Optimization of machining parameters in end milling of GFRP composites based on the Taguchi method with fuzzy logics

Abstract

Glass Fiber Reinforced Plastics (GFRP) composite is considered to be an economic alternative to various heavy exotic materials. It is widely used in a variety of applications from aircraft to machine tools due to their light weight, high modulus, specific strength and high fracture toughness. The machining of composite is different from the conventional machining of metal due to the composite's anisotropic and non-homogeneous nature. This paper discusses the application of the Taguchi method with fuzzy logic to optimize the machining parameters for machining of GFRP composites with multiple characteristics. A multi-response performance index (MRPI) was used for optimization. The machining parameters viz., Tool geometry (helix angle of the end mill cutter), spindle speed, feed rate, depth of cut and work piece(fiber orientation), were Optimized with consideration of multiple performance characteristics viz., machining force, delamination, surface roughness and material removal rate. The results from confirmation runs indicated that the determined optimal combination of machining parameters improved the performance of the machining process.

Keywords

GFRP composites MRPI helix angle Taguchi method fuzzy logics

References

Ross

P.J.

, Taguchi Techniques for Quality Engineering, McGraw-Hill, New York, 1996. refyear

Taguchi

, Introduction to Quality Engineering, Asian productivity organization, Tokyo, 1990.

Lin

J.L.

, Wang

K.S.

, Yan

B.H.

and Tarng

Y.S.

, Optimization of the electrical discharge machining process based on the Taguchi method with fuzzy logics, J Mater Proc Tech 102 (2000), 48-55.

Elsayed

E.A.

and Chen

, Optimal levels of process parameters for products with multiple characteristics, Int Jl Prod Res 31 (1993), 1117-1132.

Tarng

Y.S.

and Yang

W.H.

, Application of the Taguchi method to the optimization of the submerged arc welding process, Mater Manuf Process 13 (1998), 455-467.

Zadeh

, Fuzzy sets, Inform and Control 8 (1965), 338-353.

Raghukandan

, Hokamoto

and Manikandan

, Optimization of process parameters in explosive cladding of mild steel and aluminum, Met Mater-Int 10 (2004), 193-197.

Ross

T.J.

, Fuzzy Logic with Engineering Applications, Mc-Graw Hill Int. Edn., 1992.

Tarng

Y.S.

, Juang

S.C.

and Chang

C.H.

, The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing, J Mater Proc Tech 128 (2002), 1-6.

10.

Phadke

M.S.

, Quality Engineering Using Robust Design, Prentice-Hall, Englewood Cliffs, NJ, 1989.

11.

Sakuma

and Seto

, Tool wear in cutting glass-fiber-reinforced plastics: the relation between fiber orientation and tool wear, Bulletin of the JSME 26 (1983), 1420-1427.

12.

Takeyama

and Lijima

, Machinability of glassfiber reinforced plastics and application of ultrasonic machining, Annals of the CIRP 37 (1988), 93-96.

13.

Eriksen

, Influence from production parameters on the surface roughness of a machined short fibre reinforced thermoplastic, Int J Machine Tools and Manu 39 (1999), 1611-1618.

14.

S.-O.

, Lee

E.-S.

and Noh

S.-L.

, A study on the cutting characteristics of glass fiber reinforced plastics with respect to tool materials and geometries, J Mater Proc Tech 68 (1997), 60-67.

15.

Palanikumar

, Ph. D. Thesis, Anna University, Chennai, India, 2004.

16.

Palanikumar

, Karunamoorthy

and Karthikeyan

, Optimizing the machining parameters for minimum surface roughness in turning of GFRP composites using design of experiments, J Mater Sci Tech 20 (2004), 373-378.

17.

Yang

J.L.

and Chen

J.C.

, A systematic approach for identifying optimum surface roughness performance in end-milling operations, Journal of Ind Tech 17(2) (2001), web archieve.

18.

Zimmermann

H.J.

, Fuzzy Set Theory and its Applications, Kluwer Academic Publishers, London, 1985.

19.

Cox

, Fuzzy Fundamentals, IEEE Spectrum, Oct. Issue, 1992.

20.

Santhanakrishnan

, Ph D Thesis, IIT Madras, Chennai, India, 1990.

21.

Komanduri

, Mechanical Engineering, April Issue, 58, 1993.