational analysis method to examine the air pollution index.

Considering that air quality comprises measurements of multiple parameters, the gathered data can have inherent uncertainty. This may not be adequately addressed in traditional calculations. Considering these uncertainties, numerous studies have adopted diverse approaches to evaluate air quality. Kumaravel and Vallinayagam [15] proposed a fuzzy logic controller using triangular membership functions to predict Chennai’s AQI. Dionova et al. [8] introduced an indoor air quality monitoring and controlling system based on a fuzzy logic controller using triangular and trapezoidal membership functions. Chitnis et al. [7] utilised a fuzzy MADM approach to assess the air quality employing six air pollutants in the Vapi area, Gujarat. Suresh et al. [32] analysed the air quality during the covid pandemic using the fuzzy MADM model for three cities in India.

The literature indicates that numerous studies have recognised air quality assessment as a significant fuzzy MADM problem due to its reliance on multiple quality indicators. Fuzzy MADM is an extended approach of MADM by incorporating fuzzy logic into its assessment. Its primary advantage is its ability to integrate multiple attributes in the decision-making process, efficiently manage uncertain data, and provide a more comprehensive solution based on the preference information provided by a single or group of decision makers [17 , 42]. Fuzzy MADM encompasses various methods, including the fuzzy AHP, fuzzy TOPSIS, fuzzy PROMETHEE, fuzzy VIKOR, fuzzy ELECTRE, fuzzy CODAS and fuzzy WASPAS among others. These methodologies are applied in various fields involving uncertainties [13].

Akram et al. [1] have proposed a method based on fuzzy ELECTRE IV to address the water supply problem in Iran’s Kermanshah province. The primary objective of the approach is to determine an optimal site for the Kandoleh dam. Issa et al. [12] have applied fuzzy AHP and TOPSIS techniques to prioritise deep excavation support systems. Pamucar et al. [25] have presented an integrated fuzzy MACBETH-D-WASPAS model, offering a solution to the problems of lithium-ion battery management. Phan et al. [26] employed fuzzy VIKOR approach to prioritize the critical barriers to supply chain resilience in Vietnamese small and medium-size enterprises. Hosseini et al. [11] introduced a hybrid decision-making approach based on fuzzy DEMETEL and fuzzy VIKOR methodologies for the purpose of prioritizing action plans as a recovery solution for ecotourism centers in the midst of the COVID-19 outbreak. Sharafi et al. [30] have introduced a novel hybrid fuzzy MADM approach, combining data envelopment analysis with the fuzzy CODAS method for selecting a green supplier. Tushar et al. [36] proposed an integrated framework combining fuzzy AHP and fuzzy PROMETHEE II to tackle the issue of circular supplier selection in the construction industries.

The motivation behind this paper is as follows:

Fuzzy Multi-Attribute Decision Making techniques find extensive application across diverse fields. Their adaptation to air quality assessment reveals specific limitations in the systematic data preparation process for effectively addressing the inherent uncertainties associated with air quality evaluation.

Converting precise numerical data into fuzzy numbers is particularly crucial, given the significance of air quality assessment in safeguarding public health and the environment.

The main contribution of this study is as follows:

To address the gap in the limited application of fuzzy Multi-Attribute Decision Making methods within the field of air quality assessment, the percentage error method is introduced in this paper to construct the triangular fuzzy numbers, which is highly effective in capturing and handling uncertainties inherent in air pollution datasets.

The proposed hybrid methodology integrates the fuzzy Analytical Hierarchy Process and Entropy weighting techniques to ascertain the relative significance of each parameter. Furthermore, the fuzzy VIKOR approach categorises geographical areas and pinpoints the most polluted region.

This paper outlines these methods and their application in the context of air quality assessment, aiming to contribute to the refinement of methodologies for addressing air quality challenges.

The paper’s structure is as follows: the preliminaries section provides essential definitions, and the study area and data collection section outline the considered alternatives, attributes, and statistical data. The methodology section details the algorithms of the employed methods. The findings are summarized in the results and discussion section and the article concludes in the final section.

2 Preliminaries

The Preliminaries section of the paper encompasses primary definitions and essential concepts necessary for the study.

2.1 Fuzzy set theory [43]

Lotfi Zadeh [39] introduced the fuzzy set theory, a mathematical theory that aims to capture and represent human cognitive processes imprecise or vague nature. Let X be the universe of discourse, X = {x₁, x₂, …, x_n}, a fuzzy set $\tilde{A}$ of X is characterised by a membership function $μ_{\tilde{A}} (x)$ , which associates with each element x in X, a real number in the interval [0,1]. The function value $μ_{\tilde{A}} (x)$ is termed the grade of membership of x in $\tilde{A}$ .

2.2 Fuzzy numbers [43]

A fuzzy number $\tilde{A}$ is a convex normalised fuzzy set $\tilde{A}$ of the real line R such that

there exists exactly one x₀ in R with $μ_{\tilde{A}} (x_{0}) = 1$ .

$μ_{\tilde{A}} (x)$ is piecewise continuous.

In fuzzy set theory, triangular and trapezoidal fuzzy numbers are two commonly used fuzzy numbers. These fuzzy numbers are widely utilised both in theoretical studies and practical applications. While both triangular and trapezoidal fuzzy numbers have their uses, triangular fuzzy numbers are often considered more convenient in application due to their simplicity in the calculation.

2.3 Triangular fuzzy number [5]

Let $\tilde{A} = (c_{1}, c_{2}, c_{3})$ is a triangular fuzzy number with a membership function. $μ_{\tilde{A}} (x) = {\begin{matrix} \frac{x - c_{1}}{c_{2} - c_{1}}, & x ϵ [c_{1}, c_{2}] \\ \frac{c_{3} - x}{c_{3} - c_{2}}, & x ϵ [c_{2}, c_{3}] \\ 0, & x < c_{1} and x > c_{3} \end{matrix}$ where the c₁, c₂ and c₃ are the lower limit, middle limit and upper limit of the triangular fuzzy number $\tilde{A}$ , respectively.

2.4 Percentage error method [16]

The process of fuzzy data transformation entails constructing a triangular fuzzy number through the percentage error method. Based upon a 95% confidence interval, solely the distribution exhibiting a 5% or less dispersion is considered the optimal choice. The triangular fuzzy number generated via the percentage error method can be acquired from, $\tilde{A} = (a - (a \times p) a, a + (a \times p))$ where $\tilde{A}$ is the transformed triangular fuzzy number of the crisp data ‘a’ using the spread ‘p’ (p= 0.01, 0.03, 0.05).

