Plastic Surgery

The management of volar plate avulsion fractures in the context of a stable joint and a bony fragment of less than 30% has traditionally been conservative. This study was performed to assess volar plate healing with high-resolution ultrasound in order to provide early full mobilization.

Between January 2012 and December 2013, 78 patients with volar plate injuries of the proximal interphalangeal (PIP) joints (42 distortions and 36 dislocations) were treated conservatively in our department for volar plate avulsion fracture associated with stable joint and bony fragment inferior to 30% of the intra-articular surface assessed both by radiography and ultrasound. Conservative treatment included extension stop splinting for the first 2 weeks and Coban bandage until 6 weeks postinjury. However, it may be possible to modify the duration of extension stop splinting based on clinical and ultrasound findings (with no additional X-ray) performed every 2 weeks for the first 3 months and then at 4 months postinjury. Only patients with residual contracture at the 4-month assessment had prolonged follow-up in order to ensure adequate dynamic splint therapy.

The amount of soft tissue oedema and the mobility of the volar plate were factors used to determine return to full mobilization. Mean extension-stop-splint wear was 16 ± 2 days. During the first 2 follow-up assessments, 4 patients were excluded from the study because of the instability of the PIP joint. One patient required refixation of a large fragment of 30%, 2 patients required superficial flexor tendon (FDS) tenodesis of the unstable volar plate in hyperextension and 1 other patient required arthrodesis of the PIP joint. In 51 patients, the postoperative follow-up was free of complications at 4 months. In 18 patients, flexion contracture of 20° (range 11°-40°) and oedema during follow-up required dynamic extension splints for 3 to 5 months. After this time, 5 patients had a residual contracture of 10° to 15°.

Avulsion fractures of the volar plate at the PIP joint are common. In general, they have a good outcome using the conservative treatment with extension block splints. Flexion contracture is a common complication and may be reduced by immediate splints in full extension at night and Coban bandage during the day. High-resolution sonography is a convenient tool to evaluate palmar plate stability, to assess reduction of oedema, and thus to guide safe return to full range of movement.

Canada has low immediate breast reconstruction (IBR) rates compared to the United States and Europe. Breast cancer survivors live with mastectomy defects sometimes for years, and this represents an area for improvement in cancer care.

This study qualitatively assessed (1) information provided about breast reconstruction at the time of cancer diagnosis among women seeking delayed breast reconstruction (DBR) and (2) referral practices for plastic surgery consultation for DBR.

Fifty-two consecutive patients seen in consultation for DBR at a single Canadian tertiary care centre completed questionnaires regarding their experience in seeking breast reconstruction. Seven semi-structured interviews were conducted to further explore themes identified through questionnaires. Questionnaire responses and interview transcripts were analyzed for recurring themes using standard qualitative techniques.

A significant portion of women (43%) was interested in reconstruction prior to mastectomy, yet IBR was infrequently discussed (14%) or discouraged by their oncologic surgeons (33%). Common patient reasons for not pursuing IBR were referring physician objection and not having adequate knowledge. Women expressed wanting to discuss reconstruction at the time of cancer diagnosis. Half of the patients had attended another consultation, but the initial plastic surgeon either did not offer procedures for which these women were candidates or had prohibitively long surgical wait times.

Lack of information about reconstructive options at the time of cancer diagnosis and perceived access barriers to plastic surgeons may contribute to underutilization of IBR in Canada. Access to breast reconstruction can be improved by reducing inefficiencies in plastic surgery referrals.

Resorbable mesh and porous polyethylene are frequently used alloplastic materials for the treatment of the orbital blowout fractures. The literature lacks reports comparing their long-term effects on experimental models.

Our aim was to radiologically and histologically evaluate the effectiveness and safety of porous polyethylene and resorbable mesh in a rabbit orbital blowout fracture model.

Twelve New Zealand white rabbits (24 orbits) were randomized to 4 groups. In group 1, only orbital floor dissection was done. In group 2, following orbital floor dissection, a 10-mm defect was created without any extra procedure. In group 3, following a 10-mm defect creation, a 12-mm-round cut porous polyethylene was placed on the defect. In group 4, following a 10-mm defect creation, a 12-mm-round cut resorbable mesh was placed on the defect. Computed tomographic analysis was performed during follow-up period. Orbital floors were evaluated histologically at month 6.

