Journal of Veterinary Dentistry

The reported failure rate for full veneer crowns of canine teeth of dogs is suboptimal, particularly in teeth with naturally poor retentive features, such as those with low height/diameter (H/D) ratios or high convergence angles (CAs). The objective of the present study was to evaluate the application of axial grooves in an effort to develop a crown preparation design that enhances the retention of full veneer crowns in dogs. Crown dislodgment testing was performed on cast alloy dies of canine teeth with unfavorable retention features (low H/D and high CA) prepared with (n = 14) and without axial grooves (n = 15) to evaluate the force required to dislodge a cemented full veneer crown. The crown/die units were secured within a universal testing machine and a load was applied at the 45° oblique direction from distal to mesial to replicate the vector encountered during biting–pulling action. The maximum force required to cause crown dislodgment was recorded for each crown. Statistical analysis revealed a significant increase in force required for crown dislodgment when axial grooves were included in the crown preparation design (P < .001). Crown retention is improved in canine teeth with otherwise poor retention features when axial grooves are made in the labial and palatal/lingual walls during crown preparation.

The reported failure rate for full veneer crowns in dogs is suboptimal, particularly in teeth with naturally poor retentive features such as the maxillary fourth premolar tooth of dogs. Although the data regarding crown retention on the maxillary fourth premolar in dogs are limited, there are data that suggest the crown failure rate could be similar to that of the canine tooth. Thus, methods to improve retentive features of the preparation design should be pursued. The objective of the present study is to quantify the influence of axial grooves on the dislodgment resistance of full veneer metal crowns in dogs. Crown dislodgment testing was performed on cast alloy dies of the maxillary fourth premolar tooth with unfavorable retentive features prepared with and without axial grooves, to quantify the difference in force required to dislodge a cemented full veneer crown. The force required to cause crown dislodgment was recorded for each crown. Statistical analysis revealed a significant increase (P < .001) in the force required for crown dislodgment in teeth prepared with axial grooves compared to those prepared without axial grooves.

The equine first premolar (“wolf tooth,” Triadan number 05) is frequently extracted, and although extracted teeth have been observed to vary greatly in size, published data describing tooth dimensions are limited. Total length, root length, crown height, and crown width were measured in 65 extracted wolf teeth. Dimensions, expressed as median (range) mm, were total length: 21 (12-34), root length: 13.2 (0-19.6), crown height: 7 (2-20), and crown width: 7 (2.6-16). Root length exceeded crown height in 61 of the 65 teeth. Crown height and crown width were either not correlated or poorly correlated with root length using Spearman rank correlation coefficient (ρ = −.093 and ρ = .463, respectively). Total length was poorly correlated with crown height (ρ = .443) but had a fair correlation with crown width (ρ = .646). The dimensions of the clinical crown of the tooth do not provide a good estimate of root length, although the root is usually longer than the crown.

Discontinuities of the mandible can occur for a variety of reasons including primary pathology of bone, pathologic fracture secondary to periodontal disease, and segmental resection for the treatment of neoplasia. Surgical intervention is necessary in many cases to establish normal occlusion and normal mandibular function. Rigid stabilization and treatment of these defects can be challenging due to the limited availability of bone for fixation as well as limited soft tissue coverage. This case report describes successful treatment of a nonunion fracture using cortical allograft and locking titanium miniplates. Complete osseointegration and bone healing were achieved, allowing for complete return to normal occlusion and function.

Mesioverted maxillary canine teeth in combination with linguoverted mandibular canine teeth are a common ramification of persistent deciduous maxillary and mandibular canine teeth. Without the physical presence of the mandibular canine teeth, the maxillary third incisor and canine teeth diastemata are frequently narrowed. The creation of normal occlusion requires treatment of all 4 canine teeth; the mandibular canine teeth must be tipped labially and the maxillary canine teeth must be tipped and/or partially translated distally. This case report discusses the novel integration of 2 well-described orthodontic techniques to simultaneously treat both mesioverted maxillary canine teeth and linguoverted mandibular canine teeth, achieving a comfortable, functional occlusion.

Periodontal disease is one of the most common diseases diagnosed in dogs and cats. Guided tissue regeneration (GTR) is a treatment alternative to extraction of strategically important teeth. The barrier membrane used in the GTR procedure is of key importance. The purpose of this case series was to evaluate a liquid polymer gel as a membrane for GTR. The polymer gel (N-methyl-2-pyrrolidone and poly [DL-lactide]) combined with 8.5% doxycycline hyclate was used in place of a traditional membrane in 4 teeth. The teeth were re-examined 6 months postoperatively for radiographic evaluation. A decrease in probing depth and new alveolar bone formation was seen 6 months postoperatively. Improvement in periodontal disease stage was seen in 2 of the 4 teeth. Larger controlled trials with histopathologic evaluation are indicated to further assess the use of this polymer as a membrane in GTR. However, the clinical outcomes of all 4 treated teeth were considered successful.

Oral and maxillofacial surgery in veterinary medicine carries the risk of severe hemorrhage due to the great vascular supply of the head. Temporary hemostasis can be achieved with the application of pressure or hemostatic agents, but more definitive treatment may be needed to ensure bleeding will not resume once the patient is awake and normotensive. ^1,2 Actively bleeding vessels encountered during maxillofacial surgery may be inaccessible, and vessels may recoil into bone, sometimes preventing definitive ligation. These scenarios may require ligation of the common carotid artery. ¹ The purpose of this paper is to describe how to perform ligation of the common carotid artery in a step-by-step fashion. Both temporary and permanent ligation techniques are described.