Knowledge-Based Expert System for Optimal Stacking Sequence Design of Composite Structures

Abstract

This paper expounds the development of a knowledge-based expert system for the optimal strength design of composite structures subjected to various loading conditions and rules of design heuristics. The optimal stacking sequences are obtained by integration of a knowledge-based expert system, genetic algorithm and finite element analysis. Because this expert system in optimal stacking sequence design adopts a finite element method as a stress analysis tool, it isn't limited to laminate design but can be applied to a general composite structure. The optimal stacking sequence combination is drawn from discrete ply angles and rules of design heuristics stored in the knowledge-base for the given application of interest. Results of this study were verified through comparison with quasi-isotropic lay-ups.

Keywords

knowledge-based expert system genetic algorithm rules of design heuristics composite laminates finite element method optimal stacking sequence

Get full access to this article

View all access options for this article.

References

1. Schmit, L. A. and Farshi, B. 1973. "Optimum Laminate Design for Strength and Stiffness," Int. J. for Numerical Methods in Engineering, 7:519-536.

2. Liao, D. X. , Sung, C. K. and Thompson, B. S. 1986. "The Optimal Design of Symmetric Laminated Beams Considering Damping," JCM, 20:485-501.

3. Kam, T. Y. and Lai, F. M. 1995. "Maximum Stiffness Design of Laminated Composite Plates via a Constrained Global Optimization Approach," Composite Structures, 32:391-398.

4. Webber, J. P. H. and Morton, S. K. 1990. "An Expert System for Laminated Plate Design Using Composite Materials," Comput. & Struct., 37:1051-1067.

5. Wu, C. M. L. , Webber, J. P. H. and Morton, S. K. 1991. "A Knowledge Based Expert System for Laminated Composite Strut Design," Aeronautical J., 95:1-20.

6. Wu, C. M. L. 1992. "Bolted Joints in a Laminated Composite Strut Design Expert System," Composite Structures, 22:63-85.

7. A. Todoroki , N. Sasada and Mitsunori, M. 1996. "Object-Oriented Approach to Optimize Composite Laminated Plate Stiffness with Discrete Ply Angles," JCM, 30:1020-1041.

8. Kim, J. S. , G. G. Kim , and C. S. Hong . 1998. "Design of Composite Laminates Using Expert System and Enumeration Method," J. of the Korean Society for Composite Materials, 11:48-49.

9. Kim, C. G. , J. S. Kim , and C. S. Hong . 1998. "Stacking Sequence Design of Composite Laminate Using Expert System," ICCE-5, Las Vegas, Nevada, 5th-11th July.

10.

10. CLIPS User's Guide, Artificial Intelligence Section, NASA/Johnson Space Center, 1993.

11.

11. CLIPS Basic Programming Guide, Artificial Intelligence Section, NASA/Johnson Space Center, 1993.

12.

12. Haftka, R. T. and Z. Gurdal , Elements of Structural Optimization, Kluwer Academic Publishers, 1992.

13.

13. Military Handbook 17, Vol. 3, Department of Defense and Federal Aviation Administration, 1996.

14.

14. Composite Design Manual, Bell Helicopter TEXTRON.

15.

15. Northrop Composite Design Manual, Northrop Coporation.

16.

16. Middleton, D. H. , Composite Materials in Aircraft Structures, John Wiley & Sons, Inc., New York, 1990.

17.

17. Kim, D. M. and C. S. Hong . 1992. "A Simple Sublaminate Approach to the Design of Thick Composite Laminates for Suppression of Free-edge Delamination," Composites Science and Technology, 43:147-158.

18.

18. Rybicki, E. F. and D. W. Schmueser . 1978. "Effect of Stacking Sequence and Lay-Up Angle on Free Edge Stresses Around a Hole in a Laminated Plate Under Tension," JCM, 12:300-313.

19.

19. Goldberg, E. Genetic Algorithms in Search, Optimization and Machine Learning. Addison Wesley, Boston, MA, 1989.

20.

20. Reddy, J. N. Energy and Variational Methods in Applied Mechanics, John Wiley & Sons, Inc., New York, 1984.

21.

21. Reddy, J. N. and A. K. Pandey . 1987. "A First-Ply Failure Analysis of Composite Laminates," Computers & Structures, 25:371-393.