In this study, wear and electrochemical corrosion behaviour of as-cast magnesium (Mg)/multiwall carbon nanotube (MWCNT) and plasma electrolytic oxidation (PEO) coated Mg/MWCNT samples were evaluated by dry sliding wear tests and potentiodynamic corrosion tests, respectively. In this respect, Mg/MWCNT composite was manufactured by stir casting route. X-ray diffraction (XRD) analysis shows that the presence of Mg, MgO and Mg2SiO4 phases for coated samples. The corrosion rate of the coated samples is about 1.6 times lower than that of un-coated Mg–MWCNT composite. From the wear tests, it is concluded that PEO coating leads to significant improvement in wear resistance in comparison with un-coated Mg/MWCNT composite. It is observed that wear mechanisms are abrasion and oxidation.
ZhiH, XingY, LiuY.Review of recent studies in magnesium matrix composites, J Mater Sci. 2004; 39: 6153–6171. doi: 10.1023/B:JMSC.0000043583.47148.31
2.
ShaoZ, CaiZ, ShiJ.Preparation and performance of electroless nickel on AZ91D magnesium alloy. Mater Manuf Process. 2016;31:1238–1245. doi: 10.1080/10426914.2015.1117625
3.
AydinF, TuranME.The effect of Boron Nitride on tribological behavior of Mg matrix composite at room and elevated temperatures. J Tribol. 2019. https://doi.org/10.1115/1.4044858.
4.
DeyA, PandeyKM.Magnesium metal matrix composites – a review. Rev Adv Mater Sci. 2015;42:58–67.
5.
ChampagneV, KaplowitzD, ChampagneVK, Dissimilar metal joining and structural repair of ZE41A-T5 cast magnesium by the cold spray (CS) process. Mater Manuf Process. 2018;33:130–139. doi: 10.1080/10426914.2016.1257137
6.
SuneeshE, SivapragashM.Comprehensive studies on processing and characterization of hybrid magnesium composites. Mater Manuf Process. 2018;33(12):1324–1345. doi: 10.1080/10426914.2018.1453155
7.
LalehM, KargarF, RouhaghdamAS.Formation of a compact oxide layer on AZ91D magnesium alloy by microarc oxidation via addition of cerium chloride into the MAO electrolyte. J Coat Technol Res.2011; 8:765–771. doi: 10.1007/s11998-011-9357-7
8.
SongGL, AtrensA.Corrosion mechanisms of magnesium alloys. Adv Eng Mater. 1999;1:11–33. doi: 10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N
9.
GhaliE, DietzelW, KaineKU.General and localized corrosion of magnesium alloys: a critical review. J Mater Eng Perform. 2004;13:7–23. doi: 10.1361/10599490417533
10.
ChenNXB, BirbilisTB.Abbott review of corrosion-resistant conversion coatings for magnesium and its alloys. Corrosion. 2011;67:1–16. doi: 10.5006/1.3563639
TekinKC, MalayogluU, ShresthaS.Tribological properties of plasma electrolytic oxide coatings on magnesium alloys. Tribol – Mater Surf Interfaces. 2012;6:67–74. doi: 10.1179/1751584X12Y.0000000006
13.
RaphealG, KumarS, ScharnaglN, Effect of current density on the microstructure and corrosion properties of plasma electrolytic oxidation (PEO) coatings on AM50 Mg alloy produced in an electrolyte containing clay additives. Surf Coat Technol. 2016;289:150–164. doi: 10.1016/j.surfcoat.2016.01.033
14.
MalayogluU, TekinKC.Wear behaviour of plasma electrolytic oxide coatings on E21 and WE43 Mg alloys. Surf Eng. 2015;31:526–533. doi: 10.1179/1743294414Y.0000000409
15.
BirssV, XiaS, YueR, Characterization of oxide films formed on Mg-based WE43 alloy using AC/DC anodization in silicate solutions. J Electrochem Soc. 2004;151:1–10. doi: 10.1149/1.1629095
16.
TooraniM, AliofkhazraeiM, GolabadiM, Effect of lanthanum nitrate on the microstructure and electrochemical behavior of PEO coatings on AZ31 Mg alloy. J Alloys Compd. 2017;719:242–255. doi: 10.1016/j.jallcom.2017.05.169
17.
