This study is aimed to evaluate the influence of a number of parameters within the context of composite structure optimization. In particular, the nature of the component materials and all of the possible orientations were studied. Problems optimizing elementary plates and structures modeled using finite elements were treated using a genetic algorithm. The results were used to define the relative importance of these parameters and to derive simple design rules that would reliably obtain a high-performance configuration.
Pai, N., Kawa, A. and Weng, M. ( 2003). Optimization of Laminate Stacking Sequence for Failure Load Maximization Using Tabu Search, Composites: Part B, 34: 405-413.
2.
Erdal, O. and Sonmez, F.O. ( 2005). Optimum Design of Composite Laminates for Maximum Buckling Load Capacity Using Simulated Annealing, Composite Structures , 71: 45-52.
3.
Todoroki, A. and Haftka, R.T. (1998). Stacking Sequence Optimization by a Genetic Algorithm with a New Recessive Gene Like Repair Strategy, Composites Part B, 29B: 277-285.
4.
Liu, B., Haftka, R.T., Akgün, M.A. and Todoroki, A. ( 2000). Permutation Genetic Algorithm for Stacking Sequence Design of Composite Laminates, Compuational Methods in Applied Mechanics and Engineering, 186: 357-372.
5.
Abu-Odeh, A.Y. and Jones, H.L. (1998). Optimum Design of Composite Plates Using Response Surface Method, Composite Structures , 43: 233-242.
6.
Gantovnik, B.V. , Gürdal, Z. and Watson, L.T. (2002). A Genetic Algorithm with Memory For Optimal Design of Laminated Sandwich Composite Panels, Composite Structures, 58: 513-520.
7.
Lin, C.C. and Lee, Y.J. (2004). Stacking Sequence Optimization of Laminated Composite Structures Using Genetic Algorithm with Local Improvement , Composite Structures, 63: 339-345.
8.
Todoroki, A. and Ishikawa, T. ( 2004). Design of Experiments for Stacking Sequence Optimizations With Genetic Algorithm Using Response Surface Approximation, Composite Structures, 64: 349-357.
9.
Messager, T., Pyrz, M., Gineste, B. and Chauchot, P. ( 2002). Optimal Laminations of Thin Underwater Composite Cylindrical Vessels, Composite Structures, 58: 529-537.
10.
Pelletier, J.L. and Vel, S.S. (2006). Multi-objective Optimization of Fiber Reinforced Composite Laminates for Strength, Stiffness and Minimal Mass, Computers and Structures, 84: 2065-2080.
11.
Park, J.H., Wang, J.H., Lee, C.S. and Hwang, W. ( 2001). Stacking Sequence Design of Composite Laminates for Maximum Strength Using Genetic Algorithms, Composite Structures, 52: 217-231.
12.
Walker, M. and Smith, R.E. ( 2003). A Technique for the Multiobjective Optimisation of Laminated Composite Structures Using Genetic Algorithms and Finite Element Analysis , Composite Structures, 62: 123-128.
13.
Park, C.H., Lee, W.I., Han, W.S. and Vautrin, A. ( 2003). Weight Minimization of Composite Laminated Plates with Multiple Constraints, Composites Science and Technology, 63: 1015-1026.
14.
Rahul, Chakraborty, D. and Dutta, A. (2005). Optimization of FRP Composites Against Impact Induced Failure Using Island Model Parallel Genetic Algorithm , Composites Science and Technology, 65: 2003-2013.
15.
Adams, D.B. , Watson, L.T., Gürdal, Z. and Anderson-Cook , C.M. (2004). Genetic Algorithm Optimization and Blending of Composite Laminates by Locally Reducing Laminate Thickness, Advances in Engineering Software , 35: 35-43.
16.
Soremekun, G., Gürdal, Z., Kassapoglou, C. and Toni, D. (2002). Stacking Sequence Blending of Multiple Composite Laminates Using Genetic Algorithms, Composite Structures, 56: 53-62.
