Waste Management & Research: The Journal for a Sustainable Circular Economy

The consumption of electrical and electronic equipment (EEE) is continuously increasing worldwide and, consequently, so is the amount of waste electrical and electronic equipment (WEEE) it generates at its end-of-life. In parallel to this growth, legislation related to this issue has been passed in different countries with the aim of improving the management of WEEE. In order to raise awareness about the situation in which the generation, composition, management or final treatment of this kind of waste currently finds itself, an extensive number of articles have been published around the world. The aim of this paper is to define and analyse the main areas of research on WEEE by offering a broader analysis of the relevant literature in this field published between 1992 and August 2014. The literature researched comprises 307 articles, which are analysed according to the topic they focus on (WEEE management, WEEE generation, WEEE characterisation, social aspects of WEEE, re-use of EEE or economic aspects of WEEE). In addition, a deeper analysis is also presented, which takes into account the temporal evolution (globally and by topic), location of the study, categories and subcategories analysed, etc.

Estimation of the municipal solid waste settlements and the contribution of each of the components are essential in the estimation of the volume of the waste that can be accommodated in a landfill and increase the post-usage of the landfill. This article describes an experimental methodology for estimating and separating primary settlement, settlement owing to creep and biodegradation-induced settlement. The primary settlement and secondary settlement have been estimated and separated based on 100% pore pressure dissipation time and the coefficient of consolidation. Mechanical creep and biodegradation settlements were estimated and separated based on the observed time required for landfill gas production. The results of a series of laboratory triaxial tests, creep tests and anaerobic reactor cell setups were conducted to describe the components of settlement. All the tests were conducted on municipal solid waste (compost reject) samples. It was observed that biodegradation accounted to more than 40% of the total settlement, whereas mechanical creep contributed more than 20% towards the total settlement. The essential model parameters, such as the compression ratio (C_c’), rate of mechanical creep (c), coefficient of mechanical creep (b), rate of biodegradation (d) and the total strain owing to biodegradation (E_DG), are useful parameters in the estimation of total settlements as well as components of settlement in landfill.

With its rapid development, the rural area of Southwest China has been puzzled by the waste management problem, especially for increasing solid waste and water pollution from the domestic waste. Therefore, in order to efficiently and effectively manage the domestic waste in the rural area of Southwest China, 22 villages were selected randomly to analyse the characteristics of domestic waste, the influence factors of characteristics and resident’s willingness of participation in domestic waste management by questionnaires, field samplings and laboratory tests. The results of the rural area of Southwest China indicated that the generation of domestic waste was 178 g d⁻¹ per capita and it was mainly composed of kitchen waste, inert waste, plastics and paper with a total proportion of 81.98%. The waste bulk density, moisture, ash, combustible and lower calorific value were 107 kg m⁻³, 37.04%, 25.73%, 37.23% and 8008 kJ kg⁻¹, respectively. These characteristics were influenced by the topography, the distance from towns or cities, the villagers’ ethnicities and income sources to some extent. Moreover, the distance of 50–800 m between each collection facility and the disposal fee of around ¥5.00 per household per month could be accepted. The working hours of participation in waste management is suggested as 5 hours per day with the income of ¥1000 per capita per month. Based on the outcome of this survey, a waste management system consisting of classified collection, centralised treatment and decentralised treatment was proposed. It is important to ensure financial viability and practical considerations of this system.

In this study, we report an extensive set of analytical results on the quality of the biogas produced by a landfill of automotive shredder residues. In particular, the investigation was directed towards the identification of a spectrum of polycyclic aromatic hydrocarbons (16 compounds) and a wide range of volatile organic compounds (35 compounds). This article highlights the most important indications of toxicological concern for the detected compounds. Among the polycyclic aromatic hydrocarbons, chrysene shows the highest concentration, followed by pyrene and benzo(b)fluoranthene. Dibenz(a,h)anthracene, the most carcinogenic of the tested compounds, displayed results below the limit of analytical detectability. Benzo(a)pyrene, another typical carcinogenic compound, was detected at low concentrations. With regard to volatile organic compounds, the survey revealed a relevant concentration of toluene (found in fuels and paint thinner) significantly higher than the other compounds. Noticeable amounts of hexane, trichloromethane, and acetone were also found.