ChenMA, OuYC, YuCY, Corrosion performance of epoxy/BTESPT/MAO coating on AZ31 alloy. Surf Eng. 2016;32:38–46. doi: 10.1179/1743294415Y.0000000105
18.
SrinivasanBP, LiangJ, BlawertC.A preliminary study of calcium containing plasma electrolytic oxidation coatings on AM50 magnesium alloy. J Mater Sci. 2010; 45:1406–1410. doi: 10.1007/s10853-009-4093-4
19.
RendonME, DuqueV, QuinteroD, Improved corrosion resistance of commercially pure magnesium after its modification by plasma electrolytic oxidation with organic additives. J Biomater Appl. 2018;33:725–740. doi: 10.1177/0885328218809911
20.
ArrabalR, MatykinaE, SkeldonP, Incorporation of zirconia particles into coatings formed on magnesium by plasma electrolytic oxidation. J Mater Sci. 2008;43:1532–1538. doi: 10.1007/s10853-007-2360-9
21.
YaoZ, GaoH, JiangZ.Structure and properties of ZrO2 ceramic coatings on AZ91D Mg alloy by plasma electrolytic oxidation. J Am Ceram Soc. 2008;91:555–558. doi: 10.1111/j.1551-2916.2007.02155.x
22.
ChangSY, LeeDH, KimBS, Characteristics of plasma electrolytic oxide coating on Mg-Al-Zn alloy prepared by powder metallurgy. Met Mater Int. 2009;15:759–764. doi: 10.1007/s12540-009-0759-8
SongYL, SunXY, LiuYH.Effect of TiO2 nanoparticles on the microstructure and corrosion behavior of MAO coatings on magnesium alloy. Mater Corros. 2012;63:813–818.
25.
WangY, WeiD, YuJ, Effects of Al2O3 nano-additive on performance of micro-arc oxidation coatings formed on AZ91D Mg alloy. J Mater Sci Technol. 2014;30:984–990. doi: 10.1016/j.jmst.2014.03.006
26.
SolimanH, HamdyAS.Effect of fluoride ions modifier and ceramic Al2O3 particles additives on plasma electrolytic oxidation of AZ31. Surf Eng. 2017;33:767–772. doi: 10.1080/02670844.2016.1214407
27.
HwangM, ChungW, Effects of a carbon nanotube additive on the corrosion-resistance and heat-dissipation properties of plasma electrolytic oxidation on AZ31 magnesium alloy. Materials. 2018;11:1–15.
28.
TuranME, SunY, AydınF.Influence of multi-wall carbon nanotube content on dry and corrosive wear performances of pure magnesium. J Compos Mater. 2018;52:3127–3135. doi: 10.1177/0021998318762294
29.
JamshidijamM, FakhrabadiAA, MasoudpanahSM.Wear behavior of multiwalled carbon nanotube/AZ31 composite obtained by friction stir processing. Tribol Trans. 2013;56:827–832. doi: 10.1080/10402004.2013.804969
30.
AungNN, ZhouW, GohCS.Effect of carbon nanotubes on corrosion of Mg–CNT composites. Corros Sci. 2010;52:1551–1553. doi: 10.1016/j.corsci.2010.02.025
31.
WangYQ, ZhengMY, WuK.Microarc oxidation coating formed on SiCw/AZ91 magnesium matrix composite and its corrosion resistance. Mater Lett. 2005;59:1727–1731. doi: 10.1016/j.matlet.2005.01.050
ChenQ, JiangZ, TangS, Influence of graphene particles on the micro-arc oxidation behaviors of 6063 aluminum alloy and the coating properties. Appl Surf Sci. 2017;423:939–950. doi: 10.1016/j.apsusc.2017.06.202
34.
MuhaffelF, CimenogluH.Development of corrosion and wear resistant micro-arc oxidation coating on a magnesium alloy. Surf Coat Technol. 2019;357:822–832. doi: 10.1016/j.surfcoat.2018.10.089
35.
FukudaH, SzpunarJA, KondohK, The influence of carbon nanotubes on the corrosion behaviour of AZ31B magnesium alloy. Corros Sci. 2010;52:3917–3923. doi: 10.1016/j.corsci.2010.08.009