2.5 Fuzzy operation [22]

The mathematical operations on triangular fuzzy numbers $\tilde{A} = (p, q, r)$ , $\tilde{B} = (l, m, u)$ and a constant ‘t’ is defined as follows:

$\begin{matrix} [t] \sum_{i = 1}^{p} \oplus {\tilde{A}}_{i} & = (\sum_{i = 1}^{p} p_{i}, \sum_{i = 1}^{p} q_{i}, \sum_{i = 1}^{p} r_{i}) \end{matrix}$

$\begin{matrix} [t] \tilde{A} \oplus t & = (p + t, q + t, r + t) \end{matrix}$

$\begin{matrix} [t] \tilde{A} ⊖ \tilde{B} & = (p - u, q - m, r - l) \end{matrix}$

$\begin{matrix} [t] t \times \tilde{A} & = (t \times p, t \times q, t \times r), for t \geq 0 \end{matrix}$

$\begin{matrix} [t] \tilde{A} \times \tilde{B} & = (p \times l, q \times m, r \times u) \end{matrix}$

$\begin{matrix} [t] \frac{\tilde{A}}{t} & = (\frac{p}{t}, \frac{q}{t}, \frac{r}{r}), for t \geq 0 \end{matrix}$

$\begin{matrix} [t] {MAX}_{i} {\tilde{A}}_{i} & = (max_{i} p_{i}, max_{i} q_{i}, max_{i} r_{i}) \end{matrix}$

$\begin{matrix} [t] {MIN}_{i} {\tilde{A}}_{i} & = (min_{i} p_{i}, min_{i} q_{i}, min_{i} r_{i}) \end{matrix}$

2.6 Defuzzification [2]

A vital step in fuzzy modelling and fuzzy multi-attribute decision making is the procedure of defuzzification. Various techniques for defuzzification are available, including the mean of maxima, the centre of area and α-cut. The fuzzy numbers are defuzzified in this study using the centre of area method. For the triangular fuzzy number, $\tilde{A} = (c_{1}, c_{2}, c_{3})$ , the defuzzified value is $A = \frac{c_{1} + c_{2} + c_{3}}{3}$

3 Study area and data collection

This research intends to estimate the air quality and determination of the most polluted area during the Diwali festival, specifically in the 26 regions of Tamil Nadu, India, shown in Table 1, and the ambient air pollutants sulphur dioxide (SO₂), nitrogen dioxide (NO₂), and particulate matter (PM₁₀ microns ≤10 μg ∖ m³ and PM_2.5 microns ≤2.5 μg ∖ m³) have been selected as the attribute to evaluate the air quality using the proposed model.

Table 1
The considered areas of Tamil Nadu during the Diwali festival

State District Regions Abbreviation

Tamil Nadu Chennai Besant Nagar BSN

T.Nagar TNR

Nungambakkam NGM

Triplicane TRP

Sowcarpet SCT

Coimbatore Gowndampalayam GDM

Collectorate Office COO

Cuddalore Imperial Road IMR

Pudupalayam PDP

Madurai Thirunagar THN

Birla Vishram BVM

Salem Sri Saradha Balamandhir School SBC

Siva Tower SVT

Tirunelveli Pettai PET

Vannarpettai VPT

Trichy Ramalinga Nagar RMN

Gandhi Market GNM

Vellore Gandhi Nagar GNN

Sidco Industrial Estate SIE

Dindigul Rajagopal Iyangar RGI

Hosur ESI Hospital ESI

Inel Transit House ITH

Thoothukudi Raju Nagar RNR

Cellisini Colony CCY

Tiruppur Kumaran Complex KMC

Rayapuram RPM

State	District	Regions	Abbreviation
Tamil Nadu	Chennai	Besant Nagar	BSN
		T.Nagar	TNR
		Nungambakkam	NGM
		Triplicane	TRP
		Sowcarpet	SCT
	Coimbatore	Gowndampalayam	GDM
		Collectorate Office	COO
	Cuddalore	Imperial Road	IMR
		Pudupalayam	PDP
	Madurai	Thirunagar	THN
		Birla Vishram	BVM
	Salem	Sri Saradha Balamandhir School	SBC
		Siva Tower	SVT
	Tirunelveli	Pettai	PET
		Vannarpettai	VPT
	Trichy	Ramalinga Nagar	RMN
		Gandhi Market	GNM
	Vellore	Gandhi Nagar	GNN
		Sidco Industrial Estate	SIE
	Dindigul	Rajagopal Iyangar	RGI
	Hosur	ESI Hospital	ESI
		Inel Transit House	ITH
	Thoothukudi	Raju Nagar	RNR
		Cellisini Colony	CCY
	Tiruppur	Kumaran Complex	KMC
		Rayapuram	RPM

The concentration of these pollutants during the Diwali festival from 2019 to 2021 was procured from the Tamil Nadu Pollution Control Board (TNPCB) in Chennai [33]. The data distribution for the four contaminants is presented in Fig. 1.

Fig. 1

Data distribution of each pollutant.

Descriptive statistics of the pollutant studied in the community of Tamil Nadu, India have been carried out. Table 2 shows a statistical summary of these data, including measures of central tendency and variability in the form.

Table 2

Summary statistics of the air pollutants concentrations

Year	2019				2020				2021
Pollutants	SO ₂	NO ₂	PM ₁₀	PM _2.5	SO ₂	NO ₂	PM ₁₀	PM _2.5	SO ₂	NO ₂	PM ₁₀	PM _2.5
Count	15	15	15	15	15	15	15	15	15	15	15	15
Average (μg/m³)	14.9	19.8	168	61.9	12.5	19.9	205	101.1	12.9	21.1	146.9	81.7
Standard dev. (μg/m³)	2.99	5.57	32.99	25.51	2.29	3.71	36.12	35.33	1.99	4.91	36.81	13.37
Coeff. of variation %	20	28	20	41	18	19	18	35	16	23	25	16
Minimum (μg/m³)	12	12	126	20	9	16	146	42	9	14	103	52
Maximum (μg/m³)	24	31	249	109	15	28	274	184	16	28	256	102
Range (μg/m³)	12	19	123	89	6	12	128	142	7	14	153	50
Stnd. skewness	2.30	0.44	1.04	0.27	-0.30	0.85	0.49	0.64	-0.41	-0.01	2.01	-0.45
Stnd. kurtosis	6.04	-0.85	1.19	-0.53	-1.58	-0.26	-0.52	1.30	-0.57	-1.58	5.18	0.62

The maximum concentration values of SO₂ and NO₂ in 2019, 2020, and 2021 were within the permissible limits, with values ranging from 36 μg ∖ m³ to 49 μg ∖ m³. However, all three years exceeded the average daily limit of 100 μg ∖ m³ for PM₁₀, with maximum values ranging from 226 μg ∖ m³ to 283 μg ∖ m³. Similarly, all three years exceeded the average limit of 60 μg ∖ m³ for PM_2.5, with maximum values ranging from 66 μg ∖ m³ to 231 μg ∖ m³. It is worth noting that large standard deviations were found for PM₁₀ in all years, indicating significant variations in the concentration levels within the studied regions. Additionally, the coefficient of variation for PM_2.5 was higher in 2019 and 2021, suggesting more variability in the concentration levels of this pollutant during those years. Furthermore, the skewness values indicate the distribution characteristics of the contaminants. PM_2.5 exhibited higher skewness values in 2019 and 2021, indicating a skewed distribution. PM₁₀ showed higher skewness in 2020. These observations highlight the elevated levels of particulate matter, specifically PM₁₀ and PM_2.5, during the Diwali festival period. The results emphasise the need for effective measures to reduce and control particulate matter pollution, as it poses a significant health risk to the population.