17.
Kristinsdottir, B.P., Zabinsky, Z.B., Tuttle, M.E. and Neogi, S. (2001). Optimal Design of Large Composite Panels with Varying Loads, Composite Structures , 51: 93-102.
18.
Soden, P.D. , Hinton, M.J. and Kaddour, A.S. (1998). A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates , Composites Science and Technology, 58: 1225-1254.
19.
Schapery, R.A.On the Characterization of Non Linear Viscoelastic Materials, Polymer Engineering and Science, 9(4): 295-310.
20.
Krempl, E. and Hong, B.Z. ( 1989). A Simple Laminate Theory Using the Orthotropic Viscoplasticity Theory Based on Overstress, Part I: In-plane Stress-strain Relationships for Metal Matrix Composites. Composite Science and Technology , 35: 53, 74.
21.
Sun, C.T. and Chen, J.L. (1989). A Simple Flow Rule for Characterizing Nonlinear Behavior of Fiber Composites, Journal of Composite Materials, 23(10): 1009-1020.
22.
Sun, C.T. and Zhu, C. (2000). The effect of Deformation-induced Change of Fiber Orientation on the Non-linear Behavior Of Polymeric Composite Laminates, Composites Science and Technology, 60: 2337-2345.
23.
Gates, T.S. and Sun, C.T. (1991). Elastic/Viscoplastic Constitutive Model for Fiber-reinforced Thermoplastic Composites, AIAA Journal, 29(3): 457-463.
24.
Thiruppukuzhi, S.V. and Sun, C.T. (2001). Models for the Strain-rate-dependent Behavior of Polymer Composites, Composites Science and Technology , 61: 1-12.
25.
Weeks, C.A. and Sun, C.T. (1998). Modeling Non-linear Rate-dependent Behavior in Fibre-Reinforced Composites, Composites Science and Technology, 58: 603-611.
26.
Ladeveze, P. and Le Dantec, E. (1992). Damage Modelling of the Elementary Ply for Laminated Composites, Composites Science and Technology, 43: 257-266.
27.
Liu, K.S. and Tsai, S.W. (1998). A Progressive Quadratic Failure Criterion for a Laminate, Composites Science and Technology , 58: 1023-1032.
28.
Puck, A. and Schürmann, H. ( 2002). Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models, Composites Science and Technology , 62: 1633-1662.
29.
Hashin, Z. ( 1980). Failure Criteria for Unidirectional Fiber Composites , Journal of Applied Mechanics, 47: 329-334.
30.
Gay, D. ( 1997). Matériaux Composites, Hermes , Paris.
31.
Soremekun, G. , Gürdal, Z., Haftka, R.T. and Watson, L.T. (2001). Composite Laminate Design Optimization by Genetic Algorithm with Generalized Elitist Selection , Computers and Structures, 79: 131-143.
32.
Zitzler, E. and Thiele, L. ( 1998). An Evolutionary Algorithm for Multiobjective Optimization: The Strength Pareto Approach, TIK-Report no. 43.
33.
Rhee, S.Y., Cho, M. and Kim, H.S. ( 2006). Layup Optimization with GA for Tapered Laminates with Internal Plydrops, International Journal of Solids and Structures , 43: 4757-4776.
34.
Kim, J.S. , Kim, C.G. and Hong, C.S. (1999). Optimum Design of Composite Structures with Ply Drop Using Genetic Algorithm and Expert System Shell, Composite Structures, 46: 171-187.
35.
Batoz, J.L. and Dhatt, G. ( 1990). Modélisation Des Structures Par Elements Finis, Vol. 2, Poutres et Plaques, Hermes, Paris.
36.
Bruyneel, M. ( 2006). A General and Effective Approach for the Optimal Design of Fiber Reinforced Composite Structures, Composites Science and Technology, 66: 1303-1314.
