Characterizing Mechanical Properties of Particulate Nanocomposites Using Micromechanical Approach

Abstract

This research aims to propose a continuous micromechanical model for characterizing the mechanical properties of the nanocomposites containing silica nanoparticles embedded in polyimide matrix. The molecular structures of the nanocomposites were established through molecular dynamic (MD) simulation, from which the non-bonded gap as well as the non-bonded energy between the nano-sized inclusion and the surrounding matrix were evaluated. It was postulated that the normalized non-bonded energy (non-bonded energy divided by surface area of the inclusion) is correlated with the degree of interfacial interaction. Subsequently, an effective interphase micromechanical model including inclusion, matrix and effective interphase was developed, in which the dimension of the effective interphase was assumed equal to the non-bonded gap and the corresponding elastic stiffness was calculated from the normalized non-bonded energy. Comparison of the results calculated from the micromechanical model and the MD simulation indicates that the effective interphase model is capable of describing Young's modulus of particulate nanocomposites with accuracy. In addition, it was revealed that when the particulate size decreases, the corresponding modulus of the nanocomposites increases.

Keywords

nanocomposites MD simulation micromechanical model Young's modulus.

Get full access to this article

View all access options for this article.

References

Chen, B. and Sun, K. (2005). Poly (ε-caprolactone)/Hydroxyapatite Composites: Effects of Particle Size, Molecular Weight Distribution and Irradiation on Interfacial Interaction and Properties, Polymer Testing, 24(1): 64-70.

Chisholm, N. , Mahfuz, H. , Rangari, V.K. , Ashfaq, A. and Jeelani, S. (2005). Fabrication and Mechanical Characterization of Carbon/SiC-Epoxy Nanocomposites, Composite Structures, 67(1): 115-124.

Vollenberg, P.H.T. and Heikens , D. (1989). Particle Size Dependence of the Young's Modulus of Filled Polymers: 1. Preliminary Experiments, Polymer, 30(9): 1656-1662.

Vollenberg, P.H.T. , de Haan, J.W. , van de Van, L.J.M. and Heikens , D. (1989). Particle Size Dependence of the Young's Modulus of Filled Polymers: 2. Annealing and Solid-state Nuclear Magnetic Resonance Experiments, Polymer , 30(9): 1663-1668.

Cho, J. , Joshi, M.S. and Sun, C.T. (2006). Effect of Inclusion Size on Mechanical Properties of Polymeric Composites with Micro and Nano Particles, Composite Science and Technology, 66(13): 1941-1952.

Ng, C.B. , Ash, B.J. , Schadler, L.S. and Siegel, R.W. (2001). A Study of the Mechanical and Permeability Properties of Nano- and Micron-TiO2, Filled Epoxy Composites, Advanced Composites Letters, 10(3): 101-111.

Reynaud, E. , Jouen, T. , Gauthier, C. , Vigier, G. and Varlet, J. (2001). Nanofillers in Polymeric Matrix: A Study on Silica Reinforced PA6, Polymer, 42(21): 8759-8768.

Jiang, L. , Lam, Y.C. , Tam, T.C. , Chua, T.H. , Sim, G.W. and Ang, L.S. (2005). Strengthening Acrylonitrile-Butadiene-Stryene (ABS) with Nano-Sized and Micron-Sized Calcium Carbonate, Polymer, 46(1): 243-252.

Jordan, J. , Jacob, K.I. , Tannenbaum, R. , Sharaf, M.A. and Jasiuk, I. (2005). Experimental Trends in Polymer Nanocomposites-A Review, Materials Science and Engineering A, 393(1-2): 1-11.

10.

Odegard, G.M. , Clancy, T.C. and Gates, T.S. (2005). Modeling of the Mechanical Properties of Nanoparticle/Polymer Composites, Polymer, 46(2): 553-562.

11.

Cannillo, V. , Bondioli, F. , Lusvarghi , L. , Montorsi, M. , Avella, M. , Errico, M.E. and Malinconico , M. (2006). Modeling of Ceramic Particles Filled Polymer-Matrix Nanocomposites , Composites Science and Technology, 66(7-8): 1030-1037.

12.

Avella, M. , Bondioli, F. , Cannillo, V. , Errico, M.E. , Ferrari, A.M. , Focher, B. , Malinconico, M. , Manfredini, T. and Montorsi, M. (2004). Preparation, Characterisation and Computational Study of Poly (ε-caprolactone) Based Nanocomposites, Materials Science and Technology, 20(10): 1340-1344.

13.

Schmidt, D. , Shah, D. and Giannelis, E.P. (2002). New Advances in Polymer/Layered Silicate Nanocomposites, Current Opinion in Solid State and Materials Science, 6(3): 205-212.

14.

Wang, H. , Bai, Y. , Liu, S. , Wu, J. and Wong, C.P. (2002). Combined Effects of Silica Filler and Its Interface on Epoxy Resin, Acta Materialia, 50(17): 4369-4377.

15.

Wetzel, B. , Haupert, F. and Zhang, M.Q. (2003). Epoxy Nanocomposites with High Mechanical and Tribological Performance, Composites Science and Technology , 63(14): 2055-2067.

16.

Laine, R.M. , Choi, J. and Lee , I. (2001). Organic-Inorganic Nanocomposites with Completely Defined Interfacial Interactions , Advanced Materials, 13(11): 800-803.

17.

Ashby, M.F. and Jones, D.R. (1980). Engineering Materials 1: An Introduction to Their Properties and Applications, Pergamon Press, Oxford, UK.

18.

Material Studio, Ver.4.0. Accelrys Inc. , San Diego, CA.

19.

20.

Nemat-Nasser, S. and Hori, M. (1993). Micromechanics: Overall Properties of Heterogeneous Materials, North-Holland - Amsterdam, London.

21.

Hori, M. and Nemat-Nasser, S. (1993). Double-Inclusion Model and Overall Moduli of Multi-Phase Composites, Mechanics of Materials, 14(3): 189-206.

22.

Mori, T. and Tanaka, K. (1973). Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions, Acta Metallurgica , 21(5): 571-574.

23.

Eshelby, J.D. (1957). The Determination of the Elastic Field of an Ellipsoidal Inclusion and Related Problems, Proceedings of the Royal Society of London. Series A, 241(1226): 376-396.

24.

Toshio, M. (1982). Micromechanics of Defects in Solids, Martinus Nijhoff, The Hague.

25.

Theodorou, D.N. and Suter, U.W. (1986). Atomistic Modeling of Mechanical Properties of Polymeric Glasses, Macromolecules , 19(1): 139-154.

26.

Allen, M.P. and Tildesley, D.J. (1987). Computer Simulation of Liquids, Clarendon Press, Oxford.

27.

Shames, I.H. and Cozzarelli, F.A. (1992). Elastic and Inelastic Stress Analysis, Prentice-Hall, New Jersey .

28.

Adrian, A. , Sun, C.T. and Mahfuz, H. (2005). Effective of Particle Size Mechanical Properties of Polymer Nanocomposites, Proceedings of the American Society for Composites the 20 Technical Conference, Drexel University, Philadelphia, PA, September 7-9.