4 Methodology

We propose a hybrid approach that combines the FAHP and Entropy weighting techniques to prioritise the attributes (parameters) in the decision-making process. Then, we use the FVIKOR method to evaluate and rank the alternatives (areas) and to identify the most polluted region. The flowchart in Fig. 2 presents the methodology of the proposed FAHP-Entropy-FVIKOR model.

Fig. 2

FAHP-Entropy-FVIKOR Model.

4.1 Weighting methods

In real-world problems, the information regarding attribute weights may be either unknown or only partially known, leading to an incomplete problem [19]. In this study, the weights of the attributes are determined using standard weighting approaches, namely the FAHP and Entropy methods. These approaches provide systematic ways to assign attribute weights based on expert opinion and alternative data.

4.2 FAHP

The FAHP is an extension of the Analytic Hierarchy Process (AHP) developed by Saaty. AHP is widely used in various multi attribute decision making problems [28]. However, AHP does not inherently account for vagueness in personal judgments. To address this limitation, the FAHP incorporates fuzzy logic to handle ambiguity in decision-making. Buckley’s method [3] is utilised to determine the relative importance weights for attributes. The procedure follows these steps:

Step 1: A pairwise comparison matrix is formed based on the relative significance of each attribute using the linguistic terms shown in Table 3.

Table 3
Linguistic expressions and their corresponding triangular fuzzy values

Definition Fuzzy triangular scale

Equal importance (1,1,1)

Moderate importance (2,3,4)

Strong importance (4,5,6)

Very strong importance (6,7,8)

Extreme importance (9,9,9)

Intermediate values (1,2,3)

(3,4,5)

(5,6,7)

(7,8,9)

Definition	Fuzzy triangular scale
Equal importance	(1,1,1)
Moderate importance	(2,3,4)
Strong importance	(4,5,6)
Very strong importance	(6,7,8)
Extreme importance	(9,9,9)
Intermediate values	(1,2,3)
	(3,4,5)
	(5,6,7)
	(7,8,9)

The pairwise comparison matrix is presented in Equation (1), where $\tilde{t_{ij}}$ represents the preference of i^th attribute over the j^th attribute using fuzzy triangular numbers. $\tilde{A} = [\begin{matrix} \tilde{t_{11}} & \dots & \tilde{t_{1 k}} \\ ⋮ & ⋮ & ⋮ \\ \tilde{t_{p 1}} & \dots & \tilde{t_{pk}} \end{matrix}]$ (1)Step 2: The geometric mean of the fuzzy comparison values for each attribute is computed according to Equation (2). $\tilde{y_{i}} = {(\prod_{j = 1}^{k} \tilde{t_{ij}})}^{\frac{1}{p}}, i = 1, 2, . . p$ (2)Step 3: The fuzzy weights of each attribute are calculated using the following equation

$\begin{matrix} \tilde{u_{i}} & = \tilde{y_{i}} \otimes {(\tilde{y_{i}} oplus \tilde{y_{2}} \oplus \dots oplus \tilde{y_{n}})}^{- 1} \\ \tilde{u_{i}} & = ({aw}_{i}, {bw}_{i}, {cw}_{i}) \end{matrix}$ (3)Step 4: Obtain c_i from $\tilde{u_{i}}$ using the centre of area defuzzification formula discussed in section 2.5. Step 5: Normalise the c_i values using the equation $α_{i} = \frac{c_{i}}{\sum_{i = 1}^{p} c_{i}}$ (4)

4.3 Entropy

The Entropy method, proposed by Shannon [31], is utilised as an objective weighting approach to determine the relative importance of different attributes. The algorithm for the Entropy method is as follows:

Step 1: Construct the crisp decision matrix B = [b_ij] _p×k consists of p alternatives and k attributes using the initial data as presented in Equation (5) $B = [\begin{matrix} b_{11} & b_{12} & \begin{matrix} \dots & b_{1 k} \end{matrix} \\ b_{12} & b_{22} & \begin{matrix} \dots & b_{2 k} \end{matrix} \\ \begin{matrix} ⋮ \\ b_{p 1} \end{matrix} & \begin{matrix} ⋮ \\ b_{p 2} \end{matrix} & \begin{matrix} \begin{matrix} ⋮ \\ \dots \end{matrix} & \begin{matrix} ⋮ \\ b_{pk} \end{matrix} \end{matrix} \end{matrix}]$ (5) Here, b_ij (1 ≤ i ≤ p, 1 ≤ j ≤ k) indicates the performance ratings of i^th alternative to the j^th attribute for the initial data shown in Fig. 1.

Step 2: Using the following formula, normalise the decision matrix by substituting each b_ij by n_ij. $n_{ij} = \frac{b_{ij}}{\sum_{i = 1}^{p} b_{ij}}$ (6)Step 3: Calculate the entropy value e_j of j^th attribute by $e_{j} = - h \sum_{i = 1}^{p} n_{ij} ln n_{ij} (h = \frac{1}{ln p}, 1 \leq j \leq k)$ (7)Step 4: Determine the degree of diversification of the j^th attribute $v_{j} = 1 - e_{j} (1 \leq j \leq k)$ (8)Step 5: Calculate the weight of the attributes using $β_{j} = \frac{v_{j}}{\sum_{j = 1}^{k} v_{j}} (1 \leq j \leq k)$ (9)

4.4 Comprehensive weight

In this study, the weight preference factor φ is employed to combine the objective and subjective weights and generate the comprehensive weight w_j of the j^th attribute. $w_{j} = φ . α_{j} + (1 - φ) . β_{j}$ (10) The value of φ ranges from 0 to 1 and determines the relative significance of objective and subjective weights.