No clinical complications were observed during follow-up period. In radiological evaluation, there was no statistically significant difference between groups regarding bone formation. In histological evaluation, the connective tissue was denser, and organized and better bone formation was observed in group 3 and 4 when compared with other groups.

Although no significant radiological changes were present, porous polyethylene and resorbable mesh performed better histologically. They were effective and well tolerated for reconstruction of the isolated orbital floor defects.

Intraoperative nerve stimulation is done routinely in brachial plexus and peripheral nerve surgery as well as in selective neurectomy in spastic patients.

The current study compares the use of 2 different devices for nerve stimulation: a totally disposable nerve stimulator and a nerve stimulator used for nerve blocks by anesthetists.

A retrospective study of 60 patients who underwent brachial plexus surgery: In 30 patients, we used the totally disposable nerve stimulator (group 1) and in another 30 patients, we used the anesthesia device (group 2). The cost of disposable materials used for nerve stimulation was calculated in each group. The same surgeon performed all operations, and he was asked to give his subjective opinion regarding the convenience and ease of use of the device in each group.

The main advantages of the totally disposable device are its placement totally within the sterile field, and it is operated by the surgeon without the need to communicate with the anesthetist. However, the totally disposable device had several major disadvantages when compared to the anesthesia device. Firstly, the disposable stimulator can only deliver 0.5, 1.0, and 2.0 mA stimuli, while the anesthesia device can deliver stimuli of 0.1 to 5 mA (in 0.1 mA increments). Secondly, the disposable stimulator frequently fails to operate during surgery, and this is not experienced with the anesthesia device. Finally, the cost of disposables is less using the anesthesia device.

Our center has stopped using the disposable nerve stimulator in favour for the anesthesia device.

Texturing of breast implants is done to decrease the risk of associated complications. Each manufacturer utilizes unique and at times proprietary techniques to texture the surface of their implants. Little is known about the integrity of this surface structure texturing or the propensity for the surfaces to shed particulate matter. This study aimed to determine the extent of surface particulate shedding from 3 textured implants approved by the US Food and Drug Administration (FDA), which are manufactured by Allergan, Mentor, and Sientra.

Control images of each of the 3 textured breast implants were obtained with scanning electron microscopy (SEM). A liquid adhesive, ethylene vinyl acetate (EVA) copolymer was then applied to the external shell of the implants, allowed to cool, and peeled from the surface. Images of the EVA copolymer were taken with SEM to qualitatively analyze displacement of surface particulate debris. Scanning electron microscopy imaging of the implants was repeated for qualitative comparisons with the control images.

The peeled copolymer of the 3 implants exhibited surface shedding. Comparison of the 3 breast implants showed the shedding to be greatest for the Allergan implant.

This study highlights the dynamic surface material properties of the 3 FDA-approved breast implants. Shedding of particulate matter from the implant surfaces can be precipitated by moderate adhesion. Our qualitative examination of SEM findings showed more debris shed from the Allergan breast implants than from the Mentor or Sientra implants.

The keystone design perforator island flap is a trapezoidal-shaped random perforator island flap with many advantages over primary closure, skin grafting, and other local flaps for soft tissue reconstruction commonly encountered with cancer excisions.

This case series of 39 keystone flaps in 37 patients reviews the practical design, use, and applications of the flap while highlighting certain important considerations. Keystone flaps were designed as in the original description, with a minor modification in the lower extremity where a higher flap to defect width ratio was used.

Defects varying in size from 6 to 63 cm² were reconstructed in 23 males and 14 females ranging in age from 49 to 89. In all 39 cases, there were 2 minor complications of partial flap dehiscence and no major complications such as partial or complete flap loss.

The keystone flap is a versatile and reliable flap with applications almost anywhere on the body. A higher ratio of flap width to defect width up to 1:3 is more appropriate for the lower extremity where tension is higher.

The superficial femoral artery perforator (SFAP) flap offers advantages for pedicled transfer including consistent perforators and vascular territory, well-hidden donor site scar, and hairless flap skin. This article provides a historical overview of the SFAP flap and describes the vascular anatomy of the SFAP by 3-dimensional analysis and angiography.

Ten fresh cadavers were injected using the lead oxide technique through the femoral artery. Spiral computed tomographic scanning and 3-dimensional evaluation were used to describe the SFAP number, diameter, length, type, and location.

