2b:T425,

The purpose of this article is to describe a technique for secondary reconstruction of traumatic orbital wall defects using titanium implants that act as three-dimensional (3D) puzzle pieces. We present three cases of large defect reconstruction using implants produced by Xilloc Medical B.V. (Maastricht, the Netherlands) with a 3D printer manufactured by LayerWise (3D Systems; Heverlee, Belgium), and designed using the biomedical engineering software programs ProPlan and 3-Matic (Materialise, Heverlee, Belgium). The smaller size of the implants allowed sequential implantation for the reconstruction of extensive two-wall defects via a limited transconjunctival incision. The precise fit of the implants with regard to the surrounding ledges and each other was confirmed by intraoperative 3D imaging (Mobile C-arm Systems B.V. Pulsera, Philips Medical Systems, Eindhoven, the Netherlands). The patients showed near-complete restoration of orbital volume and ocular motility. However, challenges remain, including traumatic fat atrophy and fibrosis.

2c:T545,

The objective of this study is to analyze the difference in bite forces in patients treated for mandibular fractures with 2.0 mm conventional and locking titanium plating system. A randomized study was performed for the treatment of fractures of mandible. In this study, 20 adult patients with isolated mandibular fracture were included. The patients were randomly allocated into two groups, that is, Group I-2.0 mm nonlocking (traditional) and Group II-2.0 mm locking plates. Bite force was evaluated at 1st, 3rd, and 6th weeks. Comparison of all the assessed parameters between both the groups depicted no significant difference in terms of pain, swelling including the incidence of infection, paresthesia, and hardware failure. Although same was true in case of bite force between both the groups at various time intervals, there was statistically significant increase in the bite force within the group comprising patients in whom locking plates was used between 1st and 3rd weeks follow-up period and highly significant increase in bite force between 1st and 6th weeks of follow-up period. The rapid improvement of bite force values when locking plates were used implies that the locking plate can be used in preference to conventional plates to achieve early mobilization with assured stability in the treatment of mandibular fractures.

2d:T453,

Distraction osteogenesis (DO) is becoming a popular method of reconstruction for maxillofacial bony deformities or defects secondary to trauma or surgical tumor ablation. However, the technique is very sensitive in terms of the rate and rhythm of distraction. Because of this, there is a need for monitoring of the distraction regenerate during the distraction as well as the consolidation period. The present study was conducted to assess the regenerate using two imaging modalities, namely, ultrasonography (USG) and cone beam computed tomography (CBCT) to determine their relative efficacies and to weigh their clinical usefulness in assessment of DO regenerate. The study was conducted on 12 patients (18 sites) who underwent mandibular distraction for correction of facial deformities. The results showed that overall USG correlated better with the condition of regenerate (r = 0.606) as compared with CBCT (r = 0.476). However, USG was less effective as compared with CBCT in assessing the regenerate once corticomedullary differentiation occurred in the bone.

2e:T6b4,