4.5 Fuzzy VIKOR

VIKOR is a robust technique to address MADM problems involving diverse alternatives and conflicting attributes. To address the challenges of uncertainty and inconsistency, FVIKOR was introduced [23]. The algorithm for FVIKOR is outlined as follows:

Step 1: Construct a fuzzy decision matrix $A = {[\tilde{r_{ij}}]}_{p \times k}$ consists of p alternatives and k attributes as presented in equation (11) $A = [\begin{matrix} \tilde{r_{11}} & \tilde{r_{12}} & \begin{matrix} \dots & \tilde{r_{1 k}} \end{matrix} \\ \tilde{r_{22}} & \tilde{r_{22}} & \begin{matrix} \dots & \tilde{r_{2 k}} \end{matrix} \\ \begin{matrix} ⋮ \\ \tilde{r_{p 1}} \end{matrix} & \begin{matrix} ⋮ \\ \tilde{r_{p 2}} \end{matrix} & \begin{matrix} \begin{matrix} ⋮ \\ \dots \end{matrix} & \begin{matrix} ⋮ \\ \tilde{r_{pk}} \end{matrix} \end{matrix} \end{matrix}]$ (11) Here, $\tilde{r_{ij}} = (a_{l}, a_{m}, a_{u}) (1 \leq i \leq p, 1 \leq j \leq k)$ indicates the performance ratings of i^th alternative to the j^th attributes

Step 2: Determine the ideal fuzzy value $\tilde{f_{j}^{+}}$ = $(l_{j}^{+}, m_{j}^{+}, u_{j}^{+})$ and anti-ideal fuzzy value $\tilde{f_{j}^{-}}$ = $(l_{j}^{-}, m_{j}^{-}, u_{j}^{-})$ among the attributes using the following formula for postive and negative attributes respectively. $\tilde{f_{j}^{+}} = MAX \tilde{r_{ij}}, \tilde{f_{j}^{-}} = MIN \tilde{r_{ij}}$ (12) $\tilde{f_{j}^{+}} = MIN \tilde{r_{ij}}, \tilde{f_{j}^{-}} = MAX \tilde{r_{ij}}$ (13)Step 3: Calculate the fuzzy distance between $\tilde{r_{ij}}$ and $\tilde{f_{j}^{+}}$ $(or \tilde{f_{j}^{-}})$ using the equation $\tilde{k_{ij}} = {\begin{matrix} \frac{(\tilde{f_{j}^{+}} ⊖ \tilde{r_{ij}})}{(u_{j}^{+} - l_{j}^{-})} : for positive criteria \\ \frac{(\tilde{r_{ij}} ⊖ \tilde{f_{j}^{+}})}{(u_{j}^{-} - l_{j}^{+})} : for negative criteria \end{matrix}$ (14)Step 4: Calculate the deviation of each alternative from the ideal and anti-ideal values using the respective equations $\tilde{S_{i}} = (s_{i}^{l}, s_{i}^{m}, s_{i}^{u}) = \sum_{j = 1}^{k} (\tilde{w_{j}} \otimes \tilde{k_{ij}})$ (15) $\tilde{R_{i}} = (r_{i}^{l}, r_{i}^{m}, r_{i}^{u}) = MAX (\tilde{w_{j}} \otimes \tilde{k_{ij}})$ (16) The value of $\tilde{Q_{i}} = (Q_{i}^{l}, Q_{i}^{m}, Q_{i}^{u})$ is calculated using the equation $\tilde{Q_{i}} = v [\frac{\tilde{S_{i}} ⊖ MIN \tilde{S_{i}}}{MAX \tilde{S_{i}^{u}} - S^{+ l}}] \oplus (1 - v) [\frac{\tilde{R_{i}} ⊖ MIN \tilde{R_{i}}}{MAX \tilde{R_{i}^{u}} - R^{+ l}}]$ (17) v consists of the total number of attributes equating to $(\frac{k + 1}{2 k})$ .

After gaining $\tilde{S_{i}}, \tilde{R_{i}}, and \tilde{Q_{i}}$ , their triangular values should be converted into crisp numbers using the centre of area defuzzification formula.

Step 5: The computed crisp scores are named as S_i, R_i and Q_i. The values of Q_i are ranked in the ascending order. The alternative with the lowest value of Q_i is considered the best-ranked alternative.

Step 6: Propose a compromise solution; the alternative A¹, which is the best ranked by the measure Q (minimum) if the following two conditions are satisfied:

C1: Acceptable advantage: $Q (A^{2}) - Q (A^{1}) \geq DQ$ where A² is the second-ranked alternative according to Q and $DQ = \frac{1}{(p - 1)}$ (p is the number of alternatives).

C2: Acceptable stability in decision-making:

The alternative A¹ must also be the best ranked according to S or/and R.

If one of the conditions is not satisfied, then a set of compromise solutions is proposed, which consists of the following:

The alternatives A¹ and A² if only the condition 2 is not satisfied.

The set of alternatives A¹, A², … A^p if condition 1 is false; A^p is determined by Q (A^p) - Q (A¹) < DQ.

5 Results and discussion

To identify the most polluted region in Tamil Nadu based on air pollutant concentrations, a FAHP-Entropy-FVIKOR model was implemented. The fuzzy Analytic Hierarchy Process was utilised to determine the subjective weights of the attributes through pairwise comparisons. The resulting weights are α_j = [0.120 0.056 0.267 0.557]. Based on the Entropy methodology, the normalisation process, entropy value and the degree of diversification are determined using Equations (6)-(8). The relationship between the entropy value and the entropy weight is the maximum entropy value attains minimum entropy weight and minimum entropy value reaches maximum entropy weight. The objective weight β_j of each attribute obtained using Equation (9), shown in Table 4.

Table 4
Obtained entropy weights of the attributes

Year β₁ β₂ β₃ β₄

2019 0.167 0.117 0.206 0.450

2020 0.266 0.201 0.221 0.312

2021 0.206 0.108 0.181 0.506

Year	β₁	β₂	β₃	β₄
2019	0.167	0.117	0.206	0.450
2020	0.266	0.201	0.221	0.312
2021	0.206	0.108	0.181	0.506

A comprehensive weighting approach is adopted to derive more moderate weights, incorporating the FAHP and Entropy methods. The final weights w_j as calculated by Equation (10), are presented in Table 5 under φ = 0.5.

Table 5

Final weights of the attributes

Year	w ₁	w ₂	w ₃	w ₄
2019	0.114	0.117	0.236	0.503
2020	0.193	0.129	0.244	0.434
2021	0.163	0.082	0.224	0.531

In the next step, the crisp data is transformed to triangular fuzzy number using the percentage error method. Using the transformed fuzzy data the fuzzy best $\tilde{f_{j}^{+}}$ and fuzzy worst $\tilde{f_{j}^{-}}$ values of all attributes are determined by Equations (12) and (13) are represented in Tables 6 and 7.

