Enhanced Bone Screw Fixation with Biodegradable Bone Cement in Osteoporotic Bone Model

Curtis R , Goldhahn J , Schwyn R , Regazzoni P , Suhn N. Fixation principles in metaphyseal bone –a patent based review. Osteoporos Int 2005; 16: S54–64.

Lonnroos E , Kautiainen H , Karppi P , Increased incidence of hip fractures. A population based-study in Finland. Bone 2006; 39: 623–7.

Goldhahn J , Suhm N , Goldhahn S , Blauth M , Hanson B. Influence of osteoporosis on fracture fixation - a systematic literature review. Osteoporos Int 2008; 19: 761–72.

Strømsøe K. Fracture fixation problems in osteoporosis. Injury 2004; 35: 107–13.

Schoenfeld AJ , Battula S , Sahai V , Pull-out strength and load to failure properties of self-tapping cortical screws in synthetic and cadaveric environments representative of healthy and osteoporotic bone. J Trauma 2008; 64: 1302–7.

Collinge C , Merk B , Lautenschlager EP. Mechanical evaluation of fracture fixation augmented with tricalcium phosphate bone cement in a porous osteoporotic cancellous bone model. J Orthop Trauma 2007; 21: 124–8.

Battula S , Schoenfeld A , Vrabec G , Njus GO. Experimental evaluation of the holding power / stiffness of the self-tapping bone screws in normal and osteoporotic material. Clin Biomech (Bristol, Avon) 2006; 21: 533–7.

Patel PSD , Shepherd DET , Hukins DWL. The effect of screw insertion angle and thread type on the pullout strength of bone screws in normal and osteoporotic cancellous bone models. Med Eng Phys 2010; 32: 822–8.

Patel PSD , Shepherd DET , Hukins DWL. Compressive properties of commercially available polyurethane foams as mechanical models for osteoporotic human cancellous bone. BMC Muscoloskelet Disord 2008; 9: 137–43.

Chapman JR , Harrington RM , Lee KM , Anderson PA , Tencer AF , Kowalski D. Factors affecting the pull-out strength of cancellous bone screws. J Biomech Eng 1996; 118: 391–8.

Seebeck J , Goldhahn J , Morlock MM , Schneider E. Mechanical behaviour of screws in normal and osteoporotic bone. Osteoporos Int 2005; 16: S107–11.

Hoey D , Taylor D. Comparison of the fatigue behaviour of two different forms of PMMA. Fatigue Fract Engng Mater Struct 2009; 32: 261–9.

Tsukeoka T , Suzuki M , Ohtsuki C , Mechanical and histological evaluation of a PMMA-based bone cement modified with γ-methacryloxypropyltrimethoxysilane and calcium acetate. Biomaterials 2006; 27: 3897–903.

Espigares I , Elvira C , Mano JF , Vázquez B , Román JS , Reis RL. New partially degradable and bioactive acrylic bone cements based on starch blends and ceramic fillers. Biomaterials 2002; 23: 1883–95.

Race A , Miller MA , Mann KA. A modified PMMA cement (Sub-cement) for accelerated fatigue testing of cemented implant constructs using cadaveric bone. J Biomech 2008; 41(14): 3017–23.

Flahiff CM , Gregg AG , Nicholas RW. Pullout strength of fixation screws from polymethyl-metacrylate bone cement. Biomaterials 1995; 16: 533–6.

Ridder VA , Lange S , Kerver BJH , Poser BD. Posterior wall acetabular fractures. Augmentation of comminuted and impacted cancellous bone with Norian SRS, a carbonated apatite cement. Eur J Trauma 2003; 29: 369–74.

Stadelmann VA , Bretton E , Terrier A , Procter P , Pioletti DP. Calcium phosphate cement augmentation of cancellous bone screws can compensate for the absence of cortical fixation. J Biomech 2010; 43: 2869–74.

Hashemi A , Bednar D , Ziada S. Pullout strength of pedicle screws augmented with particulate calcium phosphate: An experimental study. Spine J 2009; 9: 404–10.

Fedak PWM , Kolb E , Borsato G , Kryptonite bone cement preventa pathologiv sternal displacement. Ann Thorac Surg 2010; 90: 979–85.

van Hooy-Corstjens CSJ , Govaert LE , Spoelstra AB , Bulstra SK , Wetzels GMR , Koole LH. Mechanical behavior of a new acrylic radiopaque iodine-containing bone cement. Biomaterials 2004; 25: 2657–67.

Eriksson F , Mattsson P , Larsson S. The effect of augmentation with resorbable or conventional bone cement on the holding strength for femoral neck fracture devices. J Orthop Trauma 2002; 16: 302–10.

Pärssinen A , Kohlmayr M , Leskelä M , Lahcini M , Repo T. Catalytic polymerization of ε caprolactone in air. J Polym Sci A Polym Chem 2010; 1: 834–6.

Battula S , Schoenfeld AJ , Sahai V , Vrabec GA , Tank J , Njus GO. The effect of pilot hole size on the insertion torque and pull-out strength of self-tapping cortical bone screws in osteoporotic bone. J Trauma 2008; 64: 990–5.

Steeves M , Stone C , Mogaard J , Byrne S. How pilot-hole size affects bone-screw pull-out strength in human cadaveric cancellous bone. Can J Surg 2005; 48: 207–12.

ASTM F1839–01. Standard specification for rigid polyurethane foam for use as a standard material for testing orthopedic devices and instrument. In: Annual book of ASTM standards, medical devices and services. West Conshohocken, The American Society for Testing and Materials; 2001.

Grant JA , Bishop NE , Götzen N , Sprecher C , Honl M , Morlock MM. Artificial composite bone as a model of human trabecular bone: The implant-bone interface. J Biomech 2007; 40: 1158–64.

Gibson L , Ashby M. Cancellous bone, Cellular solids: Structure & Properties. New York: Pergamon press 1988; 316–31.

Hashemi A , Bednar D , Ziada S. Pullout strength of pedicle screws augmented with particulate calcium phosphate: An experimental study. Spine J 2009; 9: 404–10.

Boyd D , Towler MR , Wren A , Clarkin OM. Comparison of an experimental bone cement with surgical Simplex® P, Spinelex® and Cortoss®. J Mater Sci Mater Med 2008; 19: 1745–52.

Kühn KD. Bone Cements. Berlin: Springer-Verlag 2000; 142–8.

Habraken WJ , Wolke GJ , Jansen JA. Ceramic composites as matrices and scaffolds for drug delivery in tissue engineering. Adv Drug Deliv Rev 2007; 59: 234–48.

Li B , Aspden RM. Composition and mechanical properties of cancellous bone from the femoral head of patients with osteoporosis or osteoarthritis. J Bone Miner Res 1997; 12: 641–51.

Koistinen A , Santavirta S , Kröger H , Lappalainen R. Effect of bone mineral density and amorphous diamond coatings on insertion torque of bone screws. Biomaterials 2005; 26: 5687–94.

Koistinen A , Korhonen H , Kiviranta I , Kröger H , Lappalainen R. Analysis of plastic deformation in cortical bone after insertion of coated and non-coated self-tapping orthopaedic screws. Proc Inst Mech Eng H 2011; 225: 629–39.