A total of 288 perforators in 15 cadaver limbs were identified; 19 ± 8 perforators per thigh ≥0.5 mm in diameter, with an average diameter of 0.8 ± 0.3 mm and a range of 0.5 to 2.1 mm; the mean length of each perforator was 68 ± 31 mm; 45% were septocutaneous and 55% were musculocutaneous. The medial thigh region was divided into 6 areas (anterior and posterior halves, then the proximal third, middle third, and distal third of each). The majority of the perforators were located in the middle and distal thirds of the anteromedial thigh (33% each).

Using 3-dimensional vascular anatomical analysis, the number, location, length, type, and diameter of the SFAP were documented. In the literature, relatively few reports of the use of the SFAP flap are available, however, this is a valid donor site with consistent cutaneous perforators suitable for harvest as a local or regional flap transfer. This is the first 3-dimensional vascular anatomical study to comprehensively document the vascular anatomy of the SFAP flap.

The aim of this retrospective study was to evaluate the outcomes of secondary alveolar bone grafting and late secondary alveolar bone grafting in 66 unilateral cleft lip and palate patients.

The total patients were 66 unilateral cleft lip and palate patients, out of which 19 patients underwent secondary alveolar bone grafting and 47 patients underwent late secondary alveolar bone grafting. Autogenous anterior iliac crest cancellous bone graft was harvested and used for grafting the alveolar clefts. Radiographic assessment based on Enemark’s scoring according to the marginal bone levels was done on the intraoral periapical radiographs taken 6 months after performing the surgery.

Twelve (63%) out of the 19 patients on whom secondary alveolar bone grafting was done achieved score 1 (optimal marginal bone levels), whereas only 12 (25%) out of the 47 patients achieved score 1 amongst the late secondary alveolar bone graftings. Overall results showed, probability, P = .034 (statistically significant).

This study reaffirmed the fact that alveolar bone grafting when done in preadolescent age group (secondary alveolar bone grafting) gives better results in terms of marginal bony consolidation and maintaining the continuity of the alveolar arch, but the late presentation (late secondary alveolar bone grafting) should not be the refusal criteria for performing the alveolar bone grafting. Although the latter patients may not be rewarded in terms of bony consolidation as much as the preadolescent patients the potential of successful surgery in them still exists in terms of providing a platform for the dental implant placement, improvement in the soft tissue symmetry and aesthetics of the face.

We describe an approach to reanimation of complete, prolonged facial paralysis using minimally invasive temporalis tendon transfer (MIT3) by the melolabial or transoral approach. Objective outcome measures are evaluated based on symmetry, and grading of preoperative/post-operative results and the scar at the melolabial fold.

Retrospective cohort study.

Twenty-five patients undergoing the MIT3 technique were studied. Photographic analysis was used to determine the percentage of difference between the 2 sides (symmetry). Using the Delphi method to achieve consensus, a panel of experts graded pre/post-operative photos using the Terzis’ Facial Grading System and a 1 to 10 Likert-type scale and the melolabial scar using the Beausang Scar Scale.

Percentage of difference (symmetry) with smiling improved from 18.6% ± 1.5% (mean ± standard error of the mean [SEM]) preoperatively to 5.0 ± 0.9% (mean ± SEM) post-operatively. Expert grading by the Terzis system showed improvement post-operatively (mean 3.7/5; median 3.6/5) versus preoperatively (mean 1.5/5; median 1.2/5). Perceived improvement was also largely favourable (mean 8.1/10; median 8.0/10). Melolabial scar grading was favourable in terms of colour (mean 1.53/4), surface character (mean 1.05/2), contour (mean 1.60/4), and distortion (mean 1.74/4).

The MIT3 technique offers immediate, predictable, and symmetrical return of smile function. Objective symmetry analysis and favourable expert grading of both pre-/post-operative photographs and the scar at the melolabial fold demonstrate applicability for facial reanimation in patients where other procedures have failed, or when a direct return to function is desired. Both the melolabial approach and transoral approach were found to be acceptable and effective, although applicability varies.

Constriction bands in the majority of cases presents as a contour deformity. The gold standard of treatment is a single-stage constriction ring excision and serial Z-plasty. The expense is unsightly scarring. We present case reports of deformity correction by serial fat injections

Three case studies of children in whom this modality was used in limbs to correct the deformity are presented.

Two participants showed a good correction of the deformity and in a single-case treatment failed requiring excision and serial Z-plasty for correction.

Fat injection in combination with Khouri’s technique of aponeurotomies is an attractive modality of managing superficial constriction bands of limbs.