Table 6

Fuzzy best and worst value of each attribute

Fuzzy best values
Year/Attributes	C1	C2	C3	C4
2019	(38.95,41,43.05)	(45.60,48,50.40)	(252.70,266,279.30)	(156.75,165,173.25)
2020	(34.20,36,37.80)	(46.55,49,51.45)	(214.70,226,237.30)	(62.70,66,69.30)
2021	(35.15,37,38.85)	(38,40,42)	(268.85,283,297.15)	(219.45,231,242.55)

Table 7

Fuzzy worst value of each attribute

Fuzzy worst values
Year/Attributes	C1	C2	C3	C4
2019	(7.6,8,8.4)	(4.75,5,5.25)	(42.75,45,47.25)	(10,.45,11,11.55)
2020	(8.55,9,9.45)	(9.5,10,10.5)	(46.55,49,51.45)	(11.40,12,12.60)
2021	(3.8,4,4.20)	(7.6,8,8.4)	(53.2,56,58.80)	(14.25,15,15.75)

The normalised fuzzy difference ${\tilde{k}}_{ij}$ was determined using the fuzzy best and worst values in the Equation (14). The fuzzy weighted sum $\tilde{S_{i}}$ and the fuzzy operator max $\tilde{R_{i}}$ were calculated using (15) and (16). The parameter $\tilde{Q_{i}}$ was determined involving the $\tilde{S_{i}}$ , $\tilde{R_{i}}$ , the weight strategy v and the weight of the individual regret 1 - v in the Equation (17). These fuzzy values are then defuzzified using the centre of area method to obtain the crisp values S_i, R_i and Q_i, which are ranked and presented in Table 8.

Table 8

Ranks of the FVIKOR parameters

Areas	2019				2020				2021
	S _i	R _i	Q _i	Rank	S _i	R _i	Q _i	Rank	S _i	R _i	Q _i	Rank
BSN	0.702	0.331	0.568	11	0.681	0.226	0.526	15	0.368	0.136	0.192	5
TNR	0.677	0.337	0.555	10	0.694	0.255	0.563	17	0.143	0.112	0.015	1
NGM	0.724	0.355	0.605	16	0.672	0.240	0.532	16	0.203	0.121	0.065	4
TRP	0.713	0.361	0.602	15	0.457	0.172	0.307	10	0.176	0.107	0.035	3
SCT	0.626	0.318	0.502	8	0.490	0.161	0.321	11	0.172	0.093	0.020	2
GDM	0.776	0.439	0.713	19	0.838	0.390	0.801	25	0.562	0.356	0.509	9
COO	0.851	0.476	0.799	25	0.819	0.405	0.802	26	0.558	0.333	0.487	8
IMR	0.689	0.365	0.587	13	0.410	0.174	0.274	8	0.621	0.442	0.622	12
PDP	0.694	0.371	0.596	14	0.297	0.178	0.195	3	0.655	0.449	0.651	16
THN	0.844	0.436	0.760	24	0.665	0.285	0.571	18	0.644	0.444	0.640	13
BVM	0.791	0.433	0.719	21	0.705	0.330	0.644	21	0.547	0.435	0.565	10
SBC	0.569	0.328	0.469	5	0.413	0.149	0.252	7	0.807	0.444	0.753	21
SVT	0.658	0.386	0.583	12	0.361	0.150	0.215	5	0.786	0.440	0.735	20
PET	0.889	0.463	0.816	26	0.830	0.367	0.773	23	0.878	0.502	0.851	26
VPT	0.813	0.439	0.740	22	0.835	0.367	0.777	24	0.874	0.498	0.844	25
RMN	0.598	0.306	0.471	6	0.609	0.188	0.435	13	0.882	0.488	0.842	24
GNM	0.625	0.318	0.502	7	0.474	0.153	0.301	9	0.823	0.470	0.785	23
GNN	0.188	0.105	0.004	1	0.587	0.232	0.462	14	0.726	0.437	0.691	17
SIE	0.597	0.368	0.523	9	0.679	0.292	0.589	19	0.706	0.402	0.648	15
RGI	0.485	0.287	0.374	4	0.346	0.143	0.197	4	0.629	0.426	0.614	11
ESI	0.829	0.439	0.752	23	0.785	0.330	0.704	22	0.807	0.481	0.784	22
ITH	0.691	0.386	0.607	17	0.362	0.162	0.228	6	0.659	0.440	0.647	14
RNR	0.318	0.122	0.113	3	0.724	0.315	0.644	20	0.485	0.178	0.308	7
CCY	0.271	0.130	0.085	2	0.500	0.165	0.332	12	0.370	0.154	0.208	6
KMC	0.816	0.408	0.716	20	0.347	0.132	0.187	2	0.706	0.495	0.726	19
RPM	0.685	0.420	0.632	18	0.173	0.073	0.000	1	0.749	0.444	0.713	18

Upon verification of the conditions, it can be concluded that the alternatives met the requirements for acceptable advantage and stability in 2019 and 2020. As a result, Gandhi Nagar and Rayapuram were ranked as the most contaminated regions in their respective years. However, in 2021, although the acceptable stability condition was met, the acceptable advantage condition was not. Consequently, among the alternatives, T. Nagar, Sowcarpet, and Triplicane were identified as the most polluted areas. Pettai was the least contaminated area in 2019 and 2021, while Collectorate Office was the least polluted area in 2020. The results showed that the rankings of these twenty-six areas slightly differed from the TNPCB results, which were based on the breakpoint concentration of pollutants and obtained through the maximum aggregation operator. The results of TNPCB is illustrated in Fig. 3.

Fig. 3

TNPCB Ranking.

According to the TNPCB results, Cellisini Colony, Rayapuram, and T. Nagar were the most polluted areas in 2019, 2020 and 2021, respectively. On the other hand, Thirunagar, ESI Hospital, and Ramalinga Nagar were found to be the least contaminated areas in the same respective years. It is observed that the results obtained from the FAHP-Entropy-FVIKOR method align with the TNPCB findings regarding the most polluted area.

5.1 Comparison with fuzzy MADM methods

In order to validate the proposed methodology, this study compares the FVIKOR approach with two established fuzzy MADM techniques: fuzzy Combinative Distance based Assessment (FCODAS) [9] and fuzzy Weighted Aggregated Sum Product Assessment (FWASPAS) [35]. All methods are applied to the same dataset to rank the areas and identify the most polluted area in Tamil Nadu. The results of these ranking methods are presented in Table 9.