The impact of co-digestion as opposed to separate digestion, on biogas and methane yield (apparent synergetic effects) was investigated for three biomass materials (pig manure, cow manure and food waste) under mesophilic conditions over a 36 day period. In addition to the three biomass materials (digested separately), 13 biomass mixtures (co-digested) were used. Two approaches for modelling biogas and methane yield during co-digestion, based on volatile solids concentration and ultimate gas and methane potentials, were evaluated. The dependency of apparent synergetic effects on digestion time and biomass mixture composition was further assessed using measured cumulative biogas and methane yields and specific biogas and methane generation rates. Results indicated that it is possible, based on known volatile solids concentration and ultimate biogas or methane yields for a set of biomass materials digested separately, to accurately estimate gas yields for biomass mixtures made from these materials using calibrated models. For the biomass materials considered here, modelling indicated that the addition of pig manure is the main cause of synergetic effects. Co-digestion generally resulted in improved ultimate biogas and methane yields compared to separate digestion. Biogas and methane production was furthermore significantly higher early (0–7 days) and to some degree also late (above 20 days) in the digestion process during co-digestion.

The present study was aimed to evaluate the role of Plant Growth Promoting Rhizobacteria (PGPR) in P solubilisation from rock phosphate through composting with poultry litter, and further to study the effects of prepared enriched composts on growth, yield, and phosphorus uptake of wheat crop. Various phosphorus-enriched composts were prepared from rock phosphate and poultry litter (1:10) with and without inoculation of plant growth promoting rhizobacterias (Pseudomonas sp. and Proteus sp.). Results showed that the rock-phosphate-added poultry litter had higher total phosphorus, available (Mehlic-3 extracted) phosphorus, microbial biomass (carbon and phosphorus), and lower total organic carbon, total nitrogen, and carbon/nitrogen ratio over poultry litter alone. Inoculation of Pseudomonas sp. with rock phosphate-added poultry litter showed maximum increase in available phosphorus (41% of total phosphorus) followed by Proteus sp. inoculation (30% of total phosphorus) over uninoculated treatment (23% of total phosphorus) on the 120th day of composting. Microbial biomass (carbon and phosphorus) increased up to Day 45 and tended to decrease till the 120th day of composting, irrespective of the treatments. However, in pot experiments, wheat seeds receiving inoculation with plant growth promoting rhizobacterias, subsequently treated with rock phosphate-enriched compost proved highly stimulatory to plant height, phosphorus uptake, grain yield, and seed phosphorus content over uninoculated untreated control. The plant growth promoting rhizobacterias inoculation can be a sustainable source releasing phosphorus from low grade rock phosphate through composting and application of rock phosphate-enriched compost can be an alternative to chemical fertilisers for better crop production.

In Mediterranean areas, olive mill wastes pose a major environmental problem owing to their important production and their high polyphenolic compounds and organic acids concentrations. In this work, the evolution of polyphenolic compounds was studied during co-composting of olive mill wastewater sludge and poultry manure, based on qualitative (G-50 sephadex) and quantitative (Folin–Ciocalteu), as well as high pressure liquid chromatography analyses. Results showed a significant polyphenolic content decrease of 99% and a noticeable transformation of low to high molecular weight fraction during the compost maturation period. During this step, polyphenols disappearance suggested their assimilation by thermophilic bacteria as a carbon and energy source, and contributed to humic substances synthesis. Polyphenolic compounds, identified initially by high pressure liquid chromatography, disappeared by composting and only traces of caffeic, coumaric and ferulic acids were detected in the compost. In the soil, the produced compost application improved the chemical and physico–chemical soil properties, mainly fertilising elements such as calcium, magnesium, nitrogen, potassium and phosphorus. Consequently, a higher potato production was harvested in comparison with manure amendment.

The preparation of chars and activated carbon as low-cost elemental mercury adsorbents was carried out through the carbonisation of coconut husk (pith and fibre) and the activation of chars with potassium hydroxide (KOH), respectively. The synthesised adsorbents were characterised by using scanning electron microscopy, Fourier transform infrared spectroscopy and nitrogen adsorption/desorption analysis. The elemental mercury removal performance was measured using a conventional flow type packed-bed adsorber. The physical and chemical properties of the adsorbents changed as a result of the carbonisation and activation process, hence affecting on the extent of elemental mercury adsorption. The highest elemental mercury (Hg°) adsorption capacity was obtained for the CP-CHAR (3142.57 µg g⁻¹), which significantly outperformed the pristine and activated carbon adsorbents, as well as higher than some adsorbents reported in the literature.

Identification of thermophilic and mesophilic bacteria and fungi in Esfahan (Iran) municipal solid waste compost by Ghazifard et al., Waste Manag Res June 2001; 19: 257-261, doi: 10.1177/0734242X0101900307.

In the above paper the fourth author’s name was misspelt, the correct spelling is below:

Zahra Etemadifar