Table 9
Ranking of FCODAS and FWASPAS

Year 2019 2020 2021

Areas \ Methods FCODAS FWASPAS FCODAS FWASPAS FCODAS FWASPAS

BSN 9 11 15 15 6 6

TNR 10 9 17 17 1 1

NGM 12 12 16 16 4 4

TRP 13 13 5 6 2 2

SCT 6 6 10 12 3 3

GDM 20 21 26 26 9 9

COO 25 26 25 25 8 8

IMR 14 14 8 7 13 13

PDP 15 15 4 4 17 17

THN 23 24 18 18 15 14

BVM 21 20 21 21 11 11

SBC 8 7 11 10 21 20

SVT 16 16 12 8 19 19

PET 26 25 23 23 26 26

VPT 22 22 24 24 25 25

RMN 5 5 13 13 24 24

GNM 7 8 7 9 22 22

GNN 3 3 14 14 16 16

SIE 11 10 19 19 10 10

RGI 4 4 3 3 12 12

ESI 24 23 22 22 23 23

ITH 17 17 6 5 14 15

RNR 2 2 20 20 7 7

CCY 1 1 9 11 5 5

KMC 19 19 2 2 20 21

RPM 18 18 1 1 18 18

Year	2019	2020	2021
BSN	9	11	15	15	6	6
TNR	10	9	17	17	1	1
NGM	12	12	16	16	4	4
TRP	13	13	5	6	2	2
SCT	6	6	10	12	3	3
GDM	20	21	26	26	9	9
COO	25	26	25	25	8	8
IMR	14	14	8	7	13	13
PDP	15	15	4	4	17	17
THN	23	24	18	18	15	14
BVM	21	20	21	21	11	11
SBC	8	7	11	10	21	20
SVT	16	16	12	8	19	19
PET	26	25	23	23	26	26
VPT	22	22	24	24	25	25
RMN	5	5	13	13	24	24
GNM	7	8	7	9	22	22
GNN	3	3	14	14	16	16
SIE	11	10	19	19	10	10
RGI	4	4	3	3	12	12
ESI	24	23	22	22	23	23
ITH	17	17	6	5	14	15
RNR	2	2	20	20	7	7
CCY	1	1	9	11	5	5
KMC	19	19	2	2	20	21
RPM	18	18	1	1	18	18

According to the results obtained from Table 9, the FCODAS and FWASPAS methods resulted in Cellisini Colony, Rayapuram, and T. Nagar being among the top-ranked areas among the twenty-six regions in Tamil Nadu. In 2019, Pettai was identified as the least polluted area based on the FCODAS method, while the FWASPAS method ranked Collectorate Office as the least polluted area. Similarly, in 2020, Gowndampalayam obtained the least polluted area status according to the FCODAS and FWASPAS methods. Finally, in 2021, both methods ranked Pettai again as the least polluted area. The most polluted ranks obtained from FCODAS and FWASPAS for the years 2019-2021 are the same as the proposed method. The comparison of these ranks is presented in Fig. 4.

Fig. 4

Comparative ranks of FVIKOR with FCODAS and FWASPAS methods.

Figure 4 presents a comparison of the ranks obtained by the FVIKOR method against two alternative approaches, FCODAS and FWASPAS, to assess their performance and effectiveness in ranking various areas. The results for the years 2019 and 2021 show that the FVIKOR method precisely matched rankings in 12 areas compared to the FCODAS approach. Moreover, in 2020, the FVIKOR method achieved identical rankings in 8 specified areas when compared to FCODAS. Similarly, concerning the FWASPAS method, the FVIKOR rankings coincided with FWASPAS in 16 areas for 2019, 7 areas for 2020, and 22 areas for 2021, indicating considerable consistency across different periods. This substantial consistency in rankings highlights the potential of the FVIKOR method. It is important to note slight variations in rankings when comparing the FVIKOR method to the other two approaches. To verify the accuracy of the FVIKOR method, it is essential to perform an evaluation using appropriate statistical tools.

A statistical test called Spearman’s rank correlation test is employed to assess the correlation between the rankings obtained from the FVIKOR approach and the rankings from FCODAS and FWASPAS. Spearman’s coefficient (ρ) is calculated to determine the significance of the correlation between two or more rankings. Given two ranking datasets (A₁ and A₂), ρ is calculated using the equation. $ρ = 1 - \frac{6 \sum d_{i}^{2}}{n (n^{2} - 1)}$ (18) Here, n represents the number of alternatives in the dataset, and d² represents the squared difference between the two rankings. The resulting value of ρ indicates the relationship between the two ranking sets.

The correlation between the FVIKOR approach and the FCODAS and FWASPAS methods is determined using Equation (18). In the year 2019, Spearman’s rank correlation between the FVIKOR approach and FCODAS is 0.999, and with FWASPAS, it is 0.997. In the year 2020, the correlation with FCODAS is 0.999, and with FWASPAS, it is 0.988. In the year 2021, the correlation with FCODAS is 0.999, and with FWASPAS, it is 0.999. These values indicate a strong positive correlation between the proposed method and the other two fuzzy MADM methods.

5.2 Sensitivity analysis

In the present study, a sensitivity analysis is conducted to assess the influence of priority weights on the ranking of regions and to identify the impact of a specific air pollutant on air quality. The sensitivity analysis comprises two scenarios:

The priority weights have changed.

Reduction of pollutants

5.2.1 Scenario 1

This scenario presents the changes in the weights of the attributes and the comparison between the 2 cases:

By applying a combined FAHP-Entropy approach.

Equal weights are considered for all attributes.

Figure 5 illustrates the variation in area rankings when applying the FAHP-Entropy approach compared to the equal weight approach. It can be observed that there are significant changes in the rankings of the areas when equal weights are used across the years. In 2019, the rankings of all areas, except for Triplicane, Imperial Road, Pudupalayam, and Pettai, were altered. Similarly, in 2020, only Gandhi Market, ESI Hospital, and Rayapuram maintained their original ranks, while the ranks of other areas were modified. In 2021, Nungambakkam, Triplicane, Saradha Balamandhir School, and umaran Complex retained the same rank, but the rankings of the remaining areas were altered when employing the equal weight approach.

Fig. 5

Sensitivity analysis for scenario 1.

In scenario 1, it is emphasised that assigning appropriate weights to the pollutants is crucial when determining the most polluted region. Since air pollution consists of multiple pollutants with varying concentrations, accurately evaluating the weights of these pollutants becomes essential. This ensures that the impact of each pollutant is adequately considered in the decision-making process, leading to a more accurate identification of the most polluted region.

5.2.2 Scenario 2

The sensitivity analysis conducted in this study investigates the impact of individual air pollutants on the ranking of contaminated places. Each pollutant is removed one at a time, and the resulting changes in the ranking of the areas are observed. This analysis helps identify the pollutant that significantly influences air quality and determines how its removal affects the ranking of regions.

In this particular study, the pollutants are eliminated in the following sequence: SO₂ is eliminated first, followed by NO₂, then PM₁₀, and finally PM_2.5. The resulting changes in the ranking of areas after removing each pollutant are depicted in Fig. 6. This analysis provides valuable insights into the relative importance of different pollutants and their impact on the overall ranking of contaminated places.

Fig. 6

Sensitivity analysis for scenario 2.

In this scenario, the sensitivity analysis focuses on the impact of each pollutant on the ranking of contaminated areas. By eliminating each pollutant one by one SO₂, NO₂, PM₁₀ and PM_2.5, the changes in the ranking of limited areas are observed. It is observed that the elimination of SO₂, NO₂, PM₁₀ affects the ranks of some areas, but the removal of PM_2.5 causes a significant change in the ranks across the years.

This sensitivity analysis indicates that PM_2.5 has a substantial impact on the ranking of the most polluted areas. Therefore, to improve the air quality in these areas, it is crucial to focus on reducing the sources that emit PM_2.5. By targeting and reducing PM_2.5 emissions, significant improvements can be made in the air quality of these regions.

6 Conclusion

Using the FAHP-Entropy-FVIKOR model, this study identified the most polluted area during the Diwali festival from 2019 to 2021 in Tamil Nadu, India. Four pollutants were considered, and their weights were determined using the FAHP and Entropy methods combined. The areas are ranked using the FVIKOR method. By integrating these techniques, the study aims to provide a robust and systematic framework for air quality assessment, effectively identifying the most polluted region and prioritising necessary interventions or mitigation strategies.

The results indicated that Gandhi Nagar in Vellore and Rayapuram in Tiruppur were the most polluted in 2019 and 2020, respectively. However, due to failed conditions of acceptable advantage in 2021, T. Nagar, Sowcarpet, and Triplicane in Chennai were the most contaminated areas that year. Validation through Spearman’s rank correlation with other fuzzy MADM approaches, FCODAS and FWASPAS demonstrated consistency and strong correlation in the ranking of the proposed approach. Sensitivity analysis revealed that pollutant’s weight affects the ranks of the city and importance of specific air pollutants on overall air quality, with PM_2.5 significantly impacting the area’s rank.

The proposed model has advantages, including reduced complexity and computation of air pollutant weights using subjective and objective weight concepts. The results can aid government agencies in making informed decisions. Furthermore, the model has the potential for expansion by incorporating relevant environmental parameters that may contribute to pollution in the future. Including spatial and temporal analysis can help understand variations in pollution levels across regions and periods. The proposed method can also be compared with other established pollution assessment methodologies.

Footnotes

Acknowledgment

The authors thank the Tamil Nadu Pollution Control Board (TNPCB, Chennai) for providing the air pollution monitoring data during the Diwali festival in Tamil Nadu.

References

Akram

, Zahid

and Deveci

, Multi-criteria groupdecision-making for optimal management of water supply with fuzzyELECTRE-based outranking method, Applied Soft Computing 143 (2023), 110403.

Alguliyev

R.M.

, Aliguliyev

R.M.

, Mahmudova

R.S.

Multicriteria personnel selection by the modified fuzzy VIKOR method, The Scientific World Journal, (2015), 612767.

Buckley

J.J.

, Fuzzy hierarchical analysis, Fuzzy Sets andSystems 17(3) (1985), 233–247.

Central Pollution Control Board (CPCB), National Air Quality Index (2022). Available online at: https://app.cpcbccr.com/ccr/

Chakraverty

, Sahoo

D.M.

, Mahato

N.R.

Concepts of Soft Computing Fuzzy and ANN with Programming, Springer Nature Singapore Pte Ltd. (2019).

Chanchpara

, Muduli

, Prabhakar

, Madhava

A.K.

, Thorat

R.B.

, Haldar

and Ray

, Pre-to-post Diwali air quality assessment and particulate matter characterisation of a western coastal place in India, Environmental Monitoring and Assessment 195(3) (2023), 413.

Chitnis

, Sarella

, Khambete

A.K.

and Shrikant

R.B.

, Fuzzy MCDMapproach for air quality assessment, International Journal forInnovative Research in Science and Technology 1(11) (2015), 59–65.

Dionova

B.W.

, Mohammed

M.N.

, Al-Zubaidi

and Yusuf

, Environmentindoor air quality assessment using fuzzy inference system, IctExpress 6(3) (2020), 185–194.

Ghorabaee

M.K.

, Amiri

, Zavadskas

E.K.

, Hooshmand

and Antuchevičienė

, Fuzzy extension of the CODAS method formulti-criteria market segment evaluation, Journal of BusinessEconomics and Management 18(1) (2017), 1–19.

10.

Glencross

D.A.

, Ho

T.R.

, Camina

, Hawrylowicz

C.M.

and Pfeffer

P.E.

, Air pollution and its effects on the immune system, Free Radical Biology and Medicine 151 (2020), 56–68.

11.

Hosseini

S.M.

, Paydar

M.M.

and Hajiaghaei-Keshteli

, Recoverysolutions for ecotourism centers during the Covid-19 pandemic:Utilizing Fuzzy DEMATEL and Fuzzy VIKOR methods, Expert Systemswith Applications 185 (2021), 115594.

12.

Issa

, Saeed

, Miky

, Alqurashi

and Osman

, HybridAHP-fuzzy TOPSIS approach for selecting deep excavation supportsystem, Buildings 12(3) (2022), 295.

13.

Kahraman

Fuzzy multi-criteria decision making: theory and applications with recent developments, Springer Science and Business Media (2008).

14.

Kim

, Kim

W.H.

, Kim

Y.Y.

and Park

H.Y.

, Air pollution and centralnervous system disease: a review of the impact of fine particulatematter on neurological disorders, Frontiers in Public Health 8 (2020), 575330.

15.

Kumaravel

and Vallinayagam

, Fuzzy inference system for airquality in using Matlab, Chennai, India, Journal ofEnvironmental Research and Development 7(1) (2012), 181–184.

16.

Lah

M.S.C.

and Arbaiy

, A simulation study of first-orderautoregressive to evaluate the performance of measurement errorbased symmetry triangular fuzzy number, Indonesian Journal ofElectrical Engineering and Computer Science 18(3) (2020), 1559–1567.

17.

, Wang

, Fan

, Li

and Chen

, A novel hybrid MCDM modelfor machine tool selection using fuzzy DEMATEL, entropy weightingand later defuzzification VIKOR, Applied Soft Computing 91 (2020), 106207.

18.

Lin

, Pan

and Chen

, Comprehensive evaluation of urban airquality using the relative entropy theory and improved TOPSISmethod, Air Quality, Atmosphere & Health 14 (2021), 251–258.

19.

Liu

, Zhang

, Wu

and Dong

, Ranking range based approach toMADM under incomplete context and its application in ventureinvestment evaluation, Technological and Economic Developmentof Economy 25(5) (2019), 877–899.

20.

MangarajS.

, Sahu

, Beig

and Yadav

, A comprehensivehigh-resolution gridded emission inventory of anthropogenic sourcesof air pollutants in Indian megacity Kolkata, SN AppliedSciences 4(4) (2022), 117.

21.

Manisalidis

, Stavropoulou

and Stavropoulos

, and E.Bezirtzoglou, Environmental and health impacts of air pollution: areview, Frontiers in Public Health 8 (2023), 14.

22.

Opricovic

, A fuzzy compromise solution for multicriteriaproblems, International Journal of Uncertainty, Fuzziness andKnowledge-Based Systems 15(3) (2007), 363–380.

23.

Opricovic

, Fuzzy VIKOR with an application to water resourcesplanning, Expert Systems with Applications 28(10) (2011), 12983–12990.

24.

Ozkaya

and Erdin

, Evaluation of sustainable forest and airquality management and the current situation in europe throughoperation research methods, Sustainability 12(24) (2020), 10588.

25.

Pamucar

, Torkayesh

A.E.

, Deveci

and Simic

, Recovery centerselection for end-of-life automotive lithium-ion batteries using anintegrated fuzzy WASPAS approach, Expert Systems withApplications 206 (2022), 117827.

26.

Phan

V.D.V.

, Huang

Y.F.

, Hoang

T.T.

and Do

M.H.

, Evaluating Barriersto Supply Chain Resilience in Vietnamese SMEs: The Fuzzy VIKORApproach, Systems 11(3) (2023), 121.

27.

Rider

C.F.

and Carlsten

, Air pollution and DNA methylation:effects of exposure in humans, Clinical Epigenetics 11(1) (2019), 1–15.

28.

Saaty

T.L.

, How to make a decision: the analytic hierarchy process, European Journal of Operational Research 48(1) (1990), 9–26.

29.

Sabharwal

, Pollution and Environmental Impacts during Festivalsin India, IAHRW International Journal of Social SciencesReview 11(1) (2023), 132–133.

30.

Sharafi

, Soltanifar

and Lotfi

F.H.

, Selecting a supplierutilizing the new fuzzy voting model and the fuzzy combinativedistance-based assessment method, EURO Journal on DecisionProcesses 10 (2022), 100010–green.

31.

Shannon

C.E.

, A mathematical theory of communication, The BellSystem Technical Journal 27(3) (1948), 379–423.

32.

Suresh

, Modi

, Sharma

A.K.

, Arisutha

and Sillanpää

, Pre-COVID-19 pandemic: effects on air quality inthe three cities of India using fuzzy MCDM model, Journal ofEnvironmental Health Science and Engineering 20 (2022), 41–51.

33.

Tamil Nadu Pollution Control Board (TNPCB), Diwali festival data (2019–2021). Available online at: https://tnpcb.gov.in/aqisurvey.php

34.

Turner

M.C.

, Andersen

Z.J.

, Baccarelli

, Diver

W.R.

, GapsturC.A.

S.M.

, Pope

C.A.

, III Cohen

, Outdoor air pollution and cancer: Anoverview of the current evidence and public health recommendations, CA: A Cancer Journal for Clinicians 70(6) (2020), 460–479.

35.

Turskis

, Zavadskas

E.K.

, Antucheviciene

and Kosareva

, Ahybrid model based on fuzzy AHP and fuzzy WASPAS for constructionsite selection, International Journal of ComputersCommunications & Control 10(6) (2015), 113–128.

36.

Tushar

Z.N.

, Bari

A.M.

and Khan

M.A.

, Circular supplier selection inthe construction industry: A sustainability perspective for theemerging economies, Sustainable Manufacturing and ServiceEconomics 1 (2022), 100005.

37.

Xiao

, Wang

and Zhang

, Exploring the ordinal classificationsof failure modes in the reliability management: Anoptimization-based consensus model with bounded confidences, Group Decision and Negotiation 31(1) (2022), 49–80.

38.

and Chernikov

A.S.

, Real-time air quality assessment based onthe EM-TOPSIS-PROMETHEE integrated assessment method, In IOPConference Series: Earth and Environmental Science 864(1) (2021), 012058.

39.

Zadeh

L.A.

, Fuzzy sets, Information and Control 8 (1965), 338–353.

40.

Zeydan

Ö.

and Pekkaya

, Evaluating air quality monitoringstations in Turkey by using multi criteria decision making, Atmospheric Pollution Research 12(5) (2021), 101046.

41.

Zhang

, Li

C.C.

, Liu

and Dong

, Modeling personalizedindividual semantics and consensus in comparative linguisticexpression preference relations with self-confidence: Anoptimization-based approach, IEEE Transactions on FuzzySystems 29(3) (2019), 627–640.

42.

Zhang

, Wang

, Dong

, Chiclana

and Herrera-Viedma

, Social trust driven consensus reaching model with a minimumadjustment feedback mechanism considering assessments-modificationswillingness, IEEE Transactions on Fuzzy Systems 30(6) (2021), 2019–2031.

43.

Zimmermann

Fuzzy Set Theory and its Applications, Springer, Dordrecht (2001).

Assessment of polluted region using an integrated weighting approach and fuzzy VIKOR method

Abstract

Keywords

1 Introduction

2 Preliminaries

2.1 Fuzzy set theory [43]

2.2 Fuzzy numbers [43]

2.3 Triangular fuzzy number [5]

2.4 Percentage error method [16]

2.5 Fuzzy operation [22]

2.6 Defuzzification [2]

3 Study area and data collection

4.2 FAHP

Table 4 Obtained entropy weights of the attributes Year β1 β2 β3 β4 2019 0.167 0.117 0.206 0.450 2020 0.266 0.201 0.221 0.312 2021 0.206 0.108 0.181 0.506

5.2.1 Scenario 1

Footnotes

Acknowledgment

References

Table 4
Obtained entropy weights of the attributes

Year β₁ β₂ β₃ β₄

2019 0.167 0.117 0.206 0.450

2020 0.266 0.201 0.221 0.312

2021 0.206 0.108 0.